6
OPERATING INSTRUCTIONS
1. Remove the cement cover from
the unit to expose water tank.
2. Connect power adaptor to DC
power jack underneath unit.
3. Fill water tank with room
temperature tap water to
no higher than max. water
level line (4.7 fl oz | 140 ml) by
bringing water to the unit.
4. Add 10-15 drops (depending on
preference) of your favorite Saje
diffuser blend to the water. Tilting
the unit can cause water to run
into the diffuser’s ventilation
system and out the bottom — to
ensure correct usage, always bring
water to your ultrasonic diffuser
and not the other way around.
