Samsung PL-50D4H Manual de instrucciones
Remote Control Buttons
ŒPOWER button
Turns the PDP on and off.
´ASPECT button
Press to change the screen size.
ˇNumber buttons
¨+100 button
Press to select channels over 100. For example, to select
channel 121, press “+100”, then press “2” and “1.”
ˆMUTE button
Press to mute the PDP sound.
ØVOL (Volume) buttons
Use it to adjust volume.
∏SLEEP button
Press to select a preset time interval for automatic shutoff.
”MENU button
Displays the main on-screen menu.
’ENTER button
Confirms a selection.
˝PIP button
Activates picture in picture.
ÔSTILL button
Press to pause the current screen.
LCD Display
When you press a button, ‘ ‘ appears along with
selected mode (TV, VCR, CATV, DVD or STB) and
the remote's battery charge status.
ÒP.MODE button
Adjust the PDP picture by selecting one of the preset
factory settings (or select your personal, customized
picture settings.)
ÚMODE button
Selects a target device to be controlled by the Samsung
remote control (i.e., VCR, Cable, DVD players or Samsung
STB). If you change modes, the new mode is momentarily
displayed on LCD.
ÆPRE-CH button
Tunes to the previous channel.
ıSOURCE button
Press to display all of the available video sources
(TV, AV1, AV2 S-VIDEO, COMPONENT1, COMPONENT2,
PC, DVI).
˜CH (Channel) buttons
Use it to switch channels.
¯INFO button
Press to display information on the PDP screen.
˘EXIT button
Press to exit the menu.
¿Up/Down Left/Right buttons
Control the cursor in the menu.
8
Remote Control
BN68-00714D-00_002~25 7/20/04 1:50 PM Page 8
¸SRS TSXT button
Selects Trusurround XT mode.
˛MTS button
Press to choose stereo, mono or Separate Audio Pro-
gram (SAP broadcast).
◊AUTO PROG. button
The TV automatically cycles through all of the avail-
able channels and stores them in memory.
±ADD/DEL button
Press to add or delete channels in the TV’s memory.
≠DNIe button
Activates DNIe (Digital Natural Image engine).
–CAPTION button
Controls the caption decoder.
—SET button
Used during set up of this Samsung remote control,
so that it will work compatibly with other devices
(VCR, Cable Box, DVD)
÷PIP control buttons
SIZE : Press to make the PIP window Large,
Small or Double.
SWAP : Exchanges the video signal that is
currently displayed on the main screen
with the signal in the PIP window.
CH
,
:Displays the available channels in
sequence. (These buttons change channels
in the PIP window only).
®VCR, DVD control buttons
Controls VCR tape or DVD disc functions: Stop,
Rewind, Play/Pause, Fast Forward.
∑RESET button
If your remote control is not functioning properly, take
out the batteries and press the reset button for about
2~3 seconds. Re-insert the batteries and try using the
remote control again.
Installing the Batteries in Your Remote Control
1Slide the back cover
to open the battery
compartment of the
remote control.
3Slide the cover back into
place.
2Install two AAA size batter-
ies. Make sure to match the
“+” and “-” ends of the bat-
teries with the diagram
inside the compartment.
Remote Control Operation Range.
You can use your remote control within a distance of 23 feet and an angle of 30 degrees
from the left and right sides of the PDP’s remote control receiver.
BN68-00714D-00_002~25 7/20/04 1:50 PM Page 9
Connecting a VCR
Connecting a VCR to the Video or S-Video/Audio jack
S-Video Cable
Audio Cable
Video Cable
Power Plug
Connect the Video/Audio cables between the VIDEO or S-VIDEO / L - AUDIO - R jacks on the PDP
and VIDEO or S-VIDEO / L - AUDIO - R output jacks on the VCR. (Note: For better video, you can use
an S-Video cable.)
Videotape Playback:
1. Turn on your PDP.
2. Press the SOURCE button to select “Video(AV1 or AV2)” or “S-Video”.
3. Turn on your VCR, insert a videotape and press the play button.
How to Connect
PDP
VCR
Note
•Please be sure to match he color coded input terminals and cable jacks.
BN68-00714D-00_002~25 7/20/04 1:50 PM Page 21
Connecting a Camcorder
S-VIDEO
Audio Cable
S-Video Cable
Video Cable
Power Plug
Connect a Video/Audio cable between the VIDEO or S-VIDEO / L - AUDIO - R jacks on the PDP
and the VIDEO or S-VIDEO / AUDIO output jacks on the camcorder.
Viewing Tapes
1. Turn on your PDP.
2. Press the SOURCE button to select “Video(AV1 or AV2)” or “S-Video”.
3. Turn on your camcorder and set it to Video Mode. (For details, refer to your camcorder
Owner’s instructions.)
4. Set the IN/OUT switch on your camcorder to OUT.
5. Insert the tape into the camcorder and press the Play button.
How to Connect
Viewing camcorder tapes
PDP
Camcorder
Note
•Please be sure to match he color coded input terminals and cable jacks.
BN68-00714D-00_002~25 7/20/04 1:50 PM Page 22
Connecting a DVD Player (480i, 480p)
This PDP displays the optimum picture in 720p mode.
Playing DVD
Audio Cable
Video Cable
Power Plug
Connect a Video Cable between the Y, Pb, Pr(COMPONENT1, 2) input jacks on the PDP
and Y/PB/PRoutput jacks on the DVD player.
Connect a Audio Cable between the AUDIO L/R(COMPONENT1, 2) input jacks on the PDP
and the AUDIO output jacks on the DVD player.
To Play DVD:
1. Turn on your PDP.
2. Press the SOURCE button to select “COMPONENT1” or “COMPONENT2”.
3. Turn on your DVD player, insert a DVD disc and press the Play button.
• For an explanation of Component video, see your DVD owner’s instructions.
How to Connect
1
2
PDP
DVD Player
Note
•Please be sure to match he color coded input terminals and cable jacks.
BN68-00714D-00_002~25 7/20/04 1:50 PM Page 23
Connecting a DTV Receiver
(480p, 720p, 1080i)
This PDP displays the optimum picture in 720p mode.
Watching DTV
Video Cable
Audio Cable
DVI Cable
or
Power Plug
Connect the cable or antenna to the antenna input jack on the DTV.
Connect a Video cable between the Y, Pb, Pr(COMPONENT 1, 2) or DVI jack on the PDP
and the Y, PB, PR(COMPONENT) or DVI output jacks on the DTV receiver.
Connect an Audio cable between the COMPONENT 1, 2 (L/R AUDIO) or DVI (L/R AUDIO)
jacks on the PDP and the AUDIO output jacks on the DTV receiver.
To Watch DTV:
1. Turn on your PDP.
2. Press the SOURCE button to select “COMPONENT1”, “COMPONENT2” or “DVI”.
3. Turn on your DTV receiver.
• For an explanation of Component video, see your DTV receiver owner’s instructions.
How to Connect
1
2
3
Use a DVI-D connection cable. (sold separately)
PDP
DTV Receiver
Note
•Please be sure to match he color coded input terminals and cable jacks.
BN68-00714D-00_002~25 7/20/04 1:50 PM Page 24
Otros manuales para PL-50D4H
2
Tabla de contenidos
Otros manuales de Televisor de plasma de Samsung
Samsung
Samsung PN50A550 Manual de usuario
Samsung
Samsung PN42C450B1D Guía del usuario
Samsung
Samsung PE43H4500AW Manual de usuario
Samsung
Samsung PN51F8500AF Manual de usuario
Samsung
Samsung PN63B590 Manual de usuario
Samsung
Samsung SYNCMASTER PS50B430P Manual de usuario
Samsung
Samsung 4550 Manual de usuario
Samsung
Samsung PS51D8000FU Manual de usuario
Samsung
Samsung PN50B850 - 50" Plasma TV Manual de usuario
Samsung
Samsung HPS5073X/XAA Manual de usuario
Samsung
Samsung Series 4+ Manual de usuario
Samsung
Samsung PS-42D5S Manual de usuario
Samsung
Samsung PS51F5505 Manual de usuario
Samsung
Samsung PS50P4HX/XEC Manual de usuario
Samsung
Samsung PS50C7000YK Manual de usuario
Samsung
Samsung HP-P3761 Manual de usuario
Samsung
Samsung PN51F5350AFXZA Manual de usuario
Samsung
Samsung ps50c680g5k Manual de usuario
Samsung
Samsung PS42A426 Manual de usuario
Samsung
Samsung PN51E550D1F Manual de usuario
