Samsung Version 1.1 Manual de usuario
WEB
WEB
TRANSMITTER
SNS-110 Owner's Manual
(Version 1.1)
124
2
[Power Adapter]
You must use only a compatible power adapter enclosed in SNS-110 package.
[Fuse]
You must use only an identical fuse (250V, T3.15A) used in SNS-110.
[Battery]
You must use only batteries (DC3V) applicable to SNS-110 usage to avoid
explosion risk.
This manual is the basic guide for all Web Transmitter SNS-110 users.
It mainly illustrates product background, installation method, and connection through web browsers
as well as GUI (Graphic User Interface) after connection.
Please, familiarize yourself of the contents in this manual before using SNS-110 product.
Make sure you refer to an expert when opening the outer case for the purpose of repair.
Also, if you have any inquiries or you suspect any damage in the product, please consult to your
local dealer.
Warning
Before You Begin
3
Regulation Approval
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interface in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient of relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
4
Chapter 1. SNS-110 Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6
Overview
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6
Functions and Feature
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6
Names and Function
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
Chapter 2. Installing SNS-110 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
Setting Configuration
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
Cautions in Installation
--------------------------------------------11
Unpacking
--------------------------------------------------- 14
Chapter 3. Connecting to Instruments --------------------------------15
Connecting to Camera and Video Image Players
----------------------------15
Connecting to External Instruments
-----------------------------------16
Connecting to Network
-------------------------------------------17
Connecting to Alarm Sensors and External Devices
--------------------------18
Connecting to PAN/TILT/ZOOM/FOCUS Camera Controller
--------------------- 19
Connecting to RS-232C
--------------------------------------------20
Creating RS-232C Cable
------------------------------------------- 21
Terminal Emulation Communication Set-up
-------------------------------- 21
Creating Ethernet Cable
------------------------------------------ 22
Chapter 4. Setting an IP Address -----------------------------------23
Before You Begin
-----------------------------------------------23
Setting in Ethernet
----------------------------------------------24
Setting in Unix
------------------------------------------------26
Setting with IP Installer
------------------------------------ 28
Setting Other Network Information
------------------------------------ 32
Changing IP Address
--------------------------------------------32
In Cable Network through Cable Modem
---------------------------------33
Chapter 5. SNS-110 Log-in ----------------------------------------34
Ideal Specification
----------------------------------------------35
Log in through Netscape
------------------------------------------34
Log in through Explorer
-------------------------------------------35
Chapter 6. Application Mode (Video Image Monitoring Mode) ---------------39
Initial Screen
--------------------------------------------------39
Single Screen
-------------------------------------------------39
Quadruplex Screen
----------------------------------------------40
Automatic Sequential Screen
--------------------------------------- 40
Single Screen with PAN/TILT/ZOOM Controllers
----------------------------41
Table of Contents
Chapter 7. Administration Mode ------------------------------------ 42
Initial Screen
--------------------------------------------------42
Camera Set-up
------------------------------------------------43
PAN/TILT/ZOOM Set-up
------------------------------------------45
Quad/Sequential Set-up
-------------------------------------------46
Web Transmitter Set-up
-------------------------------------------47
Alarm/Relay Set-up
----------------------------------------------50
Network Set-up
------------------------------------------------52
File Transter Set-up
---------------------------------------------55
Custom User Interface Set-up
---------------------------------------57
ABOUT/SUPPORT/HELP
-----------------------------------------58
Appendix A ---------------------------------------------------60
SNS-110 Specifications
-------------------------------------------61
Appendix B ---------------------------------------------------64
Factory Default
------------------------------------------------65
Appendix C ---------------------------------------------------67
How to use Console
---------------------------------------------68
Appendix D ---------------------------------------------------77
Dynamic IP Information Transfer
------------------------------------- 78
Appendix E ---------------------------------------------------84
FAQ
------------------------------------------------------ 85
5
?
6
Chapter 1 SNS-110 Overview
Overview
SNS-110, connected to surveillance cameras or other external devices, compresses video image as
motion JPEG through zip algorithm and transmits it to a remote party through network (Ethernet, cable
modem).
SNS-110 may be connected to maximum of 4 video images and concurrently transmits the image in a
form of single screen, quadruplex screen, or automatic sequential screen.
Also, this system provides remote users in the Internet with alarm processing function and remote control
on PAN/TILT/ZOOM/FOCUS, succeeding in an extensive range of applications.
Functions and Features
●This system transmits real time images at any time with the network (Ethernet, cable modem) present.
●Users in the Internet are not required of additional S/W installation to receive the concurrent video
images, but may Log-in simply by accessing SNS-110 IP address with the existing web browser (such
as Netscape or Explorer).
●Users may select a type of screen, among Single Screen, Quadruplex Screen, and Automatic
Sequential Screen, and also may choose, at his or her preference, transmitting speed and resolution.
"Automatic Sequential" Screen provides the sequential and automatic changes in
size of the input images, depending on how the user has set up.
●This system transmits the image to the registered e-mail address at a particular point of time, by
setting up the alarm.
●Users may conveniently remote-control PAN/TILT/ZOOM/FOCUS under RS485 connection.
●Although the transmitted images are not locked in any way, users may set up ID and access
password.
●This system is usable regardless of the region because the image broadcasting system (NTSC/PAL) is
detected and operated with autornatic recognition.
●Auto terminal resistance function automatically withdraws the terminal resistance of 75Ωwith the video
loop (loop through) connection.
●You can send video image files through FTP server at certain time or in regular intervals. Users can
access the FTP server and search the saved video files.
●You can change the LOGO image on SNS-110 screen, or background color or font colors.
Search SNS-110 to download the latest software at http://www.samsungelectronics.com/
7
8
①
Video In
②
Video Out
(Loop Through Out)
③
Control S/W
④
F H (S/W)
⑤
Tx R (S/W)
⑥
Rx R (S/W)
⑦
Network LED
⑧
Power LED
Preset Button
Reset Button
2
1
879
10
43
34
5 6
1.CONTROL 2.F/H 3.Tx R 4.Rx R
Names and Function
Familiarize yourself with the names and function of each part on the front and back panels, before
installing SNS-110.
Front View of SNS-110
Receives input from maximum of 4 video image signals.
Transmit the image output to cameras or other external video-imaging devices
❈
When connected, the terminal resistance of 75
Ω
is automatically seized.
Off : when using as console purpose with RS-232C port connected to a PC
On : when RS-232C is to be connected to an External Modem.
❈The current version does not support connecting an External Modem.
Off : use the RS-485 on the reverse side as Half Duplex
On : use the RS-485 on the reverse side as Full Duplex TX mode
Off : Tx Termination resistance 120 Ωoff
On : Tx Termination resistance 120 Ωon
Off : Rx Termination resistance 120 Ωoff
On : Rx Termination resistance 120 Ωon
Blinks when sending or receiving data with the proper connection.
Indicates the power on/off.
Returns to the initial set-up environment of factory default
Restarts SNS-110 without turning off the power.
Name Function
9
Rear of SNS-110
Connects to maximum of 4 alarm sensors.
Connected to the external device for remote control
Connects to RS-485 cable and remotely regulate
PAN/TILT/ZOOM/FOCUS
controllers.
Full Duplex : use RX and TX.
Half Duplex : use TX .
Connects to console and an external modem through
the RS-232C cable connection.
❈ You are recommended to use the RS-232C
cable packed with this
SNS-110.
❈The current version does not support
connecting an External Modem.
Connects to Ethernet (10BaseT/110BaseT) and cable
modem network.
Supplies the power to SNS-110 with a DC 5V input
terminal
❈Only use the compatible adapter enclosed in
the SNS-110 package and supply DC 5V.
①
Alarm Input(1,2,3,4)
②
R/O (Relay Out)
③
RS-485(+,-)
④
RS-232C
⑤
Network Port
⑥
Power In
Name Function
123456
RS-232C ETHERNET DC 5V
ALARM IN
R/O RX TX
1 2 3 4 - + - +
RA
RC
GG
Sensor Input : 1,2,3,4
Signal GND : G
RA
RC
RX(+,-)
TX(+,-)
9Pin DSub Connector
RJ-45 Connector
10
Chapter 2 Installing SNS-110
The fluctuation of operation voltage must be within 10% of the regulation
voltage, and the electric outlet must be always grounded. Electric heat
devices, such as, hair dryers, irons, refrigerators, etc., must not be co-used in
the same outlet with SNS-110. AVR is recommended for stable power supply.
Caution
Preparation and installation of SNS-110
Setting Configuration
Please, familiarize yourself of the safe condition of SNS-110 installation.
This product must be horizontally stabilized and not be sloped or vertically positioned. Positioning and
properly centering its wiring room are crucial for its aptitude function. If the devices are too near with each
other, or if the ventilation is not sufficient, it may trigger the system malfunction and make its maintenance
as well as repair difficult to achieve.
The place must be well ventilated and the case cover must be firmly attached together to avoid system
malfunction or system shutdown by external factors. Certain inner parts are extremely susceptible to
abnormal environment, therefore do not open the case.
SNS-110 must be kept in the place with constant temperature and humidity as indicated below.
●Operation Temperature : 0oC ~ 40oC
●Storage Temperature : -20oC ~ 60oC
●Operation Humidity : 20% ~ 85% RH
●Storage Humidity : 20 ~ 85% RH
●Input Voltage: DC 5V
Adapter Input Voltage (AC 110 ~ 240V, 50/60Hz, 0.5A)
Adapter Output Voltage (DC +V, 3A)
●Power Consumption : 12 W or below
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Transmisor de Samsung
Manuales populares de Transmisor de otras marcas
Dejero
Dejero EnGo 3x Manual de usuario
Rosemount
Rosemount 4600 Manual de usuario
Speaka Professional
Speaka Professional 2342740 Manual de usuario
trubomat
trubomat GAB 1000 Manual de usuario
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manual de usuario
Rondish
Rondish UT-11 Manual de usuario
