Sage BJB615 Manual de usuario

BJB615 / SJB615

the 3X Bluicer™

EN QUICK GUIDE

Components

A. Food pusher (not dishwasher safe)

B. Juicer cover (dishwasher safe)

C. Stainless steel lter basket (dishwasher safe)

D. Filter bowl surround (dishwasher safe)

E. Interlocking safety arm

Stops motor base operating without

cover locked into place.

F. Control panel

G. Durable motor base

H. Inner measuring cup (dishwasher safe)

I. 1.5 litre blending jug & lid (dishwasher safe)

J. Juicing nozzle (dishwasher safe)

Can be placed over spout to juice

directly into a cup.

K. Drip stop plug (dishwasher safe)

L. Pulp container (dishwasher safe)

M. Cleaning brush (to clean the lter basket)

Rating Information

220–240V ~ 50–60 Hz 1000W

Assembly

BEFORE FIRST USE

Wash the lid, inner measuring cup, jug,

the lter bowl surround, lter basket, juicer

cover, food pusher and pulp container in

warm, soapy water with a soft cloth. Rinse

and dry thoroughly.

Place motor base on a at, dry surface

such as a countertop. Ensure that the

appliance is switched to OFF at the motor

base and the power cord is unplugged.

JUICING

1. Place lter bowl surround on top of the

motor base.

2. Align the arrows at the base of the

stainless-steel lter basket with the

arrows on the motor drive coupling and

push down until it clicks into place to

create a secure t with the motor base.

3. Place the juicer cover over the lter

bowl surround, positioning the

lower part of the feed chute over

the stainless steel lter basket.

4. Raise the safety locking arm up

and locate into the two grooves on

either side of the juicer cover.

5. The safety locking arm should now

be in a vertical position and locked

into place on top of the juicer cover.

6. Slide the food pusher down the food

chute by aligning the groove in the food

pusher, with the small protrusion on the

inside of the top of the feed tube.

Food

pusher

groove

Small

protrusion

inside

feed tube

7. Place the pulp container into position by

tilting and lifting the motor base slightly.

Insert the pulp container under the juicer

cover on the back ensuring the front edge

is tucked under the back lip of the lter

bowl surround and the bottom edge is

clipped into the bottom of the motor base.

8. Drip stop plug can be tted over juice

outlet nozzle. It then allows the outlet

to be plugged to prevent dripping

after juicing.

9. Optional: For juicing into a cup

the Juicing Nozzle can be tted onto the

juice outlet nozzle.

10. Fit the lid to the blender jug and position

jug under juice spout.

BLENDING

1. With the blender jug in the upright position

place it on the motor base. The handle

of the blender can be positioned to the

left or right-hand side of the appliance.

2. Raise the safety locking arm up

and locate into the two grooves

on either side of the blender.

3. Add food or liquid into the blender jug

ensuring not to exceed the ‘MAX’ mark.

Place the blender lid rmly into position

on the top of the blender jug. Insert

the clear, inner measuring lid into the

blender lid and turn clockwise to lock

into position.The jug features a Sage

Assist™ Lid. This allows the lid to t

tightly onto the blender jug, avoiding

displacement during operation.

4. Do not ll the blender jug above the

‘MAX’ line.

5. Ensure the spout cover of the

blender lid is clipped into place and

closed. The ring pull design allows

the user to easily remove the lid

with a simple leverage action.

After appliance is assembled into blender

or juicer conguration, plug power cord

into a 220–240V power outlet and turn on.

Press the ON / OFF button to turn the

appliance on. The ON / OFF button will

illuminate. The LCD timer screen will

illuminate with ‘0:00’ displayed.

Functions

GETTING STARTED

The ON / OFF button powers the unit into

READY mode.

PRESET PROGRAMS

BLENDING

The appliance has 4 preset functions:

Smoothie, Pulse / Ice Crush, Auto

Clean and Frozen Cocktail. These pre-

programmed cycles automatically adjust

the blending time and speeds to optimise

blending results. These programs are

only activated when your appliance is in

blender set up. They can't be used when

your appliance

is set up in juicing conguration.

Select the required function by pressing

the corresponding function button. The

unit will start to operate, and the selected

function button will illuminate. The timer

will

start to count down and program will

end automatically when it reaches '0:00'.

The program and timer can be paused by

pressing the pause button. Resume by

pressing program button again, or cancel

by pressing pause again.

The program can also be cancelled at any

time by pressing the ON|OFF button. The

timer will reset to 0:00

Smoothie

For dairy-based smoothies, a combination

of speeds and pulses are designed

to combine and aerate ingredients into

a smooth and creamy texture.

Pulse / Ice Crush

A program of continuous pulsing designed

to chop food into an even consistency or

crush ice cubes. Use the PULSE button

when the food that is being processed is

too thick or coarse to circulate within the

blender jug.

The maximum amount of ice cubes

the blender can blend at any one time

without liquid in the jug is 1 standard

ice tray or 250g.

Frozen Cocktail

For creating ice-based cocktails and drinks

like Margaritas, Daiquiris and Slushies,

an ice crush program is followed by

a short blend.

Auto Clean

Use to remove most of the ingredients

o the blender walls and blades. Add 2

cups of warm, soapy water and press the

clean button. For harder to clean, sticky

or thick ingredients, add ½ teaspoon of

dishwashing detergent for extra cleaning

power.

For best results, clean the blender jug

this way immediately after use. The Auto

Clean function only cleans the blender

jug. It doesn't clean the juicer.

Speed Control Selection

There are 5 speed buttons. Speed 1

combines more delicate foods with a folding

motion, good for combining wet and dry

ingredients. Speed 5 is the fastest setting

and is ideal for breaking down ingredients

to create sauces, salad dressings and other

nely blended mixtures.

JUICING

Most fruit and vegetables such as apples,

carrots and cucumbers will not need to

be cut or trimmed to size as these will

t whole into the feed chute. Ensure

vegetables such as beets, carrots etc.

have

all soil removed, are washed well and

trimmed of leaves before using.

1. Plug the power cord into your

220–240V power outlet.

IMPORTANT

Do not load feed chute with produce

before the Juicer has reached the selected

speed.

2. Turning the Juicer On

Select desired speed setting by pressing

button 1-5. Use lower numbers (1-3) for

soft fruits and vegetables and higher

numbers (4 and 5) for hard fruits and

vegetables. See Speed Selector Guide

table on the next page to match speed

and produce type for maximum yield.

"Low" range, while it may not maximise

yield of some produce, allows you to

extract juice at a signicantly lower noise.

3. With the motor running, place food into

the feed chute and use the food pusher

to gently guide food down. To extract

the maximum amount of juice, always

push the food pusher down slowly.

4. Full Blender Jug

You can keep juicing until the

jug is lled to MAX. level.

WARNING

Never use ngers, hands or utensils to

push food down the feed chute or to clear

the feed chute. Always use the food pusher

provided.

CAUTION:

sharp blades

The stainless steel lter basket contains

small sharp blades to cut and process fruit

and vegetables. Avoid touching the blades

when handling the lter basket.

SPEED SELECTOR GUIDE

FOOD TYPE SPEED

APPLES 5

BABY SPINACH 5

BEETROOTS 5

CAPSICUMS 5

BLUEBERRIES 3

BROCCOLI 4

CABBAGE 5

CARROT 5

CELERY 2

CITRUS FRUITS (peeled) 1

CUCUMBER 2

GINGER 4

GRAPES (seedless) 2

HONEYDEW MELON (peeled) 3

KALE 4

KIWI (peeled) 4

MANGO (peeled, stone

removed)

MINT 5

PEACH (pit removed) 2

PEARS 4

PINEAPPLE (peeled) 4

RHUBARB 4

SQUASH 5

STRAWBERRIES 3

TOMATOES 3

WATERMELON (peeled) 2

ZUCCHINI 4

Care & Cleaning

Ensure the motor base is turned o by

pressing the ON / OFF button. Then

unplug the power cord.

CLEANING

1. Remove Blender Jug.

2. Disengage Locking Bar, pull

up entire Juice Collector

Assembly and take to sink.

3. Remove Pulp Container.

Empty as much pulp as possible into bin/

compost. Rinse all parts after use (except

the motor base) under running water to

clear away the majority of juice and pulp.

Wash in warm soapy water with a soft

cloth.

To avoid food drying on to the blades,

mesh or transparent parts, rinse and wash

as soon as possible after use.

PULP CONTAINER

To minimize cleaning, you can line the

pulp container with a biodegradable bag to

collect the pulp.

MOTOR BASE

Wipe down with a soft damp cloth. Do not

immerse the motor base in liquids.

CLEANING AGENTS

Do not use abrasive scouring pads or

cleaners on either the motor base or the

jug, as they may scratch the surface. Use

only warm soapy water with a soft cloth.

JUG AND LID

In order to keep your Jug clean and avoid

food drying on the blades and jug, follow

the below steps as soon as possible after

use.

Rinse most of the ingredients o the jug

and lid.

Fill the jug with 500ml of warm water, t

the lid and press the AUTO CLEAN button.

If thick or sticky ingredients require extra

cleaning power add a few drops of dish

liquid detergent.

Rinse the jug and lid again and/or wash

separately in warm soapy water with a soft

cloth or bottle brush.

It is most eective to clean the jug

immediately after use.

FILTER BASKET

To ensure consistent juicing results,

always clean the lter basket thoroughly

immediately after use, using the brush

provided.

If pulp is left to dry, it may clog the ne

pores of the lter mesh, which can aect

juicing performance. The lter basket can

be soaked in hot soapy water for 10

minutes, if necessary.

DISHWASHER

All parts except for the motor base and

food pusher are dishwasher safe. The

blender jug can be placed on the bottom

shelf of the dishwasher, however the

lid and inner measuring cup should be

washed on the top shelf only. However,

washing parts on a regular basis in the

dishwasher can shorten the life of them

due to prolonged exposure to harsh

detergents, hot water and pressure.

Cleaning the parts in the dishwasher may

also cause parts to deteriorate so inspect

the parts regularly and stop using the

product if any signs of damage is noticed.

STUBBORN FOOD STAINS

Strong smelling foods such as garlic, sh

and some vegetables such as carrots may

leave an odour or stain on the blender

jug and lid. To remove, soak blender jug

and lid for 5 minutes in warm soapy water.

Then wash with a mild detergent and warm

water, rinse well and dry thoroughly. Store

jug with the lid o.

STORAGE

Store the appliance upright with the

blender jug assembled on the motor base,

or beside it. Do not place anything on top.

To allow air to circulate, keep the lid o.

WARNING

Oils in citrus rind can damage the material

of your blender jug if being exposed to

it for a longer period. Always clean your

blender jug immediately after processing

citrus rind.

Troubleshooting

LCD screen turns on

but appliance doesn't

respond to controls.

• The safety locking arm may not be correctly engaged in the vertical

operating position. In this case, the LCD screen will show an animated

prompt . Check the top cover is properly aligned and the locking arm

is located rmly into the two grooves on either side of the juicer cover or

blender jug.

Food is unevenly

chopped

• This can happen when too much food is being added at one time.

Try a smaller amount, and work in batches if necessary.

Food is chopped too

ne or is watery

• Try blending for shorter period of time. Use the PULSE function for

better control.

Excess pulp building

up in the stainless-

steel lter basket

• Turn the appliance o. Disassemble to scoop excess pulp o the juicer

cover.

• Reassemble and continue juicing. Alternating soft and hard ingredients

may help avoid this.

Pulp too wet

and reduced

extracted juice

• Pusher force could reduce yield because it slows the motor down.

Avoid putting pressure on the food pusher when pushing ingredients

down the feed chute.

• The cleaner the lter, the better the juice yield, and dryer the pulp. Be sure

to thoroughly clean the juicer as soon as possible after each use. Remove

the stainless-steel lter basket and thoroughly clean mesh walls with a

cleaning brush. Rinse the lter basket under hot water. If the ne mesh

holes are blocked, soak the basket in a solution of hot water with 10%

lemon juice to unblock the holes or wash in the dishwasher (top shelf). This

will remove excess ber build up which could be inhibiting the ow.

• If juicing large amounts of brous ingredients like rhubarb and pineapple,

cleaning the lter basket in between might be required.

Juice leaks between

the lter bowl

surround and the

juicer cover

• Ensure the appliance assembled correctly

• Try a slower juicing speed (if possible) and push the food pusher down the

feed chute more slowly.

• Ensure there is no build up in the lter basket.

Juice sprays out

from spout

• The juice is being extracted too fast; try a slower juicing speed (if possible)

and push the food pusher down the feed chute more slowly.

Juice in lter

bowl is left after

juicer stopped

• Turn the speed dial up to highest speed setting and operate for ve

seconds. That can help moving the remaining juice into the jug.

Otros manuales para BJB615

Tabla de contenidos

Otros manuales de Exprimidor de Sage

Sage

Sage BJE520UK Manual de usuario

Sage

Sage Nutri Juicer Pro BJE820UK Manual de usuario

Sage

Sage Nutri Juicer BJE410 Manual de usuario

Sage

Sage Citrus Press 800CP Manual de usuario

Sage

Sage Nutri Juicer SJE410 Manual de usuario

Sage

Sage Nutri Juicer Cold BJE430 Manual de usuario

Sage

Sage Nutri Juicer Cold Plus BJE530 Manual de usuario

Sage

Sage the Nutri Juicer Cold Manual de usuario

Sage

Sage Nutri Juicer Cold BJE430 Manual de usuario

Sage

Sage Nutri Juicer Pro Manual de usuario

Sage

Sage the Nutri Juicer Cold XL BJE830 Manual de usuario

Sage

Sage Nutri Juicer Cold SJE430 Manual de usuario

Sage

Sage the Big Squeeze BJS700 Manual de usuario

Sage

Sage Nutri Juicer Cold Plus Manual de usuario

Sage

Sage Citrus Press Pro 800CP Manual de usuario

Sage

Sage Nutri Juicer Classic SJE95 Manual de usuario

Sage

Sage SCP800 Manual de usuario

Sage

Sage the Citrus Press Pro SCP800 Manual de usuario

Sage

Sage Nutri Juicer BJE410 Manual de usuario

Sage

Sage the Nutri Juicer Plus SJE520 Manual de usuario

Sage

Sage the Nutri Juicer Plus BJE520UK Manual de usuario

Sage

Sage Nutri Juicer Cold BJE430 Manual de usuario

Sage

Sage Citrus Press Pro 800CP Manual de usuario

Sage

Sage the Citrus Press Pro SCP800 Manual de usuario

Manuales populares de Exprimidor de otras marcas

GE 169201 Manual de usuario

Exquisit

Exquisit ZP 3001 WET Manual de usuario

Philips

Philips HR1851 Manual de usuario

Sam Cook

Sam Cook MASTERCHEF EXECUTIVE PSC-50 Manual de usuario

Termozeta

Termozeta spremiagrumi Manual de usuario

ElectrIQ

ElectrIQ WF1000 Manual de usuario

Bella

Bella WHOLE FRUIT JUICER Manual de usuario

HAEGER

HAEGER Little Juice CJ-025 006A Manual de usuario

Havells

Havells Fusion Manual de usuario

Siemens

Siemens MK554 SERIES Manual de usuario

Beper

Beper 90.302B Guía rápida

NATURSAFT

NATURSAFT 015.401.3 Manual de usuario

Moulinex

Moulinex BKB 2 Manual de usuario

Royal Catering

Royal Catering RCJU-01 Manual de usuario

camry

camry CR 4002 Manual de usuario

AIGOSTAR

AIGOSTAR 30HIM Manual de usuario

ZUMEX

ZUMEX MINEX Manual de usuario

Skymsen

Skymsen EX Manual de usuario