SACKit ROCKit S Manual de usuario
1
ROCKit S
User manual
UK
DK
DE
2
CONTENT
Thank you! ................... 3
Quick Start Guide ............. 4
The Device ................... 5
Reset ROCKit S ............... 8
Troubleshooting .............. 9
Cleaning of the product ........ 10
Technical specifications ........ 10
Important safety information ... 11
Disposal of the product ........ 12
Complaints ................... 12
Tak! ......................... 13
Quick Start Guide ............. 14
Beskrivelse af produktet ........ 15
Reset ROCKit S ............... 18
Troubleshooting .............. 19
Rengøring af ROCKit S ......... 20
Tekniske specifikationer ........ 20
Vigtig Sikkerhedsinformation .... 21
Bortskaffelse af produktet ...... 22
Reklamationer ................ 22
3
THANK YOU!
Thank you for purchasing the ROCKit S True Wireless Earbuds from SACKit. Please read the entire
instruction manual before using the product and save it for future reference. We reserve the right
to change or update information and to correct errors, inaccuracies, or omissions in text, images, and
technical data. If you have any questions regarding technical problems please contact our customer
services. We hope you will enjoy your new ROCKit S True Wireless Earbuds.
Let SACKit rock your life!
CONGRATULATIONS on your new SACKit product!
Register your new SACKit product and get cool benefits.
1. Go to www.sackit.eu/reg
2. Enter name, e-mail, and product*
Box contents
1. ROCKit S earbuds
2. ROCKit S charging case
3. USB-C charging cable
4. Quick start guide
*When you register your product, you agree to receive email newsleers from SACKit.
4
QUICK START GUIDE
When you first get your ROCKit S earphones you need to charge them before they are ready for
use.
Start by placing your ROCKit S earbuds in the charging case. This is how the earbuds charge.
You can charge your case by using the attached USB-C cable and any 5V, 1A power supply.
Charge for 2 hours minimum.
The earbuds charge in the
charging case.
The charging case is charged
with a USB-C cable.
How to play music:
1. For rst use: remove ROCKit S earbuds from the case. Both earbuds will ash white on the top
edge LED
2. The le earbud will blink white, indicang ROCKit S is in pairing mode and the earbuds are con-
nected via True Wireless Stereo
3. Switch on Bluetooth on your device
4. Choose “ROCKit S” under Bluetooth sengs on your device. Your earbuds are now connected
with your device
5. Start playing music on your device
6. ROCKit S automacally switches on/o when connected/disconnected to the charging case. Ma-
nually power on/o by holding down the earbud buons for 10 seconds
7. ROCKit S will automacally pair with the last connected device.
To connect to a new device make sure that the previous connected device is disconnected otherwise
connecng opportunity won’t appear on the new device.
Please turn o your earbuds aer use to get a longer baery life. The earbuds turn o automa-
cally when placed in the charging case.
5
Battery information
• Baery: rechargeable Polymer Lithium-Ion Baery, DC: 3.7V/590mAh for charging case, 2 x
75mAh for earbuds
• Power: USB DC5V, Please use the USB-C cable included with your ROCKit S earbuds for charging
• Charging Time: For rst me use please be sure the baery has been charged fully before use. It
needs more than 2 hours of charging the rst me, then 2 hours for recharging
THE DEVICE
Correct placement of the ROCKit S earbuds
Place the earbuds in the ears like shown below. It is important that you place the inside ear support
downwards. You can twist the earbuds unl you nd the right placement.
Touch buons
Charging port
Charging LED
indicator
Placement of
right earbud
6
Use ROCKit S earphones
1. For rst use: Remove ROCKit S earbuds from the case. Both earbuds will blink white on the top
edge LED
2. The le earbud will blink red/white, indicang ROCKit S is in pairing mode and the earbuds are
connected via True Wireless Stereo
3. Switch on Bluetooth on your device
4. Choose “ROCKit S” under Bluetooth sengs on your device. Your earbuds are now connected
with your device
5. Start playing music on your device
6. ROCKit S automacally switches on/o when connected/disconnected to the charging case.
Manually power on/o by holding down the earbud buons for 10 seconds
How to pair ROCKit S earbuds with Bluetooth devices
1. Simply remove your ROCKit S earbuds from the charging case or long press the X buon on your
earbuds for 10 seconds. Aer the rst 5 seconds, you will hear the ON sound. Keep pressing the
buon for another 5 seconds to turn on pairing mode, indicated by ashing red and white LED
lights
2. Please keep the earbuds and Bluetooth device in range of 1 meter when pairing and make sure
ROCKit S is turned on
3. Go into the Bluetooth sengs on your device and search for new Bluetooth devices and select
ROCKit S
4. The LED light will blink white once ROCKit S is successfully paired
5. Long press X buon on the earbuds to turn o your ROCKit S earbuds
6. ROCKit S can remember 8 devices: You can pair 8 units with your ROCKit S, at 9th unit ROCKit S
will forget the rst connected
Operation instructions for use after first pairing
1. Aer rst me pairing your ROCKit S earbuds and Bluetooth device will automacally reconnect
2. Turn the earbuds on by holding down the X buon unl you hear the ON sound or by removing
the earbuds from the case
3. Long press X buon to turn o
7. ROCKit S will automacally pair with the last connected device.
8. To connect to a new device make sure that the previous connected device is disconnected
otherwise connecng opportunity won’t appear on the new device.
7
Basic functions of ROCKit S earbuds
Le earbud - funcon Le earbud - operaon on earbud
Volume down - 1 tap 1 tap
Previous song Hold for 2 seconds
Play/pause 2 taps
SIRI®/Google™ 3 taps
Answer/end call 2 taps
Right earbud - funcon Right earbud - operaon on earbud
Volume up 1 tap
Next song Hold for 2 seconds
Play/pause 2 taps
SIRI®/Google™ 3 taps
Answer/end call 2 taps
LED functions for ROCKit earbuds
When earbuds are charging in case
- LED funcon
Indicaon of LED funcon
Red blinks Earbuds are charging
LED o Earbuds are fully charged
When earbuds are in use - LED
funcon
Indicaon of LED funcon
White blinks Earbuds paired with a device
White/red blinks Pairing mode
3 red blinks each minute Earbuds needs charging
8
LED battery functions for ROCKit S case
When earbuds are charging in
case - LED funcon
Indicaon of LED funcon
1 blink 0-25% power on the case
2 blink 25-50% power on the case
3 blink 50-75% power on the case
4 blink 75-100% power on the case
LED o Fully charged earbuds
When case is charging by plug or
wireless - LED funcon
Indicaon of LED funcon
1 blink 0-25% power on the case
2 blink 25-50% power on the case
3 blink 50-75% power on the case
4 blink 75-100% power on the case
LED on Fully charged case
RESET ROCKIT S
A video tutorial of how to reset your ROCKit S earbuds can be found at SACKit’s YouTube channel:
https://bit.ly/34TWCjk
1. Before you reset make your device forget ROCKit S in Bluetooth sengs on your device
2. Turn Bluetooth OFF before reseng ROCKit S
3. Place both earbuds in the charging case
4. Take both earbuds out of the charging case
5. Follow bellow steps one earbud at a me
Click 5 mes quickly. When
you see a red ash, the
earbud has been reset. This
might require several aemps.
Click and hold
for 5 sec. unl
earbud ash red
and turns o.
Click and hold for
5 sec. unl earbud
ashes red and
white connuously.
6. When both earbuds are reset, put them back into the charging case and wait 10 sec. before ta-
king both earbuds up at the same me. The earbuds they will automacally pair with each other.
7. Now folllow “How to pair ROCKit S earbuds with Bluetooth devices” on page 6.
It did not work? Okay, rst and foremost: Do Not Panic! Your ROCKit S will work just ne if you
follow these steps:
• Has the LED on the earbud turned red? If the LED has not turned red the earbuds have not been
reset correctly. It is essenal that the 5 taps happens quickly, this may take a few tries.
• If the LED tuned red, it worked! Your earbuds have been reset. You now have to put them back
into the charging case for 10 seconds before they are ready to reconnect.
Reset ROCKit
Pairing mode Reset
Connects automatically
Click and hold
Power off
Click and hold
Power on
Click and hold
R
Click five times
TIPS: red and white LED
quickly flash alternately
TIPS: red and white LED slowly flash alternately
L
05
05
R
05
RR
L
05
L
L
03
03
After reset, L earbud will automatically
enter the pairing mode with red and white
LED, then the phone can search for earbuds.
ROCKit L
Select on phone
9
TROUBLESHOOTING
If you have trouble using your ROCKit S we ask you to try the following soluons. If these soluons
does not x your problem please contact our customer service at inf[email protected].
My ROCKit S earbuds are not connected to each other
• Try reseng your ROCKit S earbuds following the descripon on page 7. You can now reconnect
ROCKit S to your device by following the descripon found on 6
I experience issues with stability and connecon
• Try to delete the pairing between ROCKit S and your device on the device. You do this by
accessing the Bluetooth sengs on your device and choose “forget ROCKit S”. Now pair ROCKit
S and your device by following the descripon found on 6
ROCKit S is not playing music while connected to my device
• If ROCKit S is not playing music even though your device shows it should be, you have to
manually choose to play from ROCKit in your device sengs. Please refer to the instrucon of
your device or specic app for further informaon.
My ROCKit S does not turn o when placed in the charging case
• If ROCKit S earbuds do not turn o when placed in the charging case the case needs to be
charged. Please turn o the earbuds manually by pressing the touch buon on one of the earbuds
for 10 seconds and charge your ROCKit S case
My earbuds do not play with the same sound volume
• As ROCKit S is an in-ear headset they can be clocked with earwax and dirt. Try removing the
silicone ps from the earbuds and clean the small lter. Please follow the cleaning guide found on
page 10
• If it is not possible to clean the lter or this does not solve the problem, please contact our
customer service on [email protected]
My ROCKit S earbuds do not turn on when they are removed from the charging case
• Try placing the earbuds into the charging case and charge ROCKit S for minimum 2 hours before
using the earbuds
10
CLEANING OF THE PRODUCT
1. Kindly switch o ROCKit S before you clean it and remove the earbuds from the charging case.
The earbuds can manually be turned o by pressing the touch buon on one of the earbuds for
10 seconds.
2. Do not use any water, cleaner or chemicals to clean the earbuds
3. To clean the earbuds, remove the small silicone p and expose the black speaker fabric
4. Use a dry coon swab to gently clean the speaker fabric.
5. Use a so, dry, and lint-free cloth to wipe the enre earbud and charging case
6. Aer cleaning please place the earbuds back into the charging
NOTE: Avoid using sharp objects to clean ROCKit S earbuds and charging case
TECHNICAL SPECIFICATIONS
• Model: ROCKit S Earbuds
• IP grade: IPX5
• Bluetooth version: V5.0
• Bluetooth Soluon: Realtek
• Operang distance: 10M
• Baery: 590mAh charging case, 2 x 75mAh earbuds
• Charging me:
Earbuds: 1.5 hours
Charging case: 2 hours
• USB-C input: 5V/500mAh
• Music playing me: Up to 8 hours for earbuds without charging
20 hours of playing me added by the charging case
• Earbuds call me: Up to 6 hours
• Driver Unit: Ø6mm
• Frequency Range: 20Hz-20KHz
• Impedence: 16±15Ω at 1000Hz
• Size:
Earbud: 23.0*19.8*26.5 mm
Charging case: 67.7*45.5*31.3 mm
• Weight:
One earbud: 8.8 g
Charging case: 37.5g
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Auriculares de SACKit
SACKit
SACKit TOUCHit Manual de usuario
SACKit
SACKit Rock 250 Manual de usuario
SACKit
SACKit Touch 200 Manual de usuario
SACKit
SACKit Rock 350 Manual de usuario
SACKit
SACKit Speak 200 Manual de usuario
SACKit
SACKit Rock 100 Manual de usuario
SACKit
SACKit WOOFit Manual de usuario
SACKit
SACKit Rock 300 Manual de usuario
SACKit
SACKit TOUCHit Over-Ear Manual de usuario
SACKit
SACKit Touch 100 Manual de usuario
