Samsung QBR Series Manual de usuario

Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than Samsung Electronics are

property of their respective owners.

QBR (QB13R QB13R-T)

The colour and the appearance may differ depending on the product, and the content in the

manual is subject to change without prior notice to improve the performance.

Recommended hours of use per day of this product is under16 hours.

If the product is used for longer than 16 hours a day, the warranty may be void.

An administration fee may be charged in the following situations:

(a) An engineer is called out at your request, but it is found that the product has no defect (i.e.,

where the user manual has not been read).

(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e.,

where the user manual has not been read).

You will be informed of the administration fee amount before a technician visits.

Smart Signage User Manual (By Model)

This manual provides information about your Smart Signage including supported types and product specications per model.

Table of contents

Preparations

Checking the Components 3

Using the STAND-BAR 4

Parts 5

Anti-theft Lock 6

Ports 7

QB13R 7

QB13R-T 8

Control menu 9

Administrator menu (Supported model:

QB13R-T) 10

Safety Precautions 11

Electricity and Safety 11

Before Installing the Product (Installation

Guide) 12

Tilting Angle and Rotation 12

Ventilation 12

Installing the Wall Mount 13

Wall Mount Kit Specifications (VESA) 13

Using a touchscreen monitor

(Supported model: QB13R-T)

Touchscreen monitor 14

Read below before using the product 14

Requirements 15

Connecting the touchscreen monitor 17

Connecting to a PC 17

Connecting to a laptop or tablet PC 17

Configuring the touchscreen monitor

settings 18

Calibration 18

Controlling the screen 20

Touchscreen gestures 20

Notes 21

Specifications

General 22

Preset Timing Modes 23

Appendix

Licence 24

Preparations

Chapter 01

"Contact the vendor where you

purchased the product if any

components are missing.

"The appearance of the components

may differ from the images shown.

"The RS232C adapter can be used to

connect to another monitor using the

D-SUB (9-pin) type RS232C cable.

Checking the Components

Quick Setup Guide Warranty card

(Not available in some locations) Regulatory guide Power cord

AC/DC adapter Batteries (AAA x 2)

(Not available in some locations) Remote Control RS232C adapter

STAND-BAR x 2 TOUCH OUT cable

(Supported model: QB13R-T)

Using the STAND-BAR

Place the product with the face down on top of the protective cloth or cushion.

Insert the bar into a slot on the product and then turn to fasten.

Parts

Remote sensor

Power button

Speaker

"The colour and shape of parts may differ from what is shown. Specifications are subject to change without

notice to improve quality.

Parts Description

Remote sensor

Press a button on the remote control pointing at the sensor on the front of the product

to perform the corresponding function.

"Using other display devices in the same space as the remote control of this product

can cause the other display devices to be inadvertently controlled.

Power button

Turns the product on or off.

Use the remote control within 2.5 m to 4 m from the sensor on the product at an angle of 30° from the left and

right.

"Store used batteries out of reach of children and recycle.

"Do not use a new and used battery together. Replace both batteries at the same time.

"Remove batteries when the remote control is not to be used for an extended period of time.

Anti-theft Lock

"An anti-theft lock allows you to use the product securely even in public places.

"The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.

"The following images are for reference only. Real-life situations may differ from what is shown in the images.

To lock an anti-theft locking device:

Fix the cable of your anti-theft locking device to a heavy object such as a desk.

Put one end of the cable through the loop on the other end.

Insert the locking device into the anti-theft lock slot at the back of the product.

Lock the locking device.

– An anti-theft locking device can be purchased separately.

– Refer to the user guide provided with your anti-theft locking device for details.

– Anti-theft locking devices can be purchased at electronics retailers or online.

Ports

QB13R

"The colour and shape of parts may differ from what is shown.

Specifications are subject to change without notice to improve quality.

Port Description

AUDIO OUT

Outputs sound to an audio device via an audio cable.

RS232C IN

Connects to MDC using an RS232C adapter.

USB ¨(1.0A)

Connect to a USB memory device.

"The USB ports on the product accept a maximum constant current of 1.0A.

If the maximum value is exceeded, USB ports may not work.

RJ45

Connects to MDC and the Internet using a LAN cable. (10/100 Mbps)

"Use Cat7(*STP Type) cable for the connection.

*Shielded Twist Pair.

HDMI IN

Connects to a source device using a HDMI cable or HDMI-DVI cable.

DC 14V

Connects to the AC/DC adapter.

QB13R-T

"The colour and shape of parts may differ from what is shown.

Specifications are subject to change without notice to improve quality.

Port Description

AUDIO OUT

Outputs sound to an audio device via an audio cable.

RS232C IN

Connects to MDC using an RS232C adapter.

USB ¨(1.0A)

Connect to a USB memory device.

"The USB ports on the product accept a maximum constant current of 1.0A.

If the maximum value is exceeded, USB ports may not work.

RJ45

Connects to MDC and the Internet using a LAN cable. (10/100 Mbps)

"Use Cat7(*STP Type) cable for the connection.

*Shielded Twist Pair.

HDMI IN

Connects to a source device using a HDMI cable or HDMI-DVI cable.

TOUCH OUT

Connects to a PC using a TOUCH OUT cable to enable touch functions.

DC 14V

Connects to the AC/DC adapter.

Control menu

"The power button («) is located on the back of the product.

"If you press the power button on the product when the product is

turned on, the control menu will be displayed.

Power off Source

Press: Move Press & Hold: Select

Items Description

Power off

Power off the product.

•With the control menu screen displayed, briefly press the power button to

move the cursor to Power off , and then press and hold the power button to

turn off the product.

Source

Select the connected input source.

•With the control menu screen displayed, briefly press the power button to

move the cursor to Source , and then press and hold the power button to

display the input source screen.

•With the input source screen displayed, press and hold the power button to

switch to the desired input source.

"The power button can only be used for Power off and Source.

"To exit from the control menu screen, wait for 3 seconds or more without pressing the power button.

Administrator menu (Supported

model: QB13R-T)

"Touching and holding on the screen when the product is turned on

displays the administrator menu.

"If the touchscreen control is not available, use the remote control to

go to System → Touch Control → Touch Control and select On from the

OSD menu. And go to Device to Control and select Samsung SMART

Signage or Auto.

"If the administrator menu is not displayed, use the remote control to

go to System → Touch Control → Admin Menu Lock and select Off from

the OSD menu.

Buttons Description

Volume Adjust the Volume.

•Select Volume from the administrator menu.

Home Enter Home mode.

•Select Home from the administrator menu.

Display the OSD menu.

To change settings, select a menu item.

•Select Menu from the administrator menu.

Source

Select the connected input source.

Select an input source from the displayed list of input sources.

•Select Source from the administrator menu.

Power Power off the product.

•Select Power from the administrator menu.

Otros manuales para QBR Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Señalización digital de Samsung

Samsung

Samsung UD46E-A Manual de usuario

Samsung

Samsung XPR-E Manual de usuario

Samsung

Samsung IWA Manual de usuario

Samsung

Samsung QB50C Manual de usuario

Samsung

Samsung OH46B Manual de usuario

Samsung

Samsung XA060J Manual de usuario

Samsung

Samsung UE46D Manual de usuario

Samsung

Samsung IWJ Series Manual de usuario

Samsung

Samsung XPR-E Series Manual de usuario

Samsung

Samsung KMC-W Manual de usuario

Samsung

Samsung LH75OMREBGB Manual de usuario

Samsung

Samsung OH85N Manual de usuario

Samsung

Samsung LH55QMRTBGCXZA Manual de usuario

Samsung

Samsung ED55C Manual de usuario

Samsung

Samsung QMR Series Manual de usuario

Samsung

Samsung VH55B-E Manual de usuario

Samsung

Samsung ME32C Manual de usuario

Samsung

Samsung QHR Series Manual de usuario

Samsung

Samsung Smart QBR Series Manual de usuario

Samsung

Samsung XHB Series Manual de usuario

Samsung

Samsung XA067T Manual de usuario

Samsung

Samsung XA010J Manual de usuario

Samsung

Samsung OMN Manual de usuario

Samsung

Samsung QB43R Manual de usuario

Manuales populares de Señalización digital de otras marcas

LG 72WS70MS-B Manual de usuario

SMART-AVI

SMART-AVI SIGNAGEPRO Manual de usuario

LG 65SM5D Manual de usuario

LG 55EW5TK-A.AUS Manual de usuario

KeyWest Technology

KeyWest Technology BREEZE Manual de usuario

XtendLan

XtendLan XL-DSP-183C Manual de usuario

LG 47VL10 Manual de usuario

LG WP400 Guía de inicio rápido

Dynascan

Dynascan DS861LR4 Manual de usuario

Classic Exhibits

Classic Exhibits SEGUE DESIGNS MOD-1363 Manual de usuario

LG 22XE1J Manual de usuario

protech

protech KT-7290 Manual de usuario

WebDT

WebDT 515A Instrucciones de montaje

LG 84TR3B Manual de usuario

LG 55EJ5D Guía de inicio rápido

EVERI

EVERI Enrollment Kiosk Manual de usuario

LG 75XS4G Manual de usuario

LG 49UH7J Manual de usuario