Samsung SNC-B5399 Manual de usuario

SNC-B5399(P)

imagine the possibilities

Thanks you for purchasing this Samsung product.

To receive a more complete service, please visit

our website

www.samsungsecurity.com

User Manual

Network Camera

RoHS compliant

Our product complies with “The Restriction Of the use of certain Hazardous Substances in electrical

and electronic equipment”, and we do not use the 6 hazardous materials- Cadmium (Cd), Lead

(Pb), Mercury (Hg), Hexavalent Chromium (Cr+6), Poly Brominated Biphenyls (PBBs), Poly Brominated

Diphenyl Ethers (PBDEs)- in our products.

2_ overview

overview

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that dangerous voltage consisting a risk of

electric shock is present within this unit.

This symbol indicates that there are important operating and

maintenance instructions in the literature accompanying this unit.

WARNING

To reduce the risk of ﬁre or electric shock, do not expose this appliance to rain or

moisture.

To prevent injury, this apparatus must be securely attached to the ﬂoor/wall in accordance

with the installation instructions.

If this power supply is used at 24V ac, a suitable plug adapter should be used.

The camera is to be only connected to PoE networks without routing to the outside plant.

WARNING

Be sure to use only the standard adapter that is speciﬁed in the speciﬁcation sheet.

Using any other adapter could cause ﬁre, electrical shock, or damage to the product.

Incorrectly connecting the power supply or replacing battery may cause explosion, ﬁre,

electric shock, or damage to the product.

Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause

abnormal heat generation or ﬁre.

Securely plug the power cord into the power receptacle. Insecure connection may

cause ﬁre.

When installing the camera, fasten it securely and ﬁrmly. The fall of camera may cause

personal injury.

Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or

containers ﬁlled with water on top of the camera. Doing so may cause personal injury

due to ﬁre, electric shock, or falling objects.

English _3

●OVERVIEW

Do not install the unit in humid, dusty, or sooty locations. Doing so may cause ﬁre or

electric shock.

If any unusual smells or smoke come from the unit, stop using the product. In such

case, immediately disconnect the power source and contact the service center.

Continued use in such a condition may cause ﬁre or electric shock.

If this product fails to operate normally, contact the nearest service center. Never

disassemble or modify this product in any way. (SAMSUNG is not liable for problems

caused by unauthorized modiﬁcations or attempted repair.)

When cleaning, do not spray water directly onto parts of the product. Doing so may

cause ﬁre or electric shock

Do not expose the product to the direct airﬂow from an air conditioner.

Otherwise, it may cause moisture condensation inside the Clear Dome due to

temperature difference between internal and external of the dome camera.

If you install this product in a low-temp area such as inside a cold store, you must seal

up the wiring pipe with silicon, so that the external air can not ﬂow inside the housing.

Otherwise, external high, humid air may ﬂow inside the housing, pooling moisture or

vapor inside the product due to a difference between internal and external temperature.

10.

11.

12.

overview

4_ overview

CAUTION

Do not drop objects on the product or apply strong blows to it. Keep away from a

location subject to excessive vibration or magnetic interference.

Do not install in a location subject to high temperature (over 50°C), low temperature

(below -10°C), or high humidity. Doing so may cause ﬁre or electric shock.

If you want to relocate the already installed product, be sure to turn off the power and

then move or reinstall it.

Remove the power plug from the outlet when there is a lighting storm. Neglecting to do

so may cause ﬁre or damage to the product.

Keep out of direct sunlight and heat radiation sources. It may cause ﬁre.

Install it in a place with good ventilation.

Avoid aiming the camera directly towards extremely bright objects such as sun, as this

may damage the CCD image sensor.

Apparatus shall not be exposed to dripping or splashing and no objects ﬁlled with

liquids, such as vases, shall be placed on the apparatus.

The Mains plug is used as a disconnect device and shall stay readily operable at any

time.

When using the camera outdoors, moisture may occur inside the camera due

to temperature difference between indoors and outdoors. For this reason, it is

recommended to install the camera indoors. For outdoor use, use the camera with built-

in fan and heater.

10.

English _5

●OVERVIEW

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions :

1) This device may not cause harmful interference, and

2) This device must accept any interference received including interference that may cause

undesired operation.

Caution

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

IC Compliance Notice

This Class A digital apparatus meets all requirements of the Canadian

Interference.-Causing Equipment Regulations of ICES-003.

overview

6_ overview

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

Do not install near any heat sources such as radiators, heat registers, or other apparatus

(including ampliﬁers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide blade or the third prong is

provided for your safety. If the provided plug does not ﬁt into your outlet, consult an

electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories speciﬁed by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table speciﬁed by

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

Unplug this apparatus during lightning storms or when unused for

long periods of time.

Refer all servicing to qualiﬁed service personnel. Servicing is required when the

apparatus has been damaged in any way, such as powersupply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate normally, or has been dropped.

Apparatus shall not be exposed to dripping or splashing and no objects

filled with liquids, such as vases, shall be placed on the apparatus

10.

11.

12.

13.

14.

English _7

●OVERVIEW

OVERVIEW

6Important Safety Instructions

9Product Features

9Recommended PC Speciﬁcations

10 What’s Included

11 At a Glance

CONTENTS

INSTALLATION &

CONNECTION

14 Disassembling

15 Inserting/Removing an SD

Memory Card

16 Memory Card Information (not

included)

17 Connecting with other Device

21 Installation

21 Optional Accessories for

Installation

CAMERA SETUP

27 How to use the menu key

28 Main Menu

28 Proﬁle

29 Camera Setup

33 Privacy Zone

34 Others

35 System Info

35 Language

NETWORK CONNECTION

AND SETUP

36 Connecting the Camera to an

IP Router with the xDSL/Cable

Modem

37 Connecting the Camera to

an IP Router with Local Area

Networking

38 Connecting the Camera Directly

to a DHCP-Based xDSL/Cable

Modem

39 Connecting the Camera Directly

to Local Area Networking

40 IP Address Setup

41 Static IP Setup

44 Dynamic IP Setup

45 Port Range Forward (Port

Mapping) Setup

46 Connecting to the camera from a

shared local PC

46 Connecting to the camera from a

remote PC via the Internet

overview

8_ overview

WEB VIEWER

47 Connecting to the camera

48 Login

49 Installing ActiveX

50 Using the Live Screen

51 Backup

54 Using the SD Search Viewer

Screen

SETUP SCREEN

55 Accessing the Setup screen

55 Default Setup

60 System Setup

64 Overlay Setup

65 Event Setup

72 Network Setup

APPENDIX

73 Proﬁle

74 Terminology

76 Speciﬁcations

80 Frame Rate (NTSC)

86 Frame Rate (PAL)

92 Troubleshooting

English _9

●OVERVIEW

PRODUCT FEATURES

Support various communication protocols

Supports TCP/IP, UDP, RTP/RTSP, SMTP for email, and FTP protocols as well as various

internet protocols such as ARP, HTTP, HTTPS and DHCP.

Web Browser-based Monitoring

Using the Internet web browser to display the image in a local network environment.

Automatic Local IP Setup

Even a network novice can install it with minimum operations.

Alarm

If an alarm sensor is connected and it detects a motion, a message is sent to the

registered address via FTP/email (SMTP) or stored in the SD memory card, or an alarm

will signal to the alarm out terminal.

Intelligent Video Analysis

If an event rule is deﬁned for the video analysis and it detects a motion in the conﬁgured rule

area, a message is sent to the registered address via FTP/email (SMTP) or stored in the SD

memory card, or an alarm will signal to the alarm out terminal.

PRECAUTIONS – INSTALLATION AND USE

Do not bend or drop the SD memory card.

Do not store or use the SD memory card in a high temperature, high humidity or dusty place.

Be careful not to apply foreign substances on the terminals of SD memory card.

In case of cleaning terminals, wipe gently with a soft cloth.

Before ejecting the SD memory card, release the checkbox <SD Card Record> in

<Alarm image> and press [Apply] button. (page 67)

If SD memory card have reached its lifespan, no data will be saved.

In this case, purchase a new one and replace the SD memory card.

RECOMMENDED PC SPECIFICATIONS

CPU : Pentium4 / 2.4GHz or higher

Operating System : Windows XP(Service

Pack2, Service Pack3) / Windows Vista

Resolution : 1024X768 pixels or higher

RAM : 512MB or higher

Web Browser : Internet Explorer 6.0 or

higher

Video Card : Radeon, Nvidia

Video Memory: 128MB

DirectX 8.1 or higher

Compatible IP Routers

Linksys / D-Link / Netgear

Compatible PoE Switches

Linksys SRW224G4P / D-Link DES-1316 / SMC SMCPWR-INJ3

overview

10_ overview

WHAT’S INCLUDED

Please check if your camera and accessories are all included in the product package.

Image Part name Standard Quantity Usage

Camera SNC-B5399 1

User Manual/

IP INSTALLER

S/W

User

Manual 1

Cable for

test monitor

connection

Used to connect to a monitor for camera

operation test.

For connecting to a surveillance monitor, use

BNC cable.

Plastic

Anchor HUD 5 4

Used to fix the screws, for installation Insert

the anchor into a drilled hole (to reinforce the

strength).

Fixing

Screws

BH, M4 x L8,

SILVER 4Used when installing the case on the ceiling,

with pipe or wall mount. Used to stop up a hole.

Tapping

Screws

TH, M4xL30.

BLACK +O RING 4 Used for ceiling and wall installations

L-wrench TORX T-20 1 Used for assembling / disassembling the dome

cover.

Template ART PAPER 1 Guiding template for the installation

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de seguridad de Samsung

Samsung

Samsung SDC-313A Series Manual de usuario

Samsung

Samsung SCC-B5397 Manual de usuario

Samsung

Samsung SCV-3083 Manual de usuario

Samsung

Samsung SDZ-330 Manual de usuario

Samsung

Samsung SCC-B5397P Manual de usuario

Samsung

Samsung SND-3080P Manual de usuario

Samsung

Samsung SCV-3080 Series Manual de usuario

Samsung

Samsung SCC-B5355(S) Manual de usuario

Samsung

Samsung iPolis SNV-7080R Manual de usuario

Samsung

Samsung SID-50 Series Manual de usuario

Samsung

Samsung SID-53 Manual de usuario

Samsung

Samsung Samsung-T Protocol Manual de usuario

Samsung

Samsung SNV-7080N Manual de usuario

Samsung

Samsung SCV-2082R Manual de usuario

Samsung

Samsung SUD-3080F Manual de usuario

Samsung

Samsung SNV-L6013R Manual de usuario

Samsung

Samsung SSC-C6433 Manual de usuario

Samsung

Samsung SCD-2010 Manual de usuario

Samsung

Samsung SCC-B5353 Manual de usuario

Samsung

Samsung SCB-3001 Manual de usuario

Samsung

Samsung SCC-931TP Manual de usuario

Samsung

Samsung SCC-B1311(P) Manual de usuario

Samsung

Samsung SNB-6003 Manual de usuario

Samsung

Samsung SNV-5080 Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario

Lumens

Lumens VC-A50PNW Manual de usuario