Samsung SCC-C4239P Manual de usuario
User Manual
Power Zoom Camera
SCC-C4237P
SCC-C4337P
SCC-C4239P
SCC-C4339P
imagine the possibilities
Thanks you for purchasing this Samsung product.
To receive a more complete service, please visit
our website
www.samsungsecurity.com
SCC-C4239P-TRK-ENG.indd 1SCC-C4239P-TRK-ENG.indd 1 2009-10-9 9:28:542009-10-9 9:28:54
2_ overview
overview
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that dangerous voltage consisting a risk of
electric shock is present within this unit.
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this unit.
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to rain or
moisture.
To prevent injury, this apparatus must be securely attached to the floor/wall in
accordance with the installation instructions.
WARNING
Be sure to use only the standard adapter that is specified in the specification
sheet.
Using any other adapter could cause fire, electrical shock, or damage to the
product.
Incorrectly connecting the power supply or replacing battery may cause
explosion, fire, electric shock, or damage to the product.
Do not connect multiple cameras to a single adapter. Exceeding the capacity
may cause abnormal heat generation or fire.
Securely plug the power cord into the power receptacle. Insecure connection
may cause fire.
When installing the camera, fasten it securely and firmly. The fall of camera
may cause personal injury.
Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.)
or containers filled with water on top of the camera. Doing so may cause
personal injury due to fire, electric shock, or falling objects.
Do not install the unit in humid, dusty, or sooty locations. Doing so may cause
1.
2.
3.
4.
5.
6.
7.
SCC-C4239P-TRK-ENG.indd 2SCC-C4239P-TRK-ENG.indd 2 2009-10-9 9:31:442009-10-9 9:31:44
English _3
English
fire or electric shock.
If any unusual smells or smoke come from the unit, stop using the product. In
such case, immediately disconnect the power source and contact the service
center. Continued use in such a condition may cause fire or electric shock.
If this product fails to operate normally, contact the nearest service center.
Never disassemble or modify this product in any way. (SAMSUNG is not liable
for problems caused by unauthorized modifications or attempted repair.)
When cleaning, do not spray water directly onto parts of the product. Doing
so may cause fire or electric shock.
CAUTION
Do not drop objects on the product or apply strong blows to it. Keep away
from a location subject to excessive vibration or magnetic interference.
Do not install in a location subject to high temperature (over 50°C), low
temperature (below -10°C), or high humidity. Doing so may cause fire or
electric shock.
If you want to relocate the already installed product, be sure to turn off the
power and then move or reinstall it.
Remove the power plug from the outlet when there is a lighting storm.
Neglecting to do so may cause fire or damage to the product.
Keep out of direct sunlight and heat radiation sources. It may cause fire.
Install it in a place with good ventilation.
Avoid aiming the camera directly towards extremely bright objects such as
sun, as this may damage the CCD image sensor.
Apparatus shall not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, shall be placed on the apparatus.
The Mains plug is used as a disconnect device and shall stay readily operable
at any time.
When using the camera outdoors, moisture may occur inside the camera due
to temperature difference between indoors and outdoors. For this reason, it is
recommended to install the camera indoors. For outdoor use, use the camera
with built-in fan and heater.
8.
9.
10.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
SCC-C4239P-TRK-ENG.indd 3SCC-C4239P-TRK-ENG.indd 3 2009-10-9 9:31:442009-10-9 9:31:44
overview
4_ overview
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as powersupply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
SCC-C4239P-TRK-ENG.indd 4SCC-C4239P-TRK-ENG.indd 4 2009-10-9 9:31:442009-10-9 9:31:44
English _5
English
CONTENTS
OVERVIEW
2
4Important Safety Instructions
5Contents
6Features
7What’s Included
7Part Names and Functions
INSTALLATION &
CONNECTION
11
11 Preparing Installation
11 Connecting the Cables
SETUP
14
14 Main Menu
15 Profile
17 Camera Set
26 Intelligent Video
28 Privacy Zone
29 Preset
30 Other Set
31 Communication
31 System Info
32 Language
APPENDIX
33
33 Shortcut Keys
34 Specifications
SCC-C4239P-TRK-ENG.indd 5SCC-C4239P-TRK-ENG.indd 5 2009-10-9 9:31:442009-10-9 9:31:44
overview
6_ overview
FEATURES
With the state-of-the-art digital signal processing technology, full digital image
processing and special algorithm of 600-line high resolution implemented.
High Sensitivity: It implements images of high sensitivity using the up-to-date Super-
HAD IT CCD(SCC-C4237P/C4337P)/ExView-HAD PS CCD(SCC-C4239P/C4339P).
VPS(Virtual Progressive Scan): This is an advanced technology that reproduces a
sharp progressive image. This is appropriate to high quality recording and file transfer
via the Internet. (SCC-C4239P/C4339P only)
High performance surveillance camera, equipped with x34 zoom lens and digital
zoom IC, enabling monitoring up to 544 times
WDR extends the contrast range as it takes a picture of each of dark and bright areas
before compositing the two, which is useful if you take a picture of windows inside
a building. Namely, it improves the picture quality of the outdoor scenery as well as
indoor.(SCC-C4239P/C4339P only)
Low Illumination: It uses the digital signal technologies such as low illumination
and Day/Night functions that make your camera identify objects even in the worst
environment.
XDR (eXtended Dynamic Range): Actively controls the gamma compensation in the
way it operates the ambient luminance contrast in a certain pixel unit to determine
the optimal visibility.
Digital Power Synchronization: The full digital Line Lock function directly adjusts the
vertical camera synchronization to enhance the operationability and reliability of this
camera.(SCC-C4337P/C4339P only)
DAY/NIGHT:
This function can make the IR Cut filtering function inactive under the
illumination below the normal value.
White Balance to control the brightness to the illumination
Superior Backlight Adjustment:When an object has a bright illumination or sunlight
behind it, this camera automatically improves the shaded object picture quality.
Auto Focus to automatically adjust the focus to the subject movement
Privacy zone to hide a specific area for personal privacy.
SCC-C4239P-TRK-ENG.indd 6SCC-C4239P-TRK-ENG.indd 6 2009-10-9 9:31:442009-10-9 9:31:44
English _7
English
PART NAMES AND FUNCTIONS
SIDE VIEW
Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have
applied ethanol.
M
WHAT’S INCLUDED
Please check if your camera and accessories are all included in the product package.
Camera
Camera Holder
(Mount Adaptor)
2 Screws
User's Manual
Mount Adapter
Fixing Grooves
Camera Lens
SCC-C4239P-TRK-ENG.indd 7SCC-C4239P-TRK-ENG.indd 7 2009-10-9 9:31:452009-10-9 9:31:45
overview
8_ overview
Rear Panel
SCC-C4337P
SCC-C4237P
Input/Output Connector
This connector has input and output ports for RS-485 control signals,
DAY/NIGHT switching, and alarm output signals.
SCC-C4339P
SCC-C4239P
SCC-C4239P/C4339P SCC-C4237P/C4337P
SCC-C4239P-TRK-ENG.indd 8SCC-C4239P-TRK-ENG.indd 8 2009-10-9 9:31:452009-10-9 9:31:45
English _9
English
1. ALARM OUT
Alarm out jack for motion detection. (Open Collector, On Gnd)
2. GND
Grounding jack.
3. TRIGGER IN (SCC-C4239P/C4339P)
Displays the current still image when it receives the Trigger signal. (Normal
Open Type)
4.5.6 FOCUS, COM, ZOOM
This port is used for ZOOM/FOCUS, MENU CONTROL, HOME
RETURN, and ONEAF by using an external controller.
Depending on the input condition, 4 modes, A, B, C, and D are
available. (SPECIAL - CTRL TYPE)
(Operation Voltage Range : +3V~+13V, -3V~-13V)
1) When the voltage is supplied to either ZOOM or FOCUS port
Function
*1
Code
Tele(Up)
Wide(Down)
Near(Left) Far(Right)
ZOOM Port FOCUS Port
A -6V +6V -6V +6V
B -6V +6V +6V -6V
C +6V -6V -6V +6V
D+6V -6V +6V -6V
*1: During MENU OFF, controls ZOOM/FOCUS and during MENU ON,
changes the direction, Up/Down/Left/Right SETUP switch.
2) When the voltage is supplied to both ports
Function
Code
ENTER/AF *2 HOME RETURN *3
ZOOM Port
FOCUS Port
ZOOM Port
FOCUS Port
A -6V -6V +6V +6V
B -6V +6V +6V -6V
C +6V -6V -6V +6V
D+6V +6V -6V -6V
SCC-C4239P-TRK-ENG.indd 9SCC-C4239P-TRK-ENG.indd 9 2009-10-9 9:31:462009-10-9 9:31:46
10_ installation & connection
* 2 : For short voltage supply during MENU OFF, executes ONEAF and for
more than 2 second
* 3 : For more than 2 second long voltage supply, moves to the PRESET
0(HOME) position.
7. 5V OUT
Power supply jack for RS-485 JIG. Use within typical DC +5V 100mA.
8. DAY/NIGHT IN
This is a function to receive the external DAY/NIGHT signal from the
sensor(option) and convert the signal into BW.
9. RS-485 DATA-
Jack for connection to RS-485 DATA- signal line.
10. RS-485 DATA+
Jack for connection to RS-485 DATA+ signal line.
SETUP Switch
This switch is used to set the function or property. When this switch is pressed
for at least 2 seconds, the MAIN MENU appears.
ef
(Left/Right)
: By pressing this switch left or right, you can move left or right
on the menu or change the displayed value.
cd
(Up/Down) :
By pressing this switch up or down, you can move up or down on
the menu.
: When you press this switch in the menu, the selected function is confirmed.
To enter a submenu, press this button.
Video OUT Port
This is connected to the Video Input Port of the monitor and it outputs the
Video signals.
GND
This is a grounding port.
Power Connection Port
This is connected to the Power cable.
Power Display LED
When the power is normally connected, the red LED lights.
SCC-C4239P-TRK-ENG.indd 10SCC-C4239P-TRK-ENG.indd 10 2009-10-9 9:31:462009-10-9 9:31:46
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Cámara de seguridad de Samsung
Samsung
Samsung SNB-1000 Manual de usuario
Samsung
Samsung SCC-931T Manual de usuario
Samsung
Samsung SCD-2020 Manual de usuario
Samsung
Samsung SDC-7310DC Manual de usuario
Samsung
Samsung Wisenet SDC-9443BV Manual de usuario
Samsung
Samsung SCC-641 - 22x Zoom Smart Dome Camera Manual de usuario
Samsung
Samsung SCD-2080EN Manual de usuario
Samsung
Samsung SCC-B5355(S) Manual de usuario
Samsung
Samsung SCV-3082 Manual de usuario
Samsung
Samsung SNP-6320 Manual de usuario
Samsung
Samsung iPolis SNB-5000 Manual de usuario
Samsung
Samsung SCC-C9302P Manual de usuario
Samsung
Samsung SCD-2082 Manual de usuario
Samsung
Samsung SCC-C6323N Manual de usuario
Samsung
Samsung iPolis SNO-5080R Manual de usuario
Samsung
Samsung SND-L6013 Manual de usuario
Samsung
Samsung SCB-3000N Manual de usuario
Samsung
Samsung SCD-2010 Series Manual de usuario
Samsung
Samsung SHC-737 Series Manual de usuario
Samsung
Samsung iPolis SNP-5200H Manual de usuario
