Samsung EO-SG900 Manual de usuario
www.samsung.com
EO-SG900
User manual
Руководство пользователя
Посібник користувача
Пайдаланушы нұсқаулығы
SG900_UM_CIS.indb 3SG900_UM_CIS.indb 3 2014-09-02 오전 11:24:512014-09-02 오전 11:24:51
2
Audio input
jack
Power
connection
jack
Pairing( )
button
Microphone
Copyright © 2014 Samsung Electronics
• Please read this manual before using the Samsung Level (Bluetooth speaker) to ensure safe and proper use.
• Images may differ in appearance from the actual product. Content is subject to change without prior notice.
Device layout
Power button
Play/Stop
button
Volume (-)
button
Volume (+)
button
NFC antenna
Speaker
English
SG900_UM_CIS.indb 2SG900_UM_CIS.indb 2 2014-09-02 오전 11:24:512014-09-02 오전 11:24:51
3
English
Check the product box for the Bluetooth speaker, USB
cable, and user manual. The items supplied with the
speaker and available accessories may vary by region.
Charging the device
This Bluetooth speaker has a built-in battery. Before using the
speaker for the first time or when the battery has been unused
for extended periods, you must charge the battery.
Use only Samsung-approved chargers and cables.
Unapproved chargers or cables can cause the battery
to explode or damage the device.
Charge the speaker by connecting it to the computer or the
USB power adaptor via the USB cable.
• The Power button turns red while the speaker is being
charged. The Power button turns green when charging is
complete.
SG900_UM_CIS.indb 3SG900_UM_CIS.indb 3 2014-09-02 오전 11:24:542014-09-02 오전 11:24:54
4
Charging time (1,600 mAh)
Charging
time
• Approx. 2 hrs (when using 1 A or higher
rated chargers)
• Approx. 5 hrs (when using a USB cable)
• The battery charging time is based on test results
using Samsung-approved chargers.
• The battery charging time may vary depending on
the environment the Bluetooth speaker is used in.
• Refer to the Samsung website for information about
the battery run time.
• To save energy, unplug the charger when not in use.
The charger does not have a power switch, so you
must unplug the charger from the electric socket
when not in use to avoid wasting power. The charger
should remain close to the electric socket and easily
accessible while charging.
• The socket-outlet shall be installed near the
equipment and shall be easily accessible.
SG900_UM_CIS.indb 4SG900_UM_CIS.indb 4 2014-09-02 오전 11:24:542014-09-02 오전 11:24:54
5
English
Turning the Bluetooth speaker on or off
Press and hold the Power button to turn the Bluetooth speaker
on or off. When you turn on the speaker for the first time, it
enters the Bluetooth pairing mode.
• When the speaker is turned on, the Power button flashes
blue three times.
• When the speaker is turned off, the Power button flashes red
three times before turning off.
• To check that the speaker is on, press the Power
button. The Power button flashes three times in
different colours to indicate the remaining battery
power.
• If the speaker freezes, press and hold the Power
button for more than 10 seconds. The speaker will
reset and restart.
Checking the remaining battery power
Disconnect the charger from the Bluetooth speaker and
turn on the speaker. Press the Power button. The Power
button flashes three times in different colours to indicate the
remaining battery power.
Battery power Indicator colour
More than 60 % Green
30 % – 60 % Yellow
Less than 30 % Red
SG900_UM_CIS.indb 5SG900_UM_CIS.indb 5 2014-09-02 오전 11:24:542014-09-02 오전 11:24:54
6
Notices for using Bluetooth
• Ensure that your device and the other Bluetooth device are
within the maximum Bluetooth range (10 m). If there are
obstacles between the devices, the operating distance may
be reduced.
• Ensure that there are no obstacles between your device
and the connected device, including human bodies, walls,
corners, or fences.
• Do not touch the Bluetooth antenna of the connected
device.
• Bluetooth uses the same frequency as some industrial,
scientific, medical, and low voltage equipment and
interference may occur when connecting via Bluetooth near
these types of equipment.
Connecting to other devices
You can connect the Bluetooth speaker to other Bluetooth-
enabled devices, such as smartphones or computers. Also, if
you have devices that support the near field communication
(NFC) feature, you can control the Bluetooth feature to
connect the devices to the speaker.
When connecting for the first time, pair the speaker with the
other Bluetooth-enabled device. Keep the devices close to
each other while pairing or using the speaker.
Instructions for Bluetooth connection or Bluetooth
connection via NFC may vary by device. Refer to the
device’s user manual for additional information.
SG900_UM_CIS.indb 6SG900_UM_CIS.indb 6 2014-09-02 오전 11:24:542014-09-02 오전 11:24:54
7
English
• Some devices, especially those that are not tested or
approved by the Bluetooth SIG, may be incompatible with
your device.
Connecting via Bluetooth
1
Turn on the Bluetooth speaker. Then, press and hold the
Pairing ( ) button for about three seconds.
• The speaker enters the Bluetooth pairing mode and the
Power button flashes red, blue, and green.
2
On the Bluetooth-enabled device, access the Bluetooth
setup mode and search for Bluetooth devices.
3
From the search results, select the Bluetooth speaker.
• When pairing is complete, the speaker appears as
“Connected”in the devices list.
Connecting via Bluetooth using the NFC feature
1
Turn on the Bluetooth speaker.
2
Activate the NFC feature on the other device and bring the
other device’s NFC antenna close to the NFC antenna on
the speaker.
SG900_UM_CIS.indb 7SG900_UM_CIS.indb 7 2014-09-02 오전 11:24:542014-09-02 오전 11:24:54
8
Connecting using an audio cable
You can use an audio cable to connect other media devices,
such as a smartphone, to the Bluetooth speaker.
Audio playback is not available from Bluetooth and audio
cable connections at the same time. If the speaker is playing
audio via Bluetooth, end the Bluetooth connection or stop
playback before connecting a device that uses an audio cable.
• The other device's screen must be unlocked to enable
the devices to connect.
• End the Bluetooth connection between the Bluetooth
speaker and any other device first. The NFC feature is
not available while another device is connected to the
speaker.
Ending the Bluetooth connection
You can end the Bluetooth connection by turning off the
Bluetooth speaker or by disabling the Bluetooth feature on
the connected device. Alternatively, place the devices' NFC
antennas near to each other to end the Bluetooth connection.
SG900_UM_CIS.indb 8SG900_UM_CIS.indb 8 2014-09-02 오전 11:24:542014-09-02 오전 11:24:54
9
English
Using the Bluetooth speaker
When the Bluetooth speaker is connected to a Bluetooth or
NFC-enabled device, you can play audio on the speaker or
use it as a speaker phone. While a device is connected to the
speaker, you can turn on the voice recognition feature of the
connected device by pressing and holding the Play/Stop
button.
The functions that are available when you press and
hold the Play/Stop button may differ depending on the
connected device.
If the Bluetooth speaker is connected to other devices
using an audio cable and Bluetooth simultaneously,
the speaker plays audio from the device connected
via Bluetooth. When playback from the Bluetooth-
connected device stops, the speaker plays audio from
the device connected using an audio cable.
SG900_UM_CIS.indb 9SG900_UM_CIS.indb 9 2014-09-02 오전 11:24:542014-09-02 오전 11:24:54
10
Receiving a call
When there is an incoming call on the connected device, you
can answer the call by pressing the Play/Stop button.
• Press the Play/Stop button to end the current call.
• Press and hold the Play/Stop button to reject a call.
• Press the Volume (+) button or the Volume (-) button to
adjust the volume.
• Press and hold the Play/Stop button to pause or resume
the call.
If another call comes in during a call, the Play/Stop button
flashes.
• Press the Play/Stop button to end the current call and
answer the incoming call.
Playing audio
Play audio from the connected device.
• Press the Volume (+) button or the Volume (-) button to
adjust the volume.
• A notification will sound when the speaker volume reaches
its maximum value. If the sound is not loud enough when
the speaker volume is set to maximum, adjust the volume of
the connected device.
• Press the Play/Stop button to pause or resume playback.
• Press the Play/Stop button twice to skip to the next file.
• Some devices may allow you to control only the
volume.
• The Bluetooth speaker can control only the volume
on devices that have an audio cable connection.
SG900_UM_CIS.indb 10SG900_UM_CIS.indb 10 2014-09-02 오전 11:24:552014-09-02 오전 11:24:55
Otros manuales para EO-SG900
4
Tabla de contenidos
Idiomas:
Otros manuales de Altavoces portátiles de Samsung
Samsung
Samsung DA F60 Manual de usuario
Samsung
Samsung EO-SG900 Manual de usuario
Samsung
Samsung EO-SG900 Manual de usuario
Samsung
Samsung MX-ST50B Manual de usuario
Samsung
Samsung Level Box Manual de usuario
Samsung
Samsung DA F60 Manual de usuario
Samsung
Samsung DA F60 Manual de usuario
Samsung
Samsung WAM7500 Manual de usuario
Samsung
Samsung DA F60 Manual de usuario
