Salamander Designs FPS Series Manual de usuario
Salamander Mobile Interactive Display Stands 501-692 [7.18] page 1 of 21
fps1xl/FH/gg user manuAl
FPS SERIES mobile interactive
display stands
CAPACITY
Supports most displays up to 400 lb (181 kg)
VESA Mounting Compliant
Horizontal - 400, 600, 800, 1000, 1200mm
Vertical - 400, 500, 600mm
FPS1XL/FH/GG
E479586
ADA
COMPLIANT
Salamander Mobile Interactive Display Stands 501-692 [7.18] page 2 of 21
PARTS
ID QTY PART NUMBER DESCRIPTION
(1) PHK-740 (bag) Display Mounting Fastener Set - Metric
A (4) 301-695 M8 x 16mm Pan Phillips Screw
B (4) 301-710 M6 x 20mm Pan Phillips Screw
C (11) 301-015 5/16-18 x 1/2” Button Head Screw - for Display Bracket
D(17) 301-010 5/16-18 x 3/4” Button Head Screw - for Leg Attachment
E (4) 400-010 Cable ties
F (3) 400-125 Velcro cinch strap
G (1) 400-060 3/16” Hex wrench - long arm
H (1) 400-080 5/32” Hex wrench
I (1) 400-070 1/8” Hex wrench
J (2) 305-062/GT Display Interface Brackets
K (4) 1/4-20 x 3/8” Rear Panel Screws
L (2) Thumb Nut Rack Gear Attachment
M (2) Thumb Screw Rack Gear Attachment
N (4) Keyhole Shoulder Washer
O (3) 400-120 Cinch Strap Gear & Cable Hold
A
PHILLIPS HEX
B
E
J
G
H
I
F
C D
M
L
Salamander Mobile Interactive Display Stands 501-692 [7.18] page 3 of 21
warnings [English]
WARNING! Failure to comply with these instructions
may result in accident involving serious personal injury.
Failing to follow these instructions can result in the
product being damaged or being destroyed or voiding
of the warranty.
WARNING! For use with video monitors weighing
400 lbs (181 Kg) or less. Use with heavier televisions
may result in instability causing tip over resulting
in death or serious injury.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – Children must be under surveillance to ensure that they do not operate, touch,
climb, or play with the product.
CAUTION! When relocating the device, and use handle to move and position the device.
Maintenance
• Wipecleanwithadampcloth.
Repairs
• Referallservicingtoqualiedservicepersonnel.Servicingisrequiredwhenthedevice
has been damaged in any way, such as the device has been exposed
to rain or moisture, does not operate normally, or has been dropped.
Accessories and Spare Parts
Please contact your nearest Salamander Designs dealer or www.salamanderdesigns.com/commercial
SAVE THESE INSTRUCTIONS
Salamander Mobile Interactive Display Stands 501-692 [7.18] page 4 of 21
UNBOX & INSTALL LEGS
Empty box and arrange the four L shaped package inserts in the bottom
of the box as shown below.
Replace the box top. Remove Upper and Lower Rear Covers and position the
Header Wall face up on the end of the closed box where the L shaped package
inserts are reinforcing the box. Position the Header Wall as shown to allow
assembly of Legs.
ASSEMBLY
Emptybox and arrange the four L shaped package inserts in the bottom of the box as shown.
Replace the box top. Remove Upper and Lower Rear Covers and position the Header Wall face up
on the end of the closed box where the L shaped package inserts are reinforcing the box. Position
the Header Wall as shown to allow assembly of Legs.
Replace the box top. Remove Upper and Lower Rear Covers and position the Header Wall face up
on the end of the closed box where the L shaped package inserts are reinforcing the box. Position
the Header Wall as shown to allow assembly of Legs.
Salamander Mobile Interactive Display Stands 501-692 [7.18] page 5 of 21
INSTALL LEGS
Thereare6“D”screwsperleg.Thefth&sixthscrewisinstalledonthetop
of the leg as shown above.
Install legs by having one person hold leg and other person fasten with “D”
screws. Please note that the leg has a long side and short side - the long side with
caster brake faces the front of the unit.
After legs have been securely fastened to stand, use two-people lift to stand
to upright position.
Using four 5/16 - 18 x .75 Button Head Screws, attach the first Leg to the Stand in the orientation shown,
with the longer Leg containing the caster brake facing forward. Repeat these steps to attach the second Leg.
Once both Legs are securely fastened to the Stand, use two people to lift the Stand to the upright position.
D x 12
G
display installation
Attach Brackets to Display
Check depth of screw threads in display before inserting screws. Inserting a screw that
is longer than the hole could result in damage to display. Depthcanbeconrmedby
insertinghexwrenchintoholeandmarkingitslengththenconrmingthislengthis
sucientbycomparingittothescrewyouareusing.
Install interface mounting brackets (J) onto display as shown using supplied phillips
screws(AorB)orscrewsspeciedbythedisplaymanufacturer.Hand tighten rst
to conrm thread and depth match.Note:Axdisplaybrackets“Ears-Out”asshown
Touch Presenter Motorized Mobile Stand
A
B
Ears out
Salamander Mobile Interactive Display Stands 501-692 [7.18] page 7 of 21
Atach Display to Stand
Using four “D” screws, attach four Keyhole Shoulder Washers as shown.
Using six “C” Button head Screws, attach the Display Beam to the Display Bracket.
Using four 5/16 - 18 x 3/4 Button Head Screws, attach
four Keyhole Shoulder Washers as shown.
Using six 5/6 - 18 x 3/4 Button head Screws, attach the Display Beam to the Display Bracket.
Salamander Mobile Interactive Display Stands 501-692 [7.18] page 8 of 21
Two people are needed to install the display on the stand. Insert the
four Keyhole Shoulder Washers through the four Keyhole slots and
then use four “C” Button Head Screws to permanently attach the Display
Beam and Display unit to the stand. Replace Upper & Lower Rear Cover.
Two people are needed to install the display on the stand. Insert the four Keyhole Shoulder Washers through the four Keyhole slots and
then use four 5/6 - 18 x 1/2 Button Head Screws to permanently attach the Display Beam and Display unit to the stand. Replace Upper Rear Cover.
Salamander Mobile Interactive Display Stands 501-692 [7.18] page 9 of 21
Attach Gear
Using the straps “O” and or thumb screw / nut “M & L” attach your gear.
Salamander Mobile Interactive Display Stands 501-692 [7.18] page 10 of 21
Save These Instructions
LIMITED LIFETIME WARRANTY
Salamander Designs Ltd. Limited Lifetime Warranty on Furniture and Seating products are guaranteed to be free from defects in design, material
and workmanship, given normal use and proper care in a normal single shift Commercial environment, with the exceptions noted below. Salamander
will repair or replace, at its discretion without charge to the original purchaser, any product or part thereof which fails as the result of such defects
during the warranty period. The repair or replacement will not exceed the original purchase price. Salamander assumes no responsibility for repairs
toproductsthatresultfromusermodications,attachmentstoaproduct,misuse,abuse,alteration,ornegligentuse.Exceptasstatedabove,
Salamandermakesnoexpressedorimpliedwarrantiesastoanyproduct,and,inparticular,makesnowarrantyofmerchantabilityortnessfor
anyparticularpurpose.Salamandershallnotbeliableforconsequentialorincidentaldamagesorcommerciallossarisingfromanyproductdefect.
Furniture Warranty Limitations
Frame - Lifetime
Wood Components - 7 Years
Casters - 7 Years
For a complete Warranty, please visit www.salamanderdesigns.com/commercial FPS1XL/FH/GG
E479586
Attach Rear Panels
InstalltheUpperandLowerRearPanelsbyrstplacingthealignmentpins
on the stand through the alignment holes on the Upper and Lower Rear Panels
and then attach the Panels using four “K” screws.
Install the Upper and Lower Rear Panels by first placing the alignment pins on the stand
through the alignment holes on the Upper and Lower Rear Panels and then attach the
Panels using four "K" screws.
Otros manuales para FPS Series
5
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Rack y soporte de Salamander Designs
Salamander Designs
Salamander Designs X-LARGE SINGLE DISPLAY MOUNT Manual de usuario
Salamander Designs
Salamander Designs EZ Series Manual de usuario
Salamander Designs
Salamander Designs FPS1FH Manual de usuario
Salamander Designs
Salamander Designs FPS1XL/FH/CSP75/GG Manual de usuario
Salamander Designs
Salamander Designs FPS1XL Manual de usuario
Salamander Designs
Salamander Designs FPS1/FH/GG Manual de usuario
Salamander Designs
Salamander Designs FPS1/EL/CSP75/GG Manual de usuario
Salamander Designs
Salamander Designs FPS Series Manual de usuario
Salamander Designs
Salamander Designs ZOOM DESK 102 SINGLE Manual de usuario
Salamander Designs
Salamander Designs FPS2W/EL/CS/75/GG Manual de usuario
Salamander Designs
Salamander Designs FPS Series Manual de usuario
Salamander Designs
Salamander Designs FPS1/EL/CS/55/GG Manual de usuario
Salamander Designs
Salamander Designs Strut 170 Manual de usuario
Salamander Designs
Salamander Designs Strut Wall 170 Manual de usuario
Salamander Designs
Salamander Designs FPS2W/EL/GG Manual de usuario
Salamander Designs
Salamander Designs FPS2W Manual de usuario
Salamander Designs
Salamander Designs FPS2W/EL/MS/GG Manual de usuario
Salamander Designs
Salamander Designs Webex Board Pro Manual de usuario
Salamander Designs
Salamander Designs FPSA/VR/3U Manual de usuario
