Samsung ADT Security Hub Manual de usuario

ADT Security Hub

User Guide

This User Guide provides an introduction to the key features

of the ADT Security Hub. Visit SmartThings.com/Support-ADT

for more detailed information and customer support.

Contents

Intrusion Detection

• Introduction

• Arming the system

• Arming the system and bypassing detectors

• Disarming the system

• In the event of an intrusion

• In the event of a false alarm

• Advanced intrusion detection

• Home button

• Emergency button

• Manually notifying ADT

• System icons

• Local Walk Test

ADT Security Hub

Life Safety

• Introduction

• In the event of smoke or extreme temperatures

• In the event of carbon monoxide

• In the event of a water leak

Security Codes

• Master user code

• User codes

System Settings

Transferring Your ADT Security Hub

AADT Security Hub

Home button

• No lights: The system is not ready to be armed. One or

more protected doors or windows are open.

• Green: The system is ready to be armed. All protected

doors and windows are closed.

• Flashing green: The system is ready to be armed. All

protected doors and windows are closed but there is a

power outage.

• Flashing orange: The system is not ready to be armed. One

or more protected doors or windows are open, and there is

a power outage.

ADT Security Hub

Use the Home button to wake your ADT Security Hub from sleep

mode or to return to the Home screen. The Home button will

change color to show the status of your system:

• Red: The system is armed.

• Flashing red: The system is armed and an alarm has been

triggered.

Emergency Button

Home Screen

Home Button

Press the Emergency button to manually notify ADT of a panic,

re, or emergency event.

The touchscreen will display buttons for Panic, Fire, and Emergency.

Requires an optional ADT professional monitoring service.

Visit SmartThings.com/ADT for more information.

ADT Security Hub

Manually notifying ADT

ADT Security Hub

Use the Emergency button to manually notify ADT of a panic,

re, or emergency event.

The Emergency button changes color to show the status of

your system:

• No lights: The emergency button is not available.

• White: The emergency button is ready for use.

• Blinking white: An emergency alarm is in progress.

Emergency button

Requires an optional ADT professional monitoring service.

Visit SmartThings.com/ADT for more information.

Press and hold one of the Panic, Fire, or Emergency buttons for two

seconds. Your ADT Security Hub will notify ADT and an operator will

respond according to the terms of your monitoring service.

For compliance with ANSI/SIA CP-01-2010 and to help reduce the risk of

false alarms, you must press the Emergency button on the ADT Security

Hub, and then press and hold one of the Panic, Fire, or Emergency icons

for two seconds.

The following icons may appear at the top of the touchscreen:

System icons

ADT Security Hub ADT Security Hub

Power Connected

Power Not Connected

Low Backup Battery

System Sounds On

System Sounds Off

(Siren still active)

Dim Touchscreen

(Touch to dim screen)

Incoming Messages

(Touch to see messages)

Panic, Fire, and Emergency buttons on your ADT Security Hub:

BIntrusion Detection

Intrusion detection is provided by devices such as the ADT Door

and Window Detector or the ADT Motion Detector. These devices

are only active when armed by your ADT Security Hub.

If your home is protected by an ADT professional monitoring

service, the ADT Security Hub will activate the alarm siren and

notify ADT as soon as an intrusion is detected and initiate an

emergency response.

If your home is not protected by an ADT professional monitoring

service, the ADT Security Hub will activate the alarm siren as soon

as an intrusion is detected but will not notify ADT.

Visit SmartThings.com/ADT for more details on ADT professional

monitoring services and to see the full list of compatible detectors

and alarms.

Introduction

It is strongly recommended that you perform a weekly test of your

ADT Security Hub, detectors, and alarms:

Local walk test

Select System Settings from the Home screen.

Enter the Master User Code.

Select Walk Test.

Select Sensors Test and follow the on-screen instructions.

Select Console Test and follow the on-screen instructions.

Tap or the Home button to exit Test Mode.6.

ADT Security Hub

• If a detector fails the Sensors Test, check that it’s

been installed correctly or visit SmartThings.com/

Support-ADT for assistance.

Press the Arm Stay button to arm the system when people or

large pets will remain in the house. This will arm all ADT Door and

Window Detectors but will not arm any ADT Motion Detectors. The

alarm will be activated if a protected door or window is opened.

Arming the system

Intrusion Detection

Press the Arm Away button to arm the system when everyone

leaves the house. This will arm all ADT Door and Window Detectors,

and all ADT Motion Detectors. The alarm will be activated if a

protected door or window is opened, or if motion is detected.

Pressing the Arm Away button will start a 60-second exit delay

countdown. This will give you enough time to leave the house

before the system is armed.

Intrusion Detection

Arm AwayArm Stay

If you try to arm the system while protected doors or windows are

still open, the ADT Security Hub will display a list of sensors that

are not ready to be armed.

Arming the system and bypassing detectors

You can press the Silence button to silence the countdown, or you

can press the Disarm button to cancel the countdown and leave

the system unarmed.

Intrusion DetectionIntrusion Detection

Disarm ButtonSilence Button

You can close the open doors or windows to remove the

warnings, or you can bypass these sensors by pressing the

Bypass All button and entering your user code.

Bypassed sensors do not protect doors or windows, and will

not activate the alarm siren, notify ADT, or send an alert to your

smartphone in the event of an intrusion. Bypassed sensors revert

to normal operation when the alarm system is next armed.

If the system is armed in Away Mode, it must be disarmed within

30 seconds of entering the house through a protected door or area.

Disarming the system

Press the Disarm button and enteryour user code to disarm the

system.

If the system is armed in Stay mode, it must be disarmed before

leaving the house through a protected door.

Intrusion DetectionIntrusion Detection

Disarm Button

You can also press the Quick Exit button to temporarily disarm

protected doors and start a 60-second exit delay countdown. This

will give you enough time to leave the house before the system is

re-armed.

Intrusion Detection

In the event of an intrusion

Areas protected by an ADT Motion Detector

The alarm siren will be activated immediately and continue

sounding for 4 minutes, or until a correct user code is entered

on the ADT Security Hub to disarm the system.

Doors and windows protected by an ADT Door and Window

Detector

The alarm siren will be activated immediately and continue

sounding for 4 minutes, or until a correct user code is entered

on the ADT Security Hub to disarm the system.

Intrusion Detection

Entry/exit doors protected by an ADT Door and Window Detector

The system will start a 30-second entry delay countdown,

giving you enough time to disarm the system by entering a

correct user code on the ADT Security Hub. If the system is not

disarmed in time, the alarm siren will be activated for 4 minutes

or until a correct user code is entered.

Quick Exit Button

Tabla de contenidos

Otros manuales de Sistema de seguridad de Samsung

Samsung

Samsung SSA-C100 Manual de usuario

Samsung

Samsung SSC-12P Manual de usuario

Samsung

Samsung SSC-12 Manual de usuario

Samsung

Samsung SMO-150QP Manual de usuario

Samsung

Samsung SMT-190DN - Monitor + DVR Manual de usuario

Samsung

Samsung Wisenet SNK-B73040BW Manual de usuario

Samsung

Samsung SSC-17TQ Manual de usuario

Samsung

Samsung SmartThings ADT Carbon Monoxide Alarm Manual de usuario

Samsung

Samsung SSC-21WEB Manual de usuario

Samsung

Samsung SMARTCAM A1 Manual de usuario

Samsung

Samsung SDE-5003 Manual de usuario

Samsung

Samsung SSA-M2000 Manual de usuario

Samsung

Samsung SDR-B74301 Manual de usuario

Samsung

Samsung SDS-P5082 Manual de usuario

Samsung

Samsung SCU-9051 Manual de usuario

Samsung

Samsung SEW-3037W Manual de usuario

Samsung

Samsung SDS-P5080 Manual de usuario

Samsung

Samsung SSC17WEB Manual de usuario

Samsung

Samsung SDH-P4041 Manual de usuario

Samsung

Samsung SDH-C5100 Manual de usuario

Samsung

Samsung SSA-S4000 Manual de usuario

Samsung

Samsung SMO-151QN/XAAV Manual de usuario

Samsung

Samsung SSA-R1001 Manual de usuario

Samsung

Samsung SSA-S2100 Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario