Samsung XPR Series Manual de usuario
Outdoor LED Installation Manual
- XPR Series -
Standard Cabinet
LH080XPRZAS/PZ
Rev.0.9
Contents
2
Installation Precautions
1. Product Information
. Specification, Standard Cabinet, Package, Screen Configuration, Fan installation
2. Installation
. Overview, Unboxing, Accessary Assembly, Fan Assembly, Handling Cabinet, Mounting Cabinet,
Y8, Signal B’d Assembly, Cable Connections, Power Connections,
Waterproof/ Bezel Accessary Assembly
3. Accessory Kit
. Tools & Materials
4. Control Room Setting
. System configuration, System Matrix
Installation Precautions –Important Guidelines to Follow
3
•Precautions prior to Installation
- Ensure that all personnel at the site of installation wear personal protection equipment, such as safety helmets, safety
glasses, safety gloves and other appropriate safety equipment.
- Ensure that at least two persons work together to move or transport the product so as to ensure safety.
- Ensure that the power cord is not close to any heat sources. The cord sheath may melt and cause a fire or electric shock.
- Do not install the product in a confined space with poor ventilation. The internal temperature may increase and cause a
fire.
- Make sure you remove the power cord before transporting the product. Transporting the product with the cord connected
may cause a fire or electric shock.
- Make sure you ground the display screens before connecting the power source. Contacting a display that is not
grounded may result in death or severe injuries.
Installation Precautions –Important Guidelines to Follow
4
◇Installation precautions for prevention of damage to LED
Precautions Images
[Be careful to prevent external impact or dropping]
①
After removing the Cover-
Corner from the product prior to installation, exercise caution to
ensure that the LED surface is not exposed to physical impact and the product is not
dropped onto the floor.
②
Do not place the product on a vibrating object. Make sure the LED surface does not face
down onto the floor.
③
Exercise caution to ensure that the corners of the LED module are not damaged due to
contact with external factors.
④
Make sure the number of loaded rows does not exceed two.
①
②
③
④
[Be careful to prevent LED damage due to electric shock]
▶
Do not touch the LED surface with bare hands without wearing anti-static gloves.
[Be careful to prevent LED damage due to chemicals]
▶
Ensure that the product does not contact water, liquids containing alcohol, solvent or
surfactant, or chemicals such as wax, benzene, thinner, mosquitocide, air freshener,
lubricator or cleaning agent.
◇XPR-S Series
. CREE LED
1. Product Information: Specification
5
SPECIFICATIONS XPR-S
Pitch P6 P8 P10 P16TH
Diode CREE CLY6C CREE C4SMM
Max Brightness Nits 8000
Black Uniformity L10 +/- 0.15 (TBD)
Video Processing 24 Bit
Color Capacity 16 Bit
Color Temp 4,500 –9,000K
Refresh Rate (spec 4,800Hz) 7,680Hz 7,680Hz 7,680Hz 7,680Hz
Horizontal Viewing Angle 160
Vertical Viewing Angle
(Top/Bottom) +20 / -65
Contrast Ratio 8,000:1 ↑
Typ. Weight (Kg/sqm) 40 kg ↓
IP Rating (Front/Rear) IP67 / IP66
EMC Class A
Cabinet Material Aluminum
Service Front & Rear
◇XPR-E Series
. NS/XD LED
1. Product Information: Specification
6
SPECIFICATIONS XPR-E
Pitch P6 P8 P10 P16TH P20TH
Diode NS FM2727 XDL-305J
Max Brightness Nits 7000 7500
Black Uniformity L10 +/- 0.15 (TBD)
Video Processing 24 Bit
Color Capacity 16 Bit
Color Temp 4,500 –9,000K
Refresh Rate (spec 4,800Hz) 7,680Hz 7,680Hz 7,680Hz 7,680Hz 7,680Hz
Horizontal Viewing Angle 160
Vertical Viewing Angle
(Top/Bottom) +20 / -65
Contrast Ratio 8,000:1 ↑
Typ. Weight (Kg/sqm) 40 kg ↓
IP Rating (Front/Rear) IP67 / IP65
EMC Class A
Cabinet Material Aluminum
Service Front & Rear
◇Standard Cabinet
- Outside
1. Product Information: Standard Cabinet
7
Front Rear
◇Standard Cabinet
- Product Size
1. Product Information: Standard Cabinet
8
Item Spec
Cabinet Size (W x H) 1000 mm x 1000 mm
Module Size (A x B) 250 mm x 250 mm
Set depth (D) 264.3 mm
Weight [kg] 38 kg
Y8 PDS
SMPS
SMPS
SMPS
SMPS
◇Standard Cabinet (+ Y8)
- Product Inside
1. Product Information: Standard Cabinet
9
①
②
②
②
②
③
④ ⑤
⑥ ⑥
⑦
①
PDS
②
SMPS
③
AC Filter
④
Power In
⑤
Power Out
⑥
External Fan position
⑦
Y8 (1
Y8 for 1 block)
1. Product Information: Package
10
1265
1225
387
◇Outdoor Cabinet Box
- Read the label to make sure it is the right cabinet.
Read the information in the attached label to check
the Model Code and Project No.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Señalización digital de Samsung
Samsung
Samsung OH24B Manual de usuario
Samsung
Samsung PM32F Manual de usuario
Samsung
Samsung IL020F Manual de usuario
Samsung
Samsung ED32C Manual de usuario
Samsung
Samsung XHB Series Manual de usuario
Samsung
Samsung IWJ Series Manual de usuario
Samsung
Samsung QM85D Manual de usuario
Samsung
Samsung QB Series Manual de usuario
Samsung
Samsung SBB-IS08E Manual de usuario
Samsung
Samsung IER-F Series Manual de usuario
Samsung
Samsung MD40C Manual de usuario
Samsung
Samsung QBR Series Manual de usuario
Samsung
Samsung SBB-SSF Manual de usuario
Samsung
Samsung Smart QBR Series Manual de usuario
Samsung
Samsung XA060J Manual de usuario
Samsung
Samsung IWA Manual de usuario
Samsung
Samsung QBN Series Manual de usuario
Samsung
Samsung LH75OMREBGB Manual de usuario
Samsung
Samsung SM460DXN Manual de usuario
Samsung
Samsung QBR-N Series Manual de usuario
