Safe Fleet Prime Design PCC-6001 Manual de usuario

PRIME DESIGN, A SAFE FLEET BRAND ▪ Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118

Toll Free: 1.8.PRIME.RACK ▪ Fax: 651-552-1799 ▪ Email: [email protected] ▪ Website: www.primedesign.net

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability

(the “Prime Design Limited Warranty”).

▪

TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

2

3

10

7

8

4

5

6

9

1

Channels (2X)

Screws (8X) End Caps (4X) Brackets (4X)

PCC-6001 ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS

CONTENTS OVERVIEW

2—Rear Crossbar Assembly.................................. (Qty 1)

3—Front Crossbar Assembly ................................. (Qty 1)

4—Handle Latch Assembly ................................... (Qty 1)

Right Hand

5—Handle Latch Assembly ................................... (Qty 1)

Left Hand

1—FBM-0002 ........................................................ (Qty 1)

Channels with hardware

INSTALLER NOTE: Mounting Hardware or

Brackets to attach this rack to a vehicle

roof or cap are not included in this kit,

and must be purchased separately.

To purchase Mounting Hardware or

Brackets, please contact Prime Design

Sales & Support.

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability

(the “Prime Design Limited Warranty”).

▪

TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

3

PCC-6001 ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS

8—Quick Clamp Tube Splice Assembly ................ (Qty 2)

5.00“

6—Front Hook Assembly ....................................... (Qty 2)

7—Clamp Down Tube ............................................ (Qty 2)

104.00” w/Tube Splice

9—Removeable Horn with Cap............................. (Qty 2)

15.00”

10—Clamp Down Handle Assembly ..................... (Qty 2)

M8 x 45MM (1X)

M8 Lock Nut (1X)Clamp Down Handle (1X) " Flat Washer (2X)

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability

(the “Prime Design Limited Warranty”).

▪

TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

4

Rear

Front

Left

Right

Crossbar Rear

Flush to end

Rear

Front

Left

Right

Crossbar Rear

Flush to Channel End

91.00”

*Note: Use Alternate instructions if marked distances exceed 18” (457mm).

*See Note

PCC-6001 ASSEMBLY INSTRUCTIONS–FBM MOUNTINGS

FBM-0002 FLUSH

CHANNELS TO PRE–INSTALLED

MOUNTING BRACKETS

A.1

A.2

Loosen nuts

A.4

Loosen nuts

A.5 Set to distances then torque Rear Bracket nuts to 90 in-lbs

A.3 Set to distances then torque nuts to 80 in-lbs

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability

(the “Prime Design Limited Warranty”).

▪

TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

5

Rear

Front

12—5/16” (313mm) from end

Crossbar Rear

Left

Right

Rear

Front

Left

Right

Crossbar Rear

Flush to Channel End

91.00”

*Note: Move Channels rearward if marked front distance exceeds 18” (457mm).

*See Note

PCC-6001 ASSEMBLY INSTRUCTIONS–FBM MOUNTINGS

B.1

B.2

Loosen nuts

B.4

Loosen nuts

B.5

B.3

Set to distances then torque Rear Bracket nuts to 90 in-lbs

Set to distances then torque nuts to 80 in-lbs

FBM-0002 ALTERNATE

CHANNELS TO PRE–INSTALLED

MOUNTING BRACKETS

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability

(the “Prime Design Limited Warranty”).

▪

TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

6

1

2

3

5

4

Even Even

Rear

Front

Rear

PCC-6001 ASSEMBLY INSTRUCTIONS–RIGHT SIDE CLAMP DOWN

RIGHT CLAMP DOWN

ASSEMBLY SEQUENCE

CROSSBARS CROSSBAR ADJUSTMENT

1.1

Torque to 90 in-lbs

1.2

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability

(the “Prime Design Limited Warranty”).

▪

TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

7

PCC-6001 ASSEMBLY INSTRUCTIONS–RIGHT SIDE CLAMP DOWN

CLAMP DOWN HANDLE CLAMP DOWN TUBE

2

3.2

3.1

3.3

3.4

Torque to 90 in-lbs

HANDLE LATCH FRONT LADDER HOOK

SEE QUICK START GUIDE FOR ADJUSTMENTS

4.2 Torque to 90 in-lbs

4.1

5.2

Torque to 90 in-lbs

5.1

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability

(the “Prime Design Limited Warranty”).

▪

TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

8

6

7

9

8

PCC-6001 ASSEMBLY INSTRUCTIONS–LEFT SIDE CLAMP DOWN

LEFT CLAMP DOWN

ASSEMBLY SEQUENCE

CLAMP DOWN HANDLE CLAMP DOWN TUBE

6

7.2

7.1

7.3

7.4

Torque to 90 in-lbs

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability

(the “Prime Design Limited Warranty”).

▪

TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

9

PCC-6001 ASSEMBLY INSTRUCTIONS–LEFT SIDE CLAMP DOWN

HANDLE LATCH FRONT LADDER HOOK

SEE QUICK START GUIDE FOR ADJUSTMENTS

8.2

Torque to 90 in-lbs

8.1

9.2

Torque to 90 in-lbs

9.1

Page Intentionally Left Blank

Safe Fleet Prime Design PCC-6001 Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas