Samsung SyncMaster 2494HM Manual de usuario
ii
LCD MONITOR
quick start guide
2494HS 2494HM
Introduction
Package Contents
Note
Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
Contact a local dealer to buy optional items.
Unpacking
Type 1
Monitor and HAS stand
Type 2
Monitor and HAS-USB stand
Type 3
Monitor and Simple stand
Type 4
Monitor and Simple-USB stand
Note
MagicRotation program can not be provided as Simple Stand does not support Pivot function.
List of Parts
Quick Setup Guide Warranty Card
(Not available in all loca-
tions)
User's Guide
D-Sub Cable Power Cord
Option
USB Cable Cable holding ring
Sold separately
DVI Cable Stereo Cable HDMI Cable
Headphones
Introduction
Note
• USB cable is only provided when the stand type is HAS-USB or SIMPLE-USB.
• Cable holding ring is only provided when the stand type is SIMPLE or SIMPLE-USB.
Your Monitor
Initial Settings
Select the language using the up or down key.
The displayed content will disappear after 40 seconds.
Turn the power button off and on. It will be displayed again.
It can be displayed up to three (3) times. Make sure to adjust the resolution of your PC before
reaching the maximum count.
Note
The resolution displayed on the screen is the optimal resolution for this product.
Adjust your PC resolution so that it is the same as the optimal resolution for this product.
Front
Note
Touch them lightly with your fingers to use them.
Introduction
MENU button [MENU/ ]
Opens the on-screen menu and exits from the menu. Also use to exit the
OSD menu or return to the previous menu.
Customized Key
You can customize key assignment for the Custom button according to
your preferences.
Note
You can configure the Customized key for a required function via Setup >
Customized Key.
Volume button
When OSD is not on the screen, push the button to adjust volume.
>> Click here to see an animation clip
Adjust buttons [ ]
Adjust items in the menu.
Enter button [ ] / SOURCE button
Activates a highlighted menu item.
Push the ' /SOURCE', then selects the video signal while the OSD is off.
(When the /SOURCE button is pressed to change the input mode, a
message appears in the upper left of the screen displaying the current
mode -- analog or digital input signal.).
Note
If you select the digital mode, you must connect your monitor to the graphic
card's DVI port using the DVI cable.
>> Click here to see an animation clip
AUTO button
Use this button for auto adjustment.
>> Click here to see an animation clip
Power button [ ]
Use this button for turning the product on and off.
Power Indicator
This light is lit when operating normally, and blinks once when your ad-
justments are saved.
Note
See PowerSaver described in the manual for further information regarding
power saving functions. For energy conservation, turn your monitor OFF
when it is not needed or when leaving it unattended for long periods.
Speaker
You can hear sound by connecting the soundcard of your PC to the mon-
itor.
Introduction
Rear
Note
The configuration at the back of the monitor may vary from product to product.
POWER S/W / POWER
POWER S/W
Switch the product on and off.
POWER
Connect the power cord for your monitor to
the
POWER
port on the back of the product.
HDMI IN / DVI IN(HDCP) /
RGB IN
HDMI IN
Connect the
HDMI IN
terminal at the back of
your product to the HDMI terminal of your
digital output device using a HDMI cable.
DVI IN(HDCP)
Connect the DVI cable to the
DVI IN
(HDCP)
port on the back of your product.
RGB IN
Connect the
RGB IN
terminal at the back of
your product to your computer.
AUDIO IN / AUDIO OUT
Introduction
AUDIO IN
Connect the audio cable for your product to
the audio port on the back of your computer.
AUDIO OUT
Headphone output terminal
USB connection ter-
minal (Option)
UP
(USB upstream port)
Connect the
UP
port of the product and
the USB port of the computer with the USB
cable.
DOWN
(USB downstream port)
Connect the
DOWN
port of the USB
product and a USB device with the USB ca-
ble.
Note
To use
DOWN
(Downstream Port), you
have to connect the
UP
(Upstream Ca-
ble ) to the PC.
Make sure to use the USB cable supplied
with this product to connect the product's
UP
port and your computer's USB port.
Kensington Lock
The Kensington lock is a device used to
physically fix the system when using it in a
public place.
(The locking device has to be purchased
separately.)
Note
For using a locking device, contact where
you purchase it.
Stand Stopper (Only ap-
plied to HAS or HAS-USB
type stand.)
Introduction
Remove the fixing pin on the stand to lift the
product up and down.
Note
See Connecting Cables for further information regarding cable connections.
Package Contents
Note
Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
Contact a local dealer to buy optional items.
Unpacking
Type 1
Monitor and HAS stand
Type 2
Monitor and HAS-USB stand
Type 3
Introduction
Monitor and Simple stand
Type 4
Monitor and Simple-USB stand
Note
MagicRotation program can not be provided as Simple Stand does not support Pivot function.
List of Parts
Quick Setup Guide Warranty Card
(Not available in all loca-
tions)
User's Guide
D-Sub Cable Power Cord
Option
USB Cable Cable holding ring Cleaning Cloth
Introduction
Sold separately
DVI Cable Stereo Cable HDMI Cable
Headphones
Note
• USB cable is only provided when the stand type is HAS-USB or SIMPLE-USB.
• Cable holding ring is only provided when the stand type is SIMPLE or SIMPLE-USB.
• Cleaning Cloth is only provided for highly polished black products as a product feature.
Your Monitor
Initial Settings
Select the language using the up or down key.
The displayed content will disappear after 40 seconds.
Turn the power button off and on. It will be displayed again.
It can be displayed up to three (3) times. Make sure to adjust the resolution of your PC before
reaching the maximum count.
Note
The resolution displayed on the screen is the optimal resolution for this product.
Adjust your PC resolution so that it is the same as the optimal resolution for this product.
Introduction
Otros manuales para SyncMaster 2494HM
5
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Monitor de Samsung
Samsung
Samsung AQ17HS Manual de usuario
Samsung
Samsung GH15DS Manual de usuario
Samsung
Samsung 940UX - SyncMaster - 19" LCD Monitor Manual de usuario
Samsung
Samsung S24C770 Manual de usuario
Samsung
Samsung S22F350FH Manual de usuario
Samsung
Samsung MO17W Series Manual de usuario
Samsung
Samsung UD55D Manual de usuario
Samsung
Samsung Odyssey S49CG954SU Manual de usuario
Samsung
Samsung SyncMaster 550b Manual de usuario
Samsung
Samsung SyncMaster 551v Manual de usuario
Samsung
Samsung 400UXn - SyncMaster - 40" LCD Flat Panel... Manual de usuario
Samsung
Samsung SyncMaster 330TFT Manual de usuario
Samsung
Samsung SyncMaster 400TXn Manual de usuario
Samsung
Samsung 971P - SyncMaster - 19" LCD Monitor Manual de usuario
Samsung
Samsung S27D850T Manual de usuario
Samsung
Samsung PD22EO Manual de usuario
Samsung
Samsung SAMTRON 77DFX Manual de usuario
Samsung
Samsung SyncMaster 721N Manual de usuario
Samsung
Samsung S24C570HL Manual de usuario
Samsung
Samsung SyncMaster 400EX Manual de usuario
