Samsung SCX-RD100 Manual de usuario

English 1

ENG

SCX-RD100

COAXIAL REMOTE

CONTROLLER

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsungsecurity.com

ENG FRE

GER SPA

ITA JAP RUS CZE TUR

2– COAXIAL REMOTE CONTROLLER

Safety information

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR

BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

This symbol indicates that dangerous voltage consisting a risk of

electric shock is present within this unit.

This exclamation point symbol is intended to alert the user to

the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

WARNING

To reduce the risk of ﬁre or electric shock, do not expose this appliance to rain

or moisture.

WARNING

Be sure to use only the standard adapter that is speciﬁed in the speciﬁcation sheet.

Using any other adapter could cause ﬁre, electrical shock, or damage to the product.

Incorrectly connecting the power supply or replacing battery may cause

explosion, ﬁre, electric shock, or damage to the product.

Do not connect multiple controllers to a single adapter. Exceeding the capacity

may cause abnormal heat generation or ﬁre.

Securely plug the power cord into the power receptacle. Insecure connection

may cause ﬁre.

When installing the controller, fasten it securely and ﬁrmly. The fall of controller

may cause personal injury.

Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or

containers ﬁlled with water on top of the controller. Doing so may cause personal

injury due to ﬁre, electric shock, or falling objects.

Do not install the unit in humid, dusty, or sooty locations. Doing so may cause ﬁre

or electric shock.

If any unusual smells or smoke come from the unit, stop using the product. In

such case, immediately disconnect the power source and contact the service

center. Continued use in such a condition may cause ﬁre or electric shock.

•

English 3

ENG

Safety information

If this product fails to operate normally, contact the nearest service center. Never

disassemble or modify this product in any way. (SAMSUNG is not liable for

problems caused by unauthorized modiﬁcations or attempted repair.)

When cleaning, do not spray water directly onto parts of the product. Doing so

may cause ﬁre or electric shock.

CAUTION

Do not drop objects on the product or apply strong blows to it. Keep away from a

location subject to excessive vibration or magnetic interference.

Do not install in a location subject to high temperature (over 50°C), low

temperature (below -10°C), or high humidity. Doing so may cause ﬁre or electric

shock.

If you want to relocate the already installed product, be sure to turn off the power

and then move or reinstall it.

Remove the power plug from the outlet when there is a lighting storm. Neglecting

to do so may cause ﬁre or damage to the product.

Keep out of direct sunlight and heat radiation sources. It may cause ﬁre.

Install it in a place with good ventilation.

Avoid aiming the controller directly towards extremely bright objects such as sun.

Apparatus shall not be exposed to dripping or splashing and no objects ﬁlled with

liquids, such as vases, shall be placed on the apparatus.

The Mains plug is used as a disconnect device and shall stay readily operable at

any time.

10.

4– COAXIAL REMOTE CONTROLLER

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, or other

apparatus (including ampliﬁers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong is provided for your safety. If the provided plug does not ﬁt into your outlet,

consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories speciﬁed by the

manufacturer.

Use only with cart, stand, tripod, bracket, or table

speciﬁed by the manufacturer, or sold with the apparatus.

Unplug this apparatus when a card is used. Use caution

when moving the cart/ apparatus combination to avoid

injury from tip-over.

Refer all servicing to qualiﬁed service personnel. Servicing is required when the

apparatus has been damaged in any way, such as powersupply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

10.

11.

12.

13.

14.

Important Safety Instructions

English 5

ENG

Contents

Introduction

Introduction 6

Part names and functions 7

Installation

Checking Installation Environment 11

Installation precautions 11

Connection & Control

To Control the camera coaxial communications 12

To control the camera using RS-485 device

via coaxial communications 13

To control the camera using RS-232 device

via coaxial communications 14

To control the camera using RS-485 signal output 15

To control the camera using RS-485 signal

output via RS-232 communications 16

Switch Setting Table 17

Speciﬁcations

Speciﬁcations 20

Dimensions 21

6– COAXIAL REMOTE CONTROLLER

Introduction

INTRODUCTION

This product is a remote controller for Samsung’s CCTV cameras of New-generation

DSP, via coaxial cable not requiring additional control wirings.

Features

Long-distance remote control

Through RS-485 communication, remote control is possible up to 1.2

kilometers.

Easy Control

Easy and simple 5-way keys for controlling the camera.

System’s Expandability

It is possible to implement an integrated system by using the system controller

(SSC-5000 or similar) through RS-485 communication.

Portability

Its small size and light weight maximizes the portability, as well as its power

source adopting standard battery for outdoor use.

List of controllable models

You can control Samsung’s cameras supporting coaxial communications.

Samsung’s RS-485 supporting cameras can be controlled through RS-485

communication. (For supported 3rd-party protocols, refer to page 17.)

What’s Included

❖

•

❖

•

❖

❶

❷

❸

❹

❖

English 7

ENG

Introduction

PART NAMES AND FUNCTIONS

STATUS LED

- Displays the status of the current operation.

POWER LED

- When the controller turns on, it will be turn light.

POWER Switch

- If you slide it to ON, the controller turns on.

CABLE COMPENSATION Switch

- For long distance coaxial communications, you can use this switch for amplifying

the control signal.

Cable SPEC Compensation

5C-HFBT

250M or less 200M ~ 500M

❶

❷

❸

❹

Front Panel❖

POWER

ADDRESS

(X)100 (X)10

TERMINATION PROTOCOL

2345678

(X)1

OFF ON

STATUS

CABLE

COMPENSATION

REMOTE CONTROLLER SCX-RD100

8– COAXIAL REMOTE CONTROLLER

Introduction

RS-485 TERMINATION & PROTOCOL Setting Switch

- You can select to set the RS-485 termination.

- Turn this switch ON, if RS-485 termination is required.

TERMINATION

PROTOCOL

2345678

OCOL

- For multi-protocol settings, you can set the protocol and baud rate, and

selection of COAXIAL/RS-485 or RS-232.

TERMINATION

PROTOCOL

2345678

TERMINATI

- Use pin 1,2,3,4 of the Protocol setting switch to select a protocol.

- Use pin 5,6 of the Protocol setting switch to select a baud rate.

- Use pin 7 of the Protocol setting switch to select COAXIAL/RS-485 output.

- Use pin 8 of the Protocol setting switch to select RS-232 input.

Address Switch

For RS-232 / RS-485 communications, you can use this switch to set the address.

ADDRESS

(X)100 (X)10 (X)1

- Set the address by using three switches shown above.

- From the left, the number is hundreds, tens and ones place, respectively.

The effective range of valid address is between 0 and 255 (1~255 for multi-

protocol).

Menu Navigation Key

Use this to navigate through the menus.

❺

❻

❼

❖

If you specify the address as other than between 0 and 255, it will be set to 0.



NOTE

English 9

ENG

Introduction

Rear Panel❖

PART NAMES AND FUNCTIONS

- AA BATTERY

You can use 4 AA-sized batteries for the power.

- The average operation time is 20 hours based on the alkaline battery.

(If the battery is discharged, it can cause a distortion of the video signal, or

electric interference.)

Remove the battery if you do not use the controller for a longer period. Otherwise, it

may cause damage to the controller from a leak of the battery solution.

Take caution not to change the specified polarity.

Do not use a new battery with an old one.

For storing used batteries, keep out of reach of children. Wasted batteries are to be

collected separately.



NOTE

10 – COAXIAL REMOTE CONTROLLER

Introduction

Top❖

USB Port

-This terminal is used for updating the product’s ﬁrmware.

RS-232 Port (9-pin D SUB)

- Used to control remotely using RS-232 communication.

RS-485 Port (4-pin)

- Used to control remotely using RS-485 communication.

VIDEO IN/OUT Connector (BNC)

- VIDEO IN receives coaxial communication from cameras, and VIDEO OUT

outputs the video signal.

DC12V Power Connector (2-PIN)

- Used for connecting DC12V power source.

❶

❷

❸

❹

❺

OUT IN

TX RX

ADDRESS

(X)100 (X)10 (X)1

POWER

OFF ON

CABLE

COMPENSATION

REMOTE CONTROLLER SCX-RD100

POWER STATUS

TERMINATION PROTOCOL

23456781

RS-232C

VIDEO DC 12VRS-485

nop qr

Tabla de contenidos

Otros manuales de Accesorios para cámaras de Samsung

Samsung

Samsung SHG-220 Manual de usuario

Samsung

Samsung SNP-3750 Manual de usuario

Samsung

Samsung STH-160PI Manual de usuario

Samsung

Samsung SHD-3000F Manual de usuario

Samsung

Samsung SCU-9080 Manual de usuario

Samsung

Samsung SBO-100B1 Manual de usuario

Samsung

Samsung Techwin SHD-3000F1 Manual de usuario

Samsung

Samsung 136S Manual de usuario

Samsung

Samsung SCU-VAC Manual de usuario

Samsung

Samsung SHB-4300H Manual de usuario

Samsung

Samsung SHD-3000F Manual de usuario

Samsung

Samsung STB-30PF Manual de usuario

Samsung

Samsung 16mm F2.4 Manual de usuario

Samsung

Samsung SHP-3701F Manual de usuario

Samsung

Samsung SHG-223 Manual de usuario

Samsung

Samsung SCX-300LM Manual de usuario

Samsung

Samsung STH-560PE Manual de usuario

Samsung

Samsung SHG-222 Manual de usuario

Samsung

Samsung SCX-300KM Manual de usuario

Samsung

Samsung SCU-2370 Manual de usuario

Samsung

Samsung SCC-101 Manual de usuario

Samsung

Samsung SCU-2370 Manual de usuario

Samsung

Samsung SHP-3700H Manual de usuario

Samsung

Samsung SPH-20W/P Manual de usuario

Manuales populares de Accesorios para cámaras de otras marcas

Viltrox

Viltrox EF-NEX Instrucciones de instalación

Calumet

Calumet 7100 Series CK7114 Manual de usuario

Ropox

Ropox 4Single Series Manual de usuario

Cambo

Cambo Wide DS Digital Series Instrucciones de funcionamiento

Ryobi

Ryobi BPL-1820 Manual de operación

Aegis

Aegis ABL-36020P Manual de usuario

Pentax

Pentax Data Back Fc Manual de usuario

Fantasea

Fantasea EyeGrabber F Series Manual de usuario

Honeywell

Honeywell HDZ20HD Manual de usuario

EGO

EGO BA1400T Manual de usuario

Sima

Sima SRW-62 Manual de usuario

Shape

Shape A7SSMKIT Manual de usuario

Slide Kamera

Slide Kamera HST-2 Manual de usuario

Power works

Power works 2902613 Manual de usuario

SES

SES SE-2047-2 Manual de usuario

Olympus

Olympus PT-EP05L Manual de usuario

Starlite

Starlite OctoDome nxt Manual de usuario

Custom Brackets

Custom Brackets Digital PRO-M Manual de usuario