Saeco PRIMEA LINE Manual de funcionamiento



Primea Line

Primea 2006 From page 02 to page 79

Primea 2007 From page 80 to page 158

REV. 02 - Mar. 07

TECHNICAL SERVICE

MANUAL

PRIMEA

LINE

Issue May 2006

This document and relative information herein is provided without liability deriving from any errors or omissions. Furthermore,

no part may be reproduced, used or collected with the exception of that authorized in writing or in accordance with a contrac-

tual clause.

REV. 02 - Mar. 07

PRIMEA Contents

1/1

PRIMEA TECHNICAL SERVICE MANUAL (Rev.02 March 07)

1. Introduction (rev.00)

1.1 Documentation required

1.2 Tools and equipment required

1.3 Safety warnings

2. Technical data (rev.00)

2.1 Product technical data

2.2 Internal / external machine components

3. Summarized instructions (rev.02)

3.1 Client and programming menu (rev.00)

3.2 Maintenance and cleaning (rev.02)

4. Diagrams (rev.00)

4.1 Wiring diagram (rev.00)

4.2 Component load table (rev.00)

4.3 Water circuit diagram (rev.00)

5. Troubleshooting (rev.02)

5.1 Primea Touch and Touch Plus test functions (rev.01)

5.2 Primea Touch e Touch Plus diagnosis function (rev.02)

5.3 Primea Ring test functions (rev.01)

5.4 Primea Ring diagnosis function (rev.01)

5.5 Error messages for Service personnel (rev.01)

6.5 Problems, Causes, Remedies (rev.01)

6. Operating logic (rev.02)

6.1 Multi-way valve (rev.01)

6.2 Autocappuccino facility (rev.01)

6.3 Motor-driven tray (rev.00)

6.4 Prima water (rev.01)

6.5 SBS valve (rev.00)

7. Component assembly / disassembly (rev.01)

7.1 Top cover (rev.00)

7.2 Right side cover (rev.00)

7.3 Left side cover (rev.00)

7.4 Coffee dispensing head (rev.00)

7.5 Electronics (rev.00)

7.6 Gearmotor (rev.00)

7.7 Pump (rev.00)

7.8 Boiler and multi-way valve assembly (rev.00)

7.9 Boiler (rev.00)

7.10 Multi-way valve (rev.01)

7.11 Oetiker clamp assembly and disassembly (rev.00)

7.12 Coffee grinder (rev.00)

7.13 Grinder adjustment/assembly and disassembly

7.14 Strength adjustment (rev.00)

7.15 Autocappuccino facility (rev.01)

7.16 Motor-driven drip tray (rev.00)

8. Maintenance schedule (rev.01)

8.1 Routine maintenance Check list (rev.01)

9. Amendments made to technical service manual (rev.00)

9.1 Latest amendments (rev.00)

REV. 02 - Mar. 07

CHAPTER 1

INTRODUCTION

REV.00

PRIMEA Chapter 01

REV. 02 - Mar. 07

1.1 Documentation required

The followingtechnical documentationlis required for repairs:

Instruction booklet for speciﬁc model

Technical documentation for speciﬁc model (diagrams, exploded drawings)

1.2 Tools and equipment required

As well as the standard equipment, the tools listed below are required.

1 Special screwdriver with Torx T15 tip and Pozi Drive screwdriver for casing and work

on the coffee grinder.

1 Digital thermometer with full 200°C scale

This must be suitable for measuring in liquids and on surfaces.

1 Set of pliers for Oetiker clamps

1 Pincer

1.3 Safety warning

Before starting operations on the machine, consult the instruction booklet.

Observe all current standards related to the repair of domestic appliances.

Always disconnect the power plug from the mains before carrying out repairs. Simply turning

off the main switch is not sufﬁcient to prevent electrical discharge.

This domestic appliance is rated as insulation class I.

Insulation and dielectric rigidity tests must be performed on completion of repairs.

1/1

PRIMEA Chapter 01

REV. 02 - Mar. 07

CHAPTER 2

TECHNICAL DATA

REV.00

PRIMEA Chapter 02

REV. 02 - Mar. 07

2.1 Product and component technical data

Power supply and output: 230 V~, 50 Hz, 1500 W / 120 V~,50/60 Hz, 1300 W

Temperature control: 2 (NTC) variable resistor sensors – transmit the value to

the electronic board

Safety system: Thermostat at 170°C with manual reset on

both heaters + 192° fuse

Coffee heat exchanger output:

Stainless steel

Steam heat exchanger output

Stainless steel

1300 W - to dispense coffee and hot water

1090 W – for steam delivery

Motor-driven tray 24 V stepper motor

Water levelsensor Capacitive sensor

Gearmotor: DC motor (24 V) in two directions

of rotation

Cup warmer plate: Activated via MENU display

PTC Type

Pump: Ulka reciprocating piston type with thermal cutout at

100°C

48 W, 230 V, 50 Hz, Type EP5 GW

41 W, 120 V, 50 Hz

approx. 13 - 15 bars

Pressure relief valve: Opening at approx. 17 - 19 bars

Water ﬁlter: In tank

Coffee grinder: DC motor with ceramic plate

grinders

Coffee strength control Hall sensor – Pulse control. Dose adjustment can

be set from 7 – 10 g.

Multi-function valve Beverage selection control

Cappuccino valve Enables automatic frothing

Amps: During heating phase

approx. 5.6 A to 230 V / 10.8 A to 120 V

Energy consumption: On Stand –By approx. 4.6 Wh in machine ready status no

beverages dispenses 39 Wh 4.5 A (230 V)

Dimensions: l x h x d in mm: 350/390/430

Weight: 14 kg

Water tank holds: 1.75 l

Coffee container capacity 350 g. pre-ground coffee

Milkcontainer capacity 0.32 l.

Heat exchanger capacity: approx. 10 cc

Water circuit ﬁlling time: approx. 10 sec on ﬁrst ﬁlling cycle

Heating time: approx. 55 sec.

Dispensed drink temperature: approx. 73°C - 83°C

Grinding time: approx. 6-8 sec.

1/3

PRIMEA Chapter 02

REV. 02 - Mar. 07

Grounds drawer

Service

door

Main on/off

switch

Pre-ground

coffee bin

Pre-ground coffee

container lid

Pre-ground coffee

container

Cup

warmer

Touchscreen

display

SBS

Brew

group

Drip

tray

Button to raise/lower

drip tray

Milk tank com-

partment

Water tank

Hot water dispense

pipe (spout)

Brew group Drip tray

2.2 Internal / external machine components

2/3

External:

PRIMEA Chapter 02

REV. 02 - Mar. 07

Internal:

Gearmotor unit

compartment

Multi-way valve

Boiler unit

Pump

assembly

Coffee grinder

Door

microswitch

Cappuccino maker

unit

Power board

PRIMEA Chapter 02

3/3

REV. 02 - Mar. 07

CHAPTER 3

BRIEF

INSTRUCTIONS

REV.02

PRIMEA Chapter 03

Tabla de contenidos

Otros manuales de Cafetera de Saeco

Saeco

Saeco XXCX Manual de usuario

Saeco

Saeco Moltio HD8766/04 Instrucciones de montaje

Saeco

Saeco EXPRELIA HD8854 Manual de usuario

Saeco

Saeco Royal OTC SUP060 Guía de instalación

Saeco

Saeco Primea Cappuccino Ring Manual de usuario

Saeco

Saeco Royal Digital Plus Manual de usuario

Saeco

Saeco Xsmall Plus Manual de usuario

Saeco

Saeco Syntia Manual de usuario

Saeco

Saeco XELSIS SM7686 Manual de usuario

Saeco

Saeco RI9754/43 Instrucciones de funcionamiento

Saeco

Saeco HD8761 Manual de usuario

Saeco

Saeco SUP 038 Manual de usuario

Saeco

Saeco AMBRA SUP 015VR Instrucciones de funcionamiento

Saeco

Saeco Intelia Evo HD8752 Manual de usuario

Saeco

Saeco Intelia Deluxe HD8904 Manual de usuario

Saeco

Saeco 10003106/EU Manual de usuario

Saeco

Saeco Minuto HD8763/09 Instrucciones de montaje

Saeco

Saeco 10000006 Manual de usuario

Saeco

Saeco RI9722/11 Manual de usuario

Saeco

Saeco Moltio HD8769 Instrucciones de montaje

Saeco

Saeco GranBaristoAvanti HD8967 Instrucciones de montaje

Saeco

Saeco RI9345/11 Manual de usuario

Saeco

Saeco Lavazza Omnia 120V Guía de instalación

Saeco

Saeco XSMALL HD8644 Manual de usuario

Manuales populares de Cafetera de otras marcas

Taurus

Taurus Livorno 6 Manual de usuario

Delta-q

Delta-q QUICK Manual de usuario

Bunn

Bunn LCA-1 Guía de solución de problemas

Black & Decker

Black & Decker BLACK DECKER HOME DE790 Instrucciones de instalación

DeLonghi

DeLonghi DC300 Manual de usuario

INCAPTO

INCAPTO BXCO1470E Manual de usuario

Bosch

Bosch TASSIMO finesse TAS16B Series Manual de usuario

Exido

Exido 245-072 Manual de usuario

Animo

Animo OptiVend Choco Manual de usuario

Siemens

Siemens TQ505DF Series Manual de usuario

DeLonghi

DeLonghi ECI341 Manual de usuario

Krups

Krups KT406511 Manual de usuario

Cimbali

Cimbali M32 Classic Manual de usuario

Philips

Philips HL3844N Manual de usuario

Bosch

Bosch TES 515 SERIES Manual de usuario

Tekmatix

Tekmatix TMFM - 65 Manual de usuario

Scarlett

Scarlett SC-CM33005 Manual de usuario

LAVAZZA

LAVAZZA CLASSY PLUS Manual de usuario