Samsung HP-P3761 Manual de usuario

Remote Control Buttons

ŒPOWER button

Turns the PDP on and off.

´ASPECT button

Changes the screen size.

ˇNumber buttons

¨+100 button

Press to select channels over 100. For example, to select

channel 121, press “+100”, then press “2” and “1.”

ˆMUTE button

Mutes the PDP sound.

ØVOL (Volume) buttons

Adjust volume.

∏SLEEP button

Selects a preset time interval for automatic shutoff.

”MENU button

Displays the main on-screen menu.

’ENTER button

Confirms a selection.

˝PIP button

Activates picture in picture.

ÔSTILL button

Pauses the current screen.

LCD Display

When you press any button, ‘ ‘ appears along with

selected mode (TV, VCR, CATV, DVD, or STB) and

the remote's battery charge status.

ÒP.MODE button

Adjust the PDP picture by selecting one of the preset

factory settings (or select your personal, customized

picture settings).

ÚMODE button

Selects a target device to be controlled by the Samsung

remote control (i.e., VCR, Cable, DVD players, or Samsung

STB). If you change modes, the new mode is momentarily

displayed on LCD.

ÆPRE-CH button

Tunes to the previous channel.

ıSOURCE button

Press to display all of the available video sources

(TV, AV1, AV2, S-VIDEO, COMPONENT1, COMPONENT2,

and DVI).

˜CH (Channel) buttons

Switch channels.

¯INFO button

Press to display information on the PDP screen.

˘EXIT button

Exits the menu.

¿Up/Down Left/Right buttons

Controls the cursor in the menu.

Remote Control

¸SRS TSXT button

Selects TruSurround XT mode.

˛MTS button

Chooses stereo, mono or Separate Audio Program

(SAP broadcast).

◊AUTO PROG. button

The TV automatically cycles through all of the

available channels and stores them in memory.

±ADD/DEL button

Adds or deletes channels in the TV’s memory.

≠DNIe button

Activates DNIe (Digital Natural Image engine).

–CAPTION button

Controls the caption decoder.

—SET button

Used during set up of this Samsung remote control,

so that it will work compatibly with other devices

(VCR, Cable Box and DVD).

÷PIP control buttons

SIZE : Changes the size of the PIP window.

SWAP : Exchanges the video signal that is

currently displayed on the main screen

with the signal in the PIP window.

:Displays the available channels in

sequence. (These buttons change

channels in the PIP window only).

®VCR, DVD control buttons

Controls VCR tape or DVD disc functions: Stop,

Rewind, Play/Pause, and Fast Forward.

∑RESET button

If your remote control is not functioning properly, take

out the batteries and press the reset button for about

2~3 seconds. Re-insert the batteries and try using the

remote control again.

Installing the Batteries in Your Remote Control

1Slide the back cover

to open the battery

compartment of the

remote control.

3Slide the cover back into

place.

2Install two AAA size batter-

ies. Make sure to match the

“+” and “-” ends of the bat-

teries with the diagram

inside the compartment.

Remote Control Operation Range.

You can use your remote control within a distance of 23 feet and an angle of 30 degrees

from the left and right sides of the PDP’s remote control receiver.

Antennas with 75-ohm Round Leads

If your antenna looks like this: it has 75-ohm round leads.

1Plug the antenna lead into the VHF/UHF terminal

on the PDP.

Use the antenna cable included in the product

package.

Connecting Cable TV

You can connect different cable systems to your PDP, including cable without a cable box,

and cable with a cable box that descrambles some or all channels.

Cable without a Cable Box

1 Plug the incoming cable into the VHF/UHF terminal on

the PDP.

Use the antenna cable included in the product

package.

Cable with a Cable Box that Descrambles All Channels

1 Find the cable connected to the ANTENNA OUT

terminal on your cable box. This terminal might be

labeled "ANT OUT", "VHF OUT" or simply "OUT".

2Connect the cable to the VHF/UHF terminal on the

PDP.

Use the antenna cable included in the product

package.

Cable with a Cable Box that Descrambles Some (But Not All) Channels

To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial

cables (which you can buy from your Samsung dealer or any electronics store).

1Find and disconnect the cable that is

connected to the ANTENNA IN terminal of

your cable box.

This terminal might be labeled "ANT IN",

"VHF IN" or simply, "IN". Connect this

cable to a two-way splitter.

2Connect a coaxial cable between an

OUTPUT terminal of the splitter and the

IN terminal of the cable box.

3Connect a coaxial cable between the

ANTENNA OUT terminal of the cable box

and the B-IN terminal of the A/B switch.

4Connect a coaxial cable between the

ANTENNA OUT terminal of the cable box

and the B-IN terminal of the A/B switch.

5Connect the last coaxial cable between the

OUT terminal of the RF (A/B) switch and

the VHF/UHF terminal on the PDP.

After you've made this connection, set the A/B switch to the "A" position for normal viewing.

Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch

to "B", you will need to tune your Set-Top Box to the cable box's output channel, which is usually

channel 3 or 4.)

Connecting a VCR

Connecting a VCR to the Video or S-Video/Audio jack

S-Video cable

Audio cable

Video cable

Power cord

Connect the video/audio cables between the VIDEO or S-VIDEO / L - AUDIO - R jacks on the

PDP and VIDEO or S-VIDEO / L - AUDIO - R output jacks on the VCR. (Note: For better video,

use an S-Video cable.)

Note

•Please be sure to match the color coded input terminals and cable jacks.

Videotape Playback:

1. Turn on your PDP.

2. Press the SOURCE button to select “Video(AV1 or AV2)” or “S-Video”.

3. Turn on your VCR, insert a videotape and press the play button.

How to Connect

PDP VCR

Connecting a Camcorder

Connect a Video/Audio cable between the VIDEO or S-VIDEO / L - AUDIO - R jacks on the

PDP and the VIDEO or S-VIDEO /AUDIO output jacks on the camcorder. (Note: For better

video, use an S-VIDEO cable.)

Note

•Please be sure to match the color-coded input terminals and cable jacks.

Viewing Tapes

1. Turn on your PDP.

2. Press the SOURCE button to select “Video(AV1 or AV2)” or “S-VIDEO”.

3. Turn on your camcorder and set it to Video Mode. (For details, refer to your camcorder

Owner’s instructions.)

4. Set the IN/OUT switch on your camcorder to OUT.

5. Insert the tape into the camcorder and press the Play button.

How to Connect

Viewing camcorder tapes

S-Video cable

Audio cable

Video cable

Power cord

PDP Camcorder

Connecting a DVD Player (480i, 480p)

This PDP displays the optimum picture in 720p mode.

Playing DVD

Connect a video cable between the Y, Pb, Pr(COMPONENT1, 2) input jacks on the PDP

and Y/PB/PRoutput jacks on the DVD player.

Connect an audio cable between the AUDIO L/R(COMPONENT1, 2) input jacks on the PDP

and the AUDIO output jacks on the DVD player.

Note

•Please be sure to match the color-coded input terminals and cable jacks.

To Play DVD:

1. Turn on your PDP.

2. Press the SOURCE button to select “COMPONENT1” or “COMPONENT2”.

3. Turn on your DVD player, insert a DVD disc and press the Play button.

• For an explanation of Component video, see your DVD owner’s instructions.

How to Connect

Component cable

Audio cable

Power cord

PDP DVD Player

Watching DTV

Connect the cable or antenna to the antenna input jack on the DTV.

Connect a video cable between the Y, Pb, Pr(COMPONENT 1, 2) or DVI jack on the PDP

and the Y, PB, PR(COMPONENT) or DVI output jacks on the DTV receiver.

Connect an audio cable between the COMPONENT 1, 2 (L/R AUDIO) or DVI (L/R AUDIO)

jacks on the PDP and the AUDIO OUTPUT jacks on the DTV receiver.

Notes

•Please be sure to match the color-coded input terminals and cable jacks.

•Connecting a PC using the DVI connection is not supported.

To Watch DTV:

1. Turn on your PDP.

2. Press the SOURCE button to select “COMPONENT1”, “COMPONENT2” or “DVI”.

3. Turn on your DTV receiver.

• For an explanation of Component video, see your DTV receiver owner’s instructions.

How to Connect

Use a DVI-D video cable. (sold separately)

Audio cable

Component cable

DVI cable

Power cord

PDP

DTV Receiver

Otros manuales para HP-P3761

Tabla de contenidos

Otros manuales de Televisor de plasma de Samsung

Samsung

Samsung Series 4+ 430 Manual de usuario

Samsung

Samsung PN50C540G3F Manual de usuario

Samsung

Samsung Series 5+ 550 Manual de usuario

Samsung

Samsung PDP Display Manual de usuario

Samsung

Samsung PS50C687 Manual de usuario

Samsung

Samsung PN43F4500 Manual de usuario

Samsung

Samsung PL51E530A3F Manual de usuario

Samsung

Samsung SP-P4251 Manual de usuario

Samsung

Samsung PS60E530A3W Manual de usuario

Samsung

Samsung PN63A650T1F Manual de usuario

Samsung

Samsung PS-42S4S1R Manual de usuario

Samsung

Samsung PN58A650T Manual de usuario

Samsung

Samsung 550 Series Manual de usuario

Samsung

Samsung PN50B550T2F Manual de usuario

Samsung

Samsung ps59d550 Manual de usuario

Samsung

Samsung HPP5071X/XAA Manual de usuario

Samsung

Samsung PS50C530C1W Manual de usuario

Samsung

Samsung PS42A411C2 Manual de usuario

Samsung

Samsung R4232 - SP - 42" Plasma TV Guía de configuración

Samsung

Samsung PN50A550S1FXZA Manual de usuario

Samsung

Samsung PN50B650S1FXZA Guía del usuario

Samsung

Samsung PN58B860Y2FXZA Manual de usuario

Samsung

Samsung PL42A450P1 Manual de usuario

Samsung

Samsung PS50B551T3W Manual de usuario

Manuales populares de Televisor de plasma de otras marcas

Hitachi

Hitachi 50PD9800TA Manual de usuario

Pioneer

Pioneer PDP-LX508G Manual de usuario

LG 60PM9700 Manual de usuario

LG 50PX4D Manual de usuario

Panasonic

Panasonic Viera TH-37PA20 Manual de usuario

Panasonic

Panasonic TH-103PF12E Manual de usuario

Panasonic

Panasonic VIERA TH-42PZ80Q Manual de usuario

LG 60PA5500 Manual de usuario

Sony

Sony WEGA KE-P42M1 Manual de usuario

VESTEL

VESTEL PL2000 Manual de usuario

VisionQuest

VisionQuest PVQ-32VGB Manual de usuario

Maxent

Maxent MX-5020HPM Manual de usuario

XOCECO

XOCECO PH-42T8 Manual de usuario

Maxent

Maxent MX-42VM7 Manual de usuario

Sampo

Sampo PME-42S6 Manual de usuario

Hitachi

Hitachi 32PD7800 Manual de usuario

LG 50PK550 Manual de usuario

Haier

Haier P42A1-AK Manual de usuario