Samsung HF4000 Manual de usuario
BluetoothCAR
HANDSFREE
HF4000
Draft
2010-08-13
Please read this manual before operating your device, and keep it for furthure reference.
Images used in this user manual may differ in appearance from the actual product.
Please read all Safety precautions before using your device to ensure safe and proper use.
Safety precautions
※
When using your device while driving, follow local regulations in the region you are
in.
※
Never disassemble or modify your device for any reason. Doing this may cause the
device to malfunction or become combustible. Bring the device to an authorized
service center to repair it.
※
Keep your device and all accessories out of the reach of small children or animals.
Small parts may cause choking or serious injury if swallowed.
※
Avoid exposing your device to very cold or very hot temperatures (below 0° C or
above 45° C). Extreme temperatures can cause the deformation of the device and
reduce the charging capacity and life of your device.
※
Do not allow your device to get wet — liquids can cause serious damage. Do not
handle your device with wet hands. Water damage to your device can void your
manufacturer’s warranty.
※
Avoid using your device’s light close to the eyes of children or animals.
Getting started
Charging the hands-free car kit
This hands-free car kit has a rechargeable internal battery which is non-
removable. Ensure that you fully charge the battery before using the hands-free
car kit for the first time.
1 Plug the small end of the cigar lighter adapter into the adapter jack.
2 Plug the large end of the cigar lighter adapter into the accessory outlet in your
vehicle.
3 When the hands-free car kit is fully charged, the charging icon is no longer
moving. Unplug the cigar lighter adapter from hands-free car kit.
You can also use the travel adapter to charge the hands-free car kit.
Use only a Samsung-approved charger. Unauthorized chargers may
cause an explosion or damage to the hands-free car kit.
The battery will gradually wear out while charging or discharging
because it is a consumable part.
When the battery charge gets low
The hands-free car kit beeps and the battery icon is blinking. Recharge the battery.
If the hands-free car kit powers off during a call, the call will be automatically
transferred to the phone.
Mount the hands-free car kit in your vehicle
Slide the hands-free car kit onto a sun visor in your vehicle .
Using your hands-free car kit
This section explains how to turn the hands-free car kit on, pair and connect to the
phone, and use various functions.
Activated functions and features may differ depending on the types of your
phone.
Some devices, especially those that are not tested or approved by
Bluetooth SIG, may be incompatible with your hands-free car kit.
Turning the hands-free car kit on or off
To turn the hands-free car kit on, slide the Power switch left. The hands-free car
kit beeps and the display is on.
To turn the hands-free car kit off, slide the Power switch right. The hands-free car
kit beeps and the display is off.
Turning the driving mode on or off
In Pairing mode, press and hold the voice button for 4 seconds.
You can also use the voice command "Driving Mode Setting."
When the driving mode is on, you will hear "Driving mode is on."
Using the voice command
You can control your hands-free car kit using your voice. Your hands-free car kit
can recognize only English commands.
1 Press the Voice button to activate the voice command
To use the voice command feature, ensure that the voice prompt is on.
2 Wait for the hands-free car kit ask you to “Say a command.”
If you don’t say any command for 5 seconds, you will hear, “Cancelled.” To
reactivate the voice command, press the Voice button.
3 Say one of the following commands loudly and clearly.
Command Action
“Driving Mode Setting” Check the status of Driving mode, and ask to
change on or off. Say “Yes” or “No” to
change the mode.
“Pair Active” Enter the Active pairing mode
“Pair Normal” Enter the Normal pairing mode
“Connection Status” Find out if the hands-free car kit is connected
to the device or not.
“Redial” Redial the last number you called on the
currently connected primary phone.
“Redial Two” Redial the last number you called on the
currently connected secondary phone.
“Call 1”, “Call2” or “Call 3” Call the corresponding speed dial number
stored on your phone.
'"Missed call back"
Call the latest missed call stored on your phone.
"Incoming call back"
Call the latest incoming call stored on your phone.
"Outgoing call back"
Call the latest outgoing call stored on your phone.
“Multi Point Setting” Check the status of Multi-Point mode, and
turn it on or off. Say “Yes” or “No” to change
the mode.
“Check Battery” Check the battery level on the hands-free car
kit and the currently connected phone.
“Phone Voice Command” Access your phone’s voice dialing feature, if
it has one.
“Phone Voice Command
Two” Access the secondary connected phone’s
voice dialing feature, if it has one.
“Command List ” List of Voice Commands.
“Voice Prompt”
Check the status of Voice prompt.
Say “Yes“ or
“No“ to change the mode.
Your hands-free car kit may not recognize voice commands if you speak
softly or unclearly.
Your hands-free car kit may inadvertently recognize voice commands
from background sounds that are louder than your voice.
Using the voice prompt
The voice prompt will inform you about the current status of the hands-free car kit
and usage instructions. The voice prompt is available in English only.
Turning the voice prompt on or off
To turn the voice prompt on
In Pairing mode, press and hold the Volume up button for 4 seconds. You will
hear “Voice prompt is on” from your hands-free car kit.
To turn the voice prompt off
In Pairing mode, press and hold the Volume down button for 4 seconds. You will
hear “Voice prompt is on” from your hands-free car kit.
The following voice prompts are available according to the status:
Status Voice prompt
When you enter Pairing mode “Ready to pair. Search for the
hands-free car kit from the
Bluetooth menu. Enter 0000 if
prompted for a PIN”
When you enter Active pairing mode “Active pairing mode”
When Active pairing failes “Active pairing failed”
When you connect the hands-free car kit to
a phone (when Multi-point mode is off) “Device is connected”
When you connect the hands-free car kit to “Primary device is connected” or
a phone (when Multi-point mode is on) “Secondary device is connected”
When you connect the hands-free car kit to
a music device “Music device is connected”
When a call comes in “Call from [phone number]. Say
answer or ignore”
Pairing and connecting the hands-free car kit
Pairing will create a unique and encrypted wireless link between two Bluetooth-
enabled devices, such as a Bluetooth phone and your Bluetooth hands-free car kit.
To use the hands-free car kit with other Bluetooth devices, the devices must be
paired. When trying to pair the two devices, keep the hands-free car kit and the
phone reasonably close together. After pairing, you can connect the two devices.
Pairing and connecting the hands-free car kit with a phone
1 Enter Pairing mode.
- With the hands-free turned on, press and hold the Talk button for 4
seconds. You will hear “Ready to pair.”
- You can also use the Voice command “Pair Normal.”
- If you turn on the hands-free car kit for the first time, it proceeds into
Pairing mode immediately.
2 Activate the Bluetooth feature on your phone and search for the hands-free car
kit (see your phone’s user manual).
3 Select the hands-free car kit from the list of devices found by your phone.
4 Enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the hands-free car
kit to your phone.
Your hands-free car kit supports the Simple Pairing feature which allows
the hands-free car kit to be paired with a phone without requesting a
PIN. This feature is available for phones that are compliant with
Bluetooth version 2.1 or higher.
Turning the Multi-point mode on or off
To turn the Multi-point mode on
In Pairing mode, press and hold the Volume up button. You will hear “Multi-point
mode is on”. You can also use the Voice command “Multi Point Setting.”
To turn the Multi-point mode off
In Pairing mode, press and hold the Volume down button. You will hear “Multi-
point mode is off.” You can also use the Voice command “Multi Point Setting.”
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Samsung
Samsung
Samsung HF1000 Manual de usuario
Samsung
Samsung HF1000 Manual de usuario
Samsung
Samsung HF1000 Manual de usuario
Samsung
Samsung EP-H5300 Manual de usuario
Samsung
Samsung SCH-I300 Manual de usuario
Samsung
Samsung WEP850 Manual de usuario
Samsung
Samsung EB-HN910I Manual de usuario
Samsung
Samsung HKT600 Manual de usuario
Samsung
Samsung WEP750 Manual de usuario
Samsung
Samsung HF1000 Manual de usuario
