Samsung Wisenet SDC-9443DF Manual de usuario

SDC-9443DF

1080p HD Analog Dome Camera

User Manual

Hanwha Techwin

Trademark

Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered

trademark of their respective company.

Restriction

Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially

or wholly, without formal authorization.

Disclaimer

Hanwha Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal

guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.

Hanwha Techwin reserves the right to change the contents of this document without prior notice.

Design and specications are subject to change without prior notice.

1080p HD Analog Bullet Camera

User Manual

English _3

● OVERVIEW

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth.

(Do not use a detergent or cosmetic products that contain alcohol, solvents or surfactants or oil constituents

as they may deform or cause damage to the product.)

7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and

the point where they exit from the apparatus.

11. Only use attachments/ accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lighting storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate normally, or has been dropped.

overview

4_ overview

overview

SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that dangerous voltage consisting a risk of electric shock is present within

this unit.

This exclamation point symbol is intended to alert the user to the presence of important operating

and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING

• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation

instructions.

WARNING

1. Be sure to use only the standard adapter that is specified in the specification sheet.

Using any other adapter could cause fire, electrical shock, or damage to the product.

2. Incorrectly connecting the power supply or replacing battery may cause explosion, fire, electric shock, or

damage to the product.

3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal heat

generation or fire.

4. Securely plug the power cord into the power receptacle. Insecure connection may cause fire.

5. When installing the camera, fasten it securely and firmly. The fall of camera may cause personal injury.

6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with water

on top of the camera. Doing so may cause personal injury due to fire, electric shock, or falling objects.

7. Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock.

8. If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately

disconnect the power source and contact the service center. Continued use in such a condition may cause

fire or electric shock.

9. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this

product in any way. (Hanwha Techwin is not liable for problems caused by unauthorized modifications or

attempted repair.)

10. When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric

shock.

English _5

● OVERVIEW

CAUTION

1. Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to

excessive vibration or magnetic interference.

2. Do not install in a location subject to high temperature, low temperature, or high humidity. Doing so may

cause fire or electric shock.

3. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall

it.

4. Remove the power plug from the outlet when then there is a lightning. Neglecting to do so may cause fire or

damage to the product.

5. Keep out of direct sunlight and heat radiation sources. It may cause fire.

6. Install it in a place with good ventilation.

7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the

CMOS image sensor.

8. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,

shall be placed on the apparatus.

9. The Mains plug is used as a disconnect device and shall stay readily operable at any time.

10. Do not expose the camera to radioactivity. Radioactivity exposure may damage the CMOS.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as

vases, shall be placed on the apparatus

6_ overview

overview

CONTENTS

OVERVIEW

3Important Safety Instructions

4Safety Precautions

6Contents

7Product Features

8Part Names and Functions

INSTALLATION

9Before Installation

CONNECTION AND INSTALLATION

11 Connection of DVR and monitor

11 Power connection

12 Use of Communication

12 Connection and Installation

CAMERA OPERATIONS

13 Camera Menus

13 Main menu

APPENDIX

22 Product Specification

24 Product Overview

25 Troubleshooting

English _7

● OVERVIEW

PRODUCT FEATURES

•High resolution

Use the 2 mega-pixel CMOS, and provide high resolution equivalent to 900TVL horizontal resolution.

•High sensitivity

The built-in high sensitive COLOR CMOS can produce a clear image. 0Lux (Auto IR LED On)

•D-WDR (Digit Wide Dynamic Range)

With the OV2710 CMOS sensor, this camera can provide a clear and quality image even under the

circumstance of backlight, by way of and accurate exposure for the dark area and reducing exposure for the

bright area: resulting in a clear, detailed and accurate image.

•Other Features

HLC, BLC, V-Flip/Mirror/Rotate, Sharpness and Privacy Zone.

•Communication

Support Coax (UTC) Communication.

•OSD

There are 8 languages available for the camera OSD.

- English, German, Italian, French, Spanish, Russian, Turkish and Portuguese

Package Contents

Check if the product package includes the following items.

SDC-9443DF User Manual Screw

Anchor 60ft Camera Cable

M `The appearance of the components may differ from the image shown.

`Depending on the model you purchased, there may be difference in the type and number of accessory.

8_ overview

overview

PART NAMES AND FUNCTIONS

Item Description

aPower input terminal: Connect the power as specified. (DC 12V)

bVIDEO OUTPUT jack: Video signals are output through this port. Connect this port to the Video IN port of an

AHD DVR.

cBottom Cover

dTop Cover

eLens: 3.6mm focal length enables you to monitor at a wider field of view.

fIllumination Sensor: Detects incoming light to control the IR LED.

gIR LED: Infrared LED lights are controlled by the illumination sensor.

a b

c d

English _9

●INSTALLATION

installation

BEFORE INSTALLATION

Ensure you read out the following instructions before installing the camera:

•You have to check whether the location (ceiling or wall) can bear five times the weight of your camera.

•Don’t let the cable to be caught in improper place or the electric line cover to be damaged.

Otherwise it may cause a breakdown or fire.

•When installing your camera, don’t allow any person to approach the installation site. If you have any important

issue to be dealt with at the site, please do move the camera away to avoid any damage or injury.

Disassembly

Put a minus screw driver with a 3mm to 6mm width head to any groove part of the camera and rotate 45° to

separate Bottom Cover and Top Cover.

Groove

Rotate 45°

10_ installation

installation

Installation

1. Select installation site. Fix the Bottom cover to the wall or

ceiling by using the 3 screws attached.

2. Connect DC 12V power supply to the camera.

3. Adjust camera position to make sure it points to the area you

would like to monitor.

4. Connect and fix the Top cover and main body to the

Bottom cover.

J `Please mind the installation position.

`Please do not touch the camera lens to avoid any dirt and

dust

Tabla de contenidos

Otros manuales de Cámara de seguridad de Samsung

Samsung

Samsung SmartDome SCC-C6403P Manual de usuario

Samsung

Samsung SND-6084R Manual de usuario

Samsung

Samsung SNF-7010 Manual de usuario

Samsung

Samsung SNB-6004 Manual de usuario

Samsung

Samsung SPD-3300 Manual de usuario

Samsung

Samsung SCP-3371 Manual de usuario

Samsung

Samsung SCC-C7435 Manual de usuario

Samsung

Samsung SIR-4260 Manual de usuario

Samsung

Samsung SMARTCAM SNH-V6414BN Manual de usuario

Samsung

Samsung IPOLIS SNC-570 Manual de usuario

Samsung

Samsung iPolis SNV-1080R Manual de usuario

Samsung

Samsung SNB-5004 Manual de usuario

Samsung

Samsung SHC-373 Manual de usuario

Samsung

Samsung Scc-B2305 Manual de usuario

Samsung

Samsung SNC-B2315 Manual de usuario

Samsung

Samsung iPolis SNV-7080R Manual de usuario

Samsung

Samsung SCC-B2007P Manual de usuario

Samsung

Samsung SNV-5080 Manual de usuario

Samsung

Samsung SCC-C6405(P) Manual de usuario

Samsung

Samsung SCO-2080R Manual de usuario

Samsung

Samsung SNP-6200 Manual de usuario

Samsung

Samsung SCC-B539X Manual de usuario

Samsung

Samsung SND-5080 Manual de usuario

Samsung

Samsung SID-50 Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario

Lumens

Lumens VC-A50PNW Manual de usuario