SACKit TOUCHit Over-Ear Manual de usuario
1
TOUCHit Over-Ear
2020 User manual
UK
DK
DE
2
CONTENT
Thank you! ......................... 3
Quick Start Guide .................. 4
Product overview .................. 4
Product functionality............... 5
The Device ......................... 6
Product setup ...................... 8
Troubleshooting ................... 9
Cleaning of the product ............ 10
Technical specifications ............ 10
Important safety information ...... 11
Disposal of the product ............ 12
Complaints ......................... 12
Tak!................................. 13
Quick Start Guide .................. 14
Produkt overblik ................... 14
Produkt funktioner................. 15
Beskrivelse af produktet ........... 16
Produkt opsætning................. 18
Troubleshooting ................... 19
Rengøring af produktet ............ 20
Tekniske specifikationer ........... 20
Vigtig sikkerhedsinformation ...... 21
Bortskaffelse af produktet ......... 22
Reklamationer...................... 22
Vielen dank! ........................ 23
Kurzanleitung ...................... 24
Produktübersicht .................. 24
Funktionen ......................... 25
Produktbeschreibung .............. 26
Produkteinstellung................. 28
Fehlersuche ........................ 29
Reinigung........................... 30
Produktangaben ................... 30
Entsorgung......................... 32
Reklamation ........................ 32
3
THANK YOU!
Thank you for purchasing the TOUCHit Over-Ear Bluetooth & Active Noise Cancellation headphone
from SACKit. Please read the entire instruction manual before using the product and save it for
future reference. We reserve the right to change or update information and to correct errors,
inaccuracies, or missions in text, images, and technical data. If you have any questions regarding
technical problems please contact our customer services. We hope you will enjoy your new
TOUCHit Over-Ear headphones.
Let SACKit rock your life!
CONGRATULATIONS on your new SACKit product!
Register your new SACKit product and get cool benefits.
1. Go to https://sackit.eu/reg
2. Enter name, e-mail, and product*
Box contents
1. TOUCHit Over-Ear headphone
2. Fabric travel pouch
3. 3.5mm audio cable
4. USB charging cable
5. Quick start guide
*When you register your product, you agree to receive email newsletters from SACKit.
4
QUICK START GUIDE
When you first get your TOUCHit Over-Ear headphones you need to charge them before they are
ready for use. TOUCHit Over-Ear is charged by using the included USB cable.
Charge TOUCHit Over-Ear for 4 hours minimum before using the product the first time.
Please turn off your headphones after use to prolong battery life.
PRODUCT OVERVIEW
9. 3.5mm AUX
2. Active Noise Cancela-
tion (ANC)
6. Volume up/down
7. X Button
4. Charging Port
3. LED Charging Indicator
5. Headband
1. Over-Ear Design
8. Power Indicator
5
PRODUCT FUNCTIONALITY
Here follows a description of all the products features. Please use the Overview in the beginning of
this user manual to locate them on the TOUCHit Over-Ear (page 4).
1. Over-ear design
• TOUCHit Over-Ear’s design ensure both comfort and sound quality by directing sound at you and
encapsulates the whole sound without being uncomfortable to wear for a longer time
2. Active Noise Cancelation (ANC)
• Press the Active noise cancellation button to activate ANC
• With ANC activated you can minimize background noise to further enjoy your music
3. LED Charging Indicator
• Turns on when TOUCHit Over-Ear is charging
4. Charging port
• Charging port for the included USB charging cable
5. Headband
• Adjustable headband to ensure a comfortable t for everyone
6. Volume up/down
• Volume buttons used to adjust the volume of TOUCHit Over-Ear
• Also used to skip to next or previous song
7. X Button
• Master function button
• Used to power TOUCHit Over-Ear on and off
• Plays and pause music when the headset is in Bluetooth mode
• Accepts and rejects incoming calls
8. Power indicator
• Indicates when TOUCHit Over-Ear is turned on and off
• Flashes when TOCHit is in Bluetooth pairing mode
9. 3.5MM AUX
• 3.5 mm AUX jack connection to connect the headset to a device without Bluetooth
• In-line use is possible when the battery is empty
6
How to pair TOUCHit Over-Ear and your device
1. For rst use: Long press the X Button for 10 seconds. After the rst 5 seconds, you will hear the
ON sound. Keep pressing the button for another 5 seconds to turn on pairing mode, indicated by
ashing the power indicator red and blue
2. Switch on Bluetooth on your device
3. Choose “TOUCHit Over-Ear” under Bluetooth settings on your device. Your headphones are now
con-
nected with your device
4. Start playing music on your device
5. Long press the X button to turn off your TOUCHit Over-Ear headphones
6. TOUCHit Over-Ear will automatically pair with the last connected device
To connect to a new device make sure that the previous connected device is disconnected otherwise
connecting opportunity won’t appear on the new device.
THE DEVICE
How to use the Active Noise Cancellation function
1. Push the ANC button on the left ear cup turning on the green LED light and you can enjoy the
headphones in Active Noise Cancellation mode
2. When you don’t need the Active Noise Cancellation function, turn the ANC function of by pus-
hing the ANC button
3. Active Noice Cancellation can be activated and deactivated even when the TOUCHit Over-Ear
Headphone is turned off. The Active Noise Cancellation will also remain on even when you turn
the TOUCHit Over-Ear Headphone off.
Operation instructions for use after first pairing
1. After rst time pairing your TOUCHit Over-Ear headphones and
2. Bluetooth device will automatically reconnect, the LED light will blink blue once TOUCHit Over-
Ear is successfully paired.
3. Turn the headphones on by holding down the X button until you hear the ON sound
4. Long press X button to turn off TOUCHit Over-Ear
Note: If the pairing is not successful, please turn the headphone off and back on and retry pairing.
Operation instructions for in-line use
Use the 3.5mm audio cable when you do not wish to use Bluetooth connection or when the battery
needs recharging. In-line use is possible when the battery is empty.
For in-line use:
• Connect the 3.5mm plug into your TOUCHit Over-Ear Headphone 3.5mm jack, then connect the
other 3.5mm plug to your device 3.5mm jack
• Adjust the volume using the controls on your mobile phone
• Enjoy the music
7
Battery information
• Battery: rechargeable Polymer Lithium-Ion Battery, DC: 3.7V/500mAh
• Power: USB DC5V, Please use the USB cable sealed with our headphone for charging
• Charging Time: For rst time use please be sure the battery has been charged fully before use. It
needs more than 4 hours of charging the rst time, then 2-3 hours for recharging
• When the red light is on, the headphone is in charge mode. The red light will turn off when the
battery is fully charged.
8
Making calls with TOUCHit Over-Ear
When TOUCHit Over-Ear connected to your device, you can answer and take calls through the
headphones wirelessly.
Functions Status of headphone Operation
Redial Last number Standby mode Short press X button twice
quickly
Volume up Conversation mode Short press Volume + button
Volume down Conversation mode Short press Volume - button
Answering calling Ringing Short press X button
End call Conversation mode Short press X button
Reject calling Ringing Press and hold X button for
one second until you hear
indication sound
Transfer the calling between
headset and Bluetooth
devices
Conversation mode Press and hold the X button
for 3 seconds can transfer
the conversation from
headset to mobile phone.
Then press and hold the
X button for 3 seconds to
transfer the conversation
back from mobile phone to
headphone.
Note: Not all the mobile phones support all the functions listed above. Please refer to the instruction
of your device. Some functions and indication tones may vary with depending on the device.
PRODUCT SETUP
Here follows a description of the setup of the product. A detailed description of the button’s and
functionality can be found at pages 4 to 5.
Playing Music with TOUCHit Over-Ear
When TOUCHit Over-Ear connects with the mobile phone or Bluetooth transmitter, you can enjoy
music through the headphone wirelessly.
Functions Status of headphone Operation
Pause Playing music Short Press X button
Play Pausing Short Press X button
Next track Playing music Short press volume+ button
Previous track Playing music Short press volume–button
Volume up Playing music Long press Volume + button
Volume down Playing music Long press Volume - button
9
TROUBLESHOOTING
If you have trouble using your TOUCHit Over-Ear we ask you to try the following solutions. If these
solutions does not x your problem please contact our customer service at [email protected].
I experience issues with stability and connection
• Try to delete the pairing between TOUCHit Over-Ear and your device on the device. You do this
by accessing the Bluetooth settings on your device and choose “forget TOUCHit Over-Ear”. Now
pair TOUCHit Over-Ear and your device by following the description found on 6
TOUCHit Over-Ear is not playing music while connected to my device
• Please check volume on your audio device to make sure it is outputting sound
• If you use in-line please make sure that the 3.5mm plug is fully inserted into your audio device
and headset. And please make sure the headphone plug and audio device’s jack sticks are clean
• If TOUCHit Over-Ear is used wirelessly and still is not playing music, you manually have to choose
to play from TOUCHit Over-Ear in your device settings. Please refer to the instruction of your
device or specic app for further information
I’m hearing a beep-sound in my headset
• When TOUCHit Over-Ear makes a beep-sound, they need recharging. Please charge your
headphones fully
I don’t feel like TOUCHit Over-Ear is comfortable to wear
• Please adjust the length headband by pull/pushing the earcups to adjust to headset for a
comfortable t
I can’t turn on my headset
• Please recharge your headset by leaving the headset in the charger for minimum 4 hours
10
CLEANING OF THE PRODUCT
1. Kindly switch off TOUCHit Over-Ear before you clean your headset and remove it from the power
supply
2. Do not use any chemicals to clean the product. If you need to clean the headset, please use a soft
cloth with a mild cleaner
3. During cleaning please be aware to avoid water in the USB port, speakers, microphone, and but-
tons. Large amounts of water and uids may damage the headset
4. Use a soft, dry, and lint-free cloth to gently clean the speaker fabric.
NOTE: Avoid using sharp objects to clean TOUCHit Over-Ear earbuds and charging case
TECHNICAL SPECIFICATIONS
• Model: TOUCHit Over-Ear Bluetooth and ANC headphones
• Bluetooth version: V5.0
• Operating distance: 10M
• Battery: 500mAh
• Charging time: 3 hours
• Charging current: 220mA
• Music playing time:
25 hours (bluetooth on, ANC off)
18 hours (Bluetooth on, ANC on)
• Call time: 25 hours
• ANC solution: MAX
• Noise reduction performance: up to 22dB
• Driver Unit: Ø40mm
• Frequency Range: 20Hz-20KHz
• Impedence:ANC_OFF:80Ω ANC_ON :110Ω
• Size: 78*24*208mm
• Weight: 243g
Tabla de contenidos
Idiomas:
Otros manuales de Auriculares de SACKit
SACKit
SACKit Touch 200 Manual de usuario
SACKit
SACKit Speak 200 Manual de usuario
SACKit
SACKit Rock 100 Manual de usuario
SACKit
SACKit Touch 350 Manual de usuario
SACKit
SACKit Rock 250 Manual de usuario
SACKit
SACKit Touch 300 Manual de usuario
SACKit
SACKit WOOFit Manual de usuario
SACKit
SACKit ROCKit S Manual de usuario
SACKit
SACKit Rock 300 Manual de usuario
SACKit
SACKit TOUCHit S Manual de usuario
