Sachtler Video 25 Plus FB Manual de usuario
Video 25 Plus
Video 25 Plus FB
Manual
Benutzerinformation
© by sachtler®. Alle Rechte vorbehalten / All rights reserved
Version: 3.9/02/12
Ausgabedatum / Issue date: 02/12
Bestellnr. / Order no.: sko15t100a
Originalbetriebsanleitung/Original User Manual
sachtler®
Vitec Group Videocom Division
www.vitecgroup.com
Erfurter Strasse 16 Postfach / P.O.BOX 2039
D-85386 Eching D-85380 Eching
Germany Germany
Telefon: (+49) 89 321 58 200
Telefax: (+49) 89 321 58 227
E-Mail: [email protected]
Homepage: http://www.sachtler.com
We want you to receive Sachtler
products that are always state
of the art.
Therefore we reserve the right
to make changes based on
technical advances.
Wir wollen, dass Ihre Sachtler
Produkte immer auf dem
aktuellsten Stand sind.
Deswegen behalten wir uns
technische Änderungen vor.
- I -
Table of contents
Table of contents
1 Safety instructions ...............................................................1
2 Operating elements..............................................................1
3 Operation .............................................................................2
3.1 Levelling of the fluid head............................................2
3.2 Removing of the camera plate.....................................2
3.3 Mounting of the camera...............................................2
3.4 Removing of the camera..............................................3
3.5 Positioning of the camera............................................3
3.6 Adjusting the camera´s counterbalance ......................4
3.7 Setting of the damping ................................................5
3.8 Brakes ..........................................................................5
3.9 Support for viewfinder extension.................................5
3.10 Change of the batteries ...............................................5
3.11 Transport setting of damping, counterbalance
and brakes ...................................................................6
4 Technical specifications.......................................................7
4.1 General data ................................................................7
4.2 Dimensions ..................................................................8
5 The modular system ............................................................8
5.1 Conversion to include different balance plate.............9
5.2 Conversion of the Video 25 Plus to include
flat base .......................................................................9
6 Warranty.............................................................................10
Inhaltsverzeichnis
- II -
Inhaltsverzeichnis
1 Sicherheitshinweise............................................................11
2 Bedienelemente .................................................................11
3 Betrieb................................................................................12
3.1 Nivellieren des Fluidkopfes........................................12
3.2 Entnehmen der Kameraplatte....................................12
3.3 Einsetzen der Kamera................................................12
3.4 Entnehmen der Kamera .............................................13
3.5 Zentrieren des Kameragewichts ................................14
3.6 Einstellen der Kamerabalance ...................................15
3.7 Einstellen der Dämpfung............................................15
3.8 Bremsen.....................................................................15
3.9 Sucherlupenstütze .....................................................16
3.10 Austausch der Batterien ............................................16
3.11 Transportstellung von Dämpfung, Gewichtsaus-
gleich und Bremsen...................................................16
4 Technische Daten ..............................................................17
4.1 Allgemeine Daten.......................................................17
4.2 Abmessungen ............................................................18
5 Das Baukastensystem .......................................................18
5.1 Umbau des Fluidkopfes auf andere Balanceplatte ...19
5.2 Umbau des Video 25 Plus auf Flachboden...............19
6 Gewährleistung ..................................................................20
- III -
- IV -
1
2
3
54
67
11109876543210
Video 25 Plus:
V 25 Plus FB:
Tilt safety lock
- 1 -
Video 25 Plus / FB
Manual
Flange for view fin-
der extension
Vertical Setting of
fluid damping
Clamp for camera
balance plate
Battery holder
Counterbalance knob
Horizontal brake
Touch bubble level
(self illuminating)
Clamping screw
of the fluid head
Safety lock of Touch &
Go system
Horizontal setting
of fluid damping
1 Safety instructions
ÁWhen the camera is mounted, the clamping screw of the
fluid head must only be released if camera and tripod are
secured against falling over.
ÁWhen placing the camera plate into the fluid head, make
sure not to hold fingers within the range of the locking lever,
since it will snap back.
ÁWhen releasing the vertical brake make sure that the camera
is secured against any sudden movement.
ÁDo not operate the fluid head upside down without the
necessary securing devices, i.e. ropes etc.
2 Operating elements
Vertical brake
Lock of Touch
& Go system
Rosette for mounting
pan arm
Level for 1/2 counter-
balance springs
150 mm half ball,
2 pan bars,
brake in the front /
bubble in the back,
Touch & Go plate 16
same as Video 25
Plus, but only 1 pan
bar and Touch & Go
plate 35
Fluid Head Specifications
Manual
Video 25 Plus / FB
- 2 -
3 Operation
3.1 Levelling of the fluid head
(Video 25 Plus only)
The fluid head has a bubble to facilitate levelling.
Apply the vertical brake of the fluid head and hold the
camera with one hand. Open the clamping screw of the
fluid head and move the head in such a way, that the
bubble moves into the levels black circle. Tighten the
clamping screw firmly.
Touch Bubble
The fluid head has a self illuminating spirit bubble which
allows easy levelling even under unfavourable lighting con-
ditions.
The illumination is activated by strong tapping on the
bubble. Depending on the force applied the bubble will
glow up to 45 seconds.
3.2 Removing of the camera plate
The fluid head comes with a Touch & Go quick release
plate.
ÁHold the camera plate with one hand.
ÁGrasp the locking lever with your thumb and index and
pull down the red safety button.
ÁMove the locking lever as far as possible to the left
(audible clicking) and take out the camera plate.
3.3 Mounting of the camera
Attach the camera plate to the tripod adapter plate (came-
ra accessory) around the camera’s centre of gravity.
ÁTurn the counterbalance knob to position 7.
ÁApply horizontal brake and release vertical brake.
- 3 -
Video 25 Plus / FB
Manual
ÁThe springs of the counterbalance engage automatical-
ly by tilting the camera through the horizontal position
(audible clicking).
ÁLock the head with the tilt safety lock.
The blocking and clicking into position of the tilt safety
lock is achieved by pulling out the red knob and turning it
90°. Green marking on the red knob becomes visible.
Make sure that the tilt safety lock has engaged. (The head
can’t be tilted any more.)
ÁPut the front of the camera plate in place first.
ÁBy fitting the camera onto the head it will lock automa-
tically and the locking lever will snap back audibly into
its initial position.
3.4 Removing of the camera
ÁLock the head with the tilt safety lock.
The blocking and clicking into position of the tilt safety
lock is achieved by pulling out the red knob and turning it
90°. Green marking on the red knob becomes invisible.
Make sure that the tilt safety lock has engaged. (The head
can’t be tilted any more.)
ÁHold the camera with one hand.
ÁGrasp the locking lever with your thumb and index and
pull down the red safety button.
ÁMove the locking lever as far as possible to the left and
take out the camera plate.
3.5 Positioning of the camera
ÁHold the camera by securing the pan bar.
ÁApply horizontal brake and release vertical brake and
tilt safety lock by pulling out the red knob and turning it
90°. Green marking on the red knob becomes visible
(rocking the pan bars up and down will facilitate this).
Manual
Video 25 Plus / FB
- 4 -
ÁSelect 0 on the vertical drag adjustment ring.
ÁOpen the lock of sliding balance plate.
You have to push back red lever underneath the balance
plate as far as possible.
ÁBy moving the sliding balance plate forwards and
backwards you have to find the position where the
camera is balanced horizontally. Rear-heavy cameras
are moved to the front, front-heavy cameras are
moved to the back. You will find it easier when holding
the camera in a horizontal position.
ÁLock the sliding balance plate by pulling the red lever
into its initial position.
Caution: If you can’t manage to centre the camera, you
should move the camera plate to a different
position on the tripod mounting adapter.
3.6 Adjusting the camera´s counterbalance
ÁHold the camera by securing the pan bar.
ÁTurn the counterbalance knob to that number which
best compensates for the weight of the camera.
ÁAfter each spring is released, check if the camera will
remain in a tilted position, without moving upwards or
downwards significantly.
Please note: A lower counterbalance setting becomes
immediately effective in any tilt position. An
increase of the counterbalance setting will only
be effective in the horizontal position (springs
must click in audibly).
Tabla de contenidos
Idiomas:
Otros manuales de Accesorios para cámaras de Sachtler
Sachtler
Sachtler Video 90 Manual de usuario
Sachtler
Sachtler Adaptor Aktiv Slider S2080-0005 Manual de usuario
Sachtler
Sachtler CI Pedestal Manual de usuario
Sachtler
Sachtler SpeedLevel Clamp Manual de usuario
Sachtler
Sachtler Video 15 SB Manual de usuario
Sachtler
Sachtler 3171 Manual de usuario
Sachtler
Sachtler FSB 10 Manual de usuario
Sachtler
Sachtler Studio 9+9 Manual de usuario
Sachtler
Sachtler ENVARIO Ped 1-70 Pedestal Manual de usuario
Sachtler
Sachtler SOOM Instrucciones de operación
Sachtler
Sachtler Video 18 Dutch Manual de usuario
Sachtler
Sachtler 2-75 Manual de usuario
Sachtler
Sachtler Video 60 Plus Studio Manual de usuario
Sachtler
Sachtler DV 6 Manual de usuario
Sachtler
Sachtler S2080-0001 Manual de usuario
Sachtler
Sachtler C I Manual de usuario
Sachtler
Sachtler flowtech 75 Manual de usuario
Sachtler
Sachtler Ace Matte Box Manual de usuario
Sachtler
Sachtler TT 75/2 CF Manual de usuario
Sachtler
Sachtler Video 25 Plus Manual de usuario
