RUSTA 754900040101 Manual de usuario
Manual
ENG
Wildlife camera
Item no. 754900040101
2
ENG
CATALOGUE
Hazard, safety and warning notices……………………………………………………………..…..…..........…
1. About camera………………..……………………………………..............................…….............……………
1.1 Main features……………………………………………………….…………………....................................…
1.2 Computer system requirement……..……………………………….....................………….........…….
1.3 Picture presentations…………………………………………………………….........................….....…..…
1.4 Key function description……………………………………………...........................…………….........…
2. Start to use……………………………………………………………………..............................…….......……..
2.1 Installation of the SD card……………………………………………………….……………......................
2.2 Installation of battery………………………………………………………………...................................…
2.3 Use the adaptor…………………………………………………………..……….…………...............................
2.4 Connect to PC……………………………………………………………………………………...........................
2.5 Install the camera……………………………………………………………..………………...........................
3. Use the camera………………………………………………………………………..........................................
3.1 Power on, use and power o the camera……………………………………………….............……..
3.2 Photo mode interface…………………………………………….………………..….……............................
3.3 Video mode interface………………………………………………………………………..............................
4. Menu settings…………………………………………………………….……………............................………….
4.1 Mode …………………………………………………………………..…………………..............................….…..
4.2 PIR Interval …………………………………………………………………………............................…………..
4.3 PIR Sensitivity ……………………………………………………………………..........................……………..
4.4 Capture series ……………………………………………………………………….…..........................….……
4.5 Video Length ……………………………………………………………….………………..…............................
4.6 Video Resolution …………………………………………………………………………..........................….…
4.7 Photo Resolution………………………………………………………………………….........................………
4.8Stamp………………………………………………….………………………….……………...............................…
4.9 Date Format ………………………………………………………………………….............................………...
4.10 Temperature Unit…………………………………………….……………………..….……......................….
4.11 IR Brightness….……………………………………….....…………………………..……….……………….....…
4.12Language……………………………………….………………………….………………..………………..…..…....
4.13 System Time……………………………………………………………………………..…………………….….....
4.14 Time Lapse ……………………………………….………………………………………..…………………..…..…
4.15 Timer Setting………………………………..…………………………………………………..…………………....
4.16 Camera Name……………………………………………………….……………………………..…....………..…
4.17Password……………………………………………………………….…………………….…………………..........
4.18 Audio Recording…………………………………………………………...…………………...........................
4.19 Beep Sound………………………………….………………………………………...….…..............................
4
6
6
6
6
8
8
8
9
9
10
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
19
19
20
20
21
22
23
23
24
24
RIGHT OF COMPLAINT
By law the product must be returned to the place of purchase along with the original
receipt in the event of a complaint. The user is liable for any damage to the product that
is caused by not using the product for its intended purpose or by not following this user
manual correctly. The right of complaint will not apply in these instances.
INFORMATION ABOUT HAZARDOUS WASTE
Used products should be handled separately
from household waste. They should be taken
for recycling in accordance with local rules for
waste management.
3
4.20 Firmware………………………………………….………………………………………....…............................
4.21Default………...…………………………………..……………………………………………..............................
4.22Format……………………………………………………………………….………….…….................................
5. Playback mode ……..………………………………………………………………..………...............................
5.1 View file…...…………………………………..…………………….………………………..................................
5.2 Protect…………………………………………………………………..………………………................................
5.3 Unprotect File…………………………………………...………………………………………...........................
5.4 Protect All…………………………………………………………………………….……….…............................
5.5 Unprotect All…………………………………………………….……………..……………...............................
5.6 Delete One……………………………………………………………………….………..……..............................
5.7 Delete All……………………………………………………………………………………..…..............................
5.8 Exit………………………………………………………………………………..…….……..…................................
6. Appendixes …………………………………………………………………………..………..….............................
6.1 Common problems and solutions……………...……………………………………..…........................
6.2 Technical specification…………………………………………………………………..…..….......................
24
25
25
26
26
26
27
27
28
28
29
29
30
30
33
4
ENG
HAZARD, SAFETY AND WARNING NOTICES
HAZARDS FOR CHILDREN AND PERSONS WITH LIMITED ABILITY TO
OPERATE THIS CAMERA
• Never let children or persons with limited abilities operate this camera
or accessory. The camera and accessory can only be operated by per-
sons physically and mentally able to operate it safely.
POWER SUPPLY AND ELECTRICAL HAZARD
• If the camera is damaged or has foreign matter intrusion, please shut
down immediately and remove the batteries, otherwise there is fire or
explosion danger.
• Using an external power source may cause electric shock or fire.
Please keep the camera and power dry and ventilated, and forbid any
object to cover.
• The power supply can’t be used during thunder or lightning. Otherwise
it may cause electric shock or other accidents.
USE SAFETY WARNING
• Do not drop, impact, squeeze or puncture the camera.
Thank you for choosing to
purchase a product from Rusta!
Read through the entire manual
before installation and use!
Wildlife camera
Read the user manual carefully to make sure that the product is assembled, used and
maintained correctly, as described in the instructions in this user manual. Keep the user
manual for future reference.
WARNING!
If these instructions are not followed, an accident may
lead to serious personal injury or property damage.
5
• Never use corrosive chemicals to clean the camera.
• Keep away from high temperatures or combustibles. Do not put bat-
teries into the fire, which may cause fire or explosion.
• Never disassemble or repair the camera. If necessary, please contact
a professional or contact a dealer.
LCD SCREEN
• Do not squeeze or knock at the LCD screen
• If LCD screen broken, and accidently touch the liquid, rinse immediate-
ly with lots of clean water .In case of contact with eyes , rinse the eyes
with lots of clean water immediately and go to see doctor immediately.
In case of swallow the liquid, rinse the mouth with clean waters, drink
plenty of water and go to see doctor immediately.
USE, PROTECTION AND STORAGE
• Must place the camera on sturdy surfaces in case of any damage or
injury.
• Never use the camera upside down, or immerse the camera in water.
• All locks and plugs must be fastened before working.
• If you do not use the camera, must take out the batteries and place it in
a dry place
• Collision, fall and other man-made damage is out of the warranty ,
need to pay for repair.
WASTE DISPOSAL
• Cameras and accessories should not be disposed according to hous-
ehold waste, and should not be discarded at will.
• Please sort according to local laws. Please consult relevant local de-
partments for specific information.
ABOUT THIS MANUAL
• This manual serves as a general guide for the use of cameras. The
pictures are for reference only.
6
1. ABOUT CAMERA
Thank you for purchasing this HD camera with night vision. Please contact us timely if
you have any issues during the use of the camera.
1.1 MAIN FEATURES
The camera works automatically to take pictures of moving people or animals. Widely
used in animal shooting, hunting, family security and other applications. It has the fol-
lowing features:
• 1080P/30fps HD • 16.0MP photo resolution
• 0.6S trigger time • Long standby time
• Strong PIR sensitive distance • Time lapse
• Night vision function • Luminous keys
• Automatic work in 24hrs • IP66
• Covert appearance
1.2 COMPUTER SYSTEM REQUIREMENT
The camera can connect to computer to copy files, playback and used as U disk .If the
camera is connected to computer, the following specifications are required at least: The
Pentium2.0 GHZ or upper processor/Windows XP or upper system/2GB RAM/80GB or
more ROM/Standard USB2.0 port or upper port/1GB or more display card/1024x768 or
higher screen definition.
ENG
1.3 PICTURE PRESENTATIONS
Red indicating Light
FRONT VIEW BACK VIEW
Light sensor
Lens
IR lights window
IR lights window
PIR sensor
Buckle
7
Latch 1 DC-IN DC-IN
Tripod hole
Latch 2
RIGHT VIEW BACK VIEW
INSIDE VIEW
PIR sensor
Speaker
Display
USB port
Microphone
LED Indicator Light sensor
Lens
IR light
MENU key
UP key
DOWN key
OK key
MODE key
SD-card port
Slide Key
DC in
Key icon Key name Functions
[Slide] key OFF: Power o
TEST: Users can set, preview, test shot and play-back
photo and video.
ON: Monitor shooting mode. In this mode, the camera
enters the automatic monitoring and shooting state,
and automatically takes photos or videos.
[MENU] key Press this key, Menu interface will be shown or back
to previous step
[UP] key Move up/page up, photo or video forward
[DOWN] key Move down/page down, photo or video backward
[OK] key Confirm and execute
[MODE] key Switch between: Photo mode/Video mode/
Playback mode via pressing this key
8
ENG
1.4 KEY FUNCTION DESCRIPTION
2.1 INSTALLATION OF THE SD CARD
• This camera must use with a SD card, please format the SD card before first use of it.
See operation method 4.19.
• Please install SD card according to below steps:
As shown in the picture, open the latches and front housing; insert the SD card with
metal contactors facedown. Push the SD card to slot until a “click” is sounded which
means SD card installation is finished.
NOTICE: Do not take out the SD card when the camera is working, otherwise the SD
card might damage or lose data.
Please use qualified SD card and the transfer speed should be CLASS 4(included) or
above. Do not use poor quality SD card , otherwise the camera might not recognize it or
even can’t be powered on.
Open latches
Insert micro SD
card this way
9
2.2 INSTALLATION OF BATTERY
Use 4 or 8 pcs AA batteries to power on the camera, the following is installation method:
• As shown in the picture, open the latches of battery cover, then open battery cover.
• Install batteries according to the polarity sign on the latch. If only use 4 pcs batteries,
please install them in the left two holes.
• Keep the clean of battery cover, close it and then close the latches.
• Push the [Slide] key to “TEST” to check, if the screen is power on means the batteries
are installed correctly.
NOTICE: Please install batteries according to instruction, do not mix use of new and old
batteries. With only 4pcs AA batteries, the battery life will be shorter.
Incorrect batteries installation can’t power on the camera and may cause damage or
accident.
After installation, please close the latches firmly in case of dust or liquid infiltration.
2.3 USING AN ADAPTOR (ADAPTER NOT INCLUDED)
The camera also can be powered by adaptor as external power supply, see steps as
below:
• Install AA batteries, set all parameters, push the [Slide] key to “ON” mode, close the
housing of camera.
• Take down the waterproof rubber plug of DC IN port, insert the DC plug into the DC IN
port tightly.
• Insert the adaptor plug into the socket. After being detected, the camera will switch to
use the external power supply automatically.
Battery cover latch Please pay attention to the polarity of
the batteries for correct installation
Battery cover
10
ENG
NOTICE: Please use a standard adaptor that is marked output DC6V/2.0A.
ADAPTER NOT INCLUDED!
2.4 CONNECT TO PC
The camera can be connected to PC; users can transfer files, check photos and videos.
• Push the [Slide] key to “TEST” mode.
• As shown on below picture, use USB cable to connect camera and PC.
• After connection users will see ” ” on camera screen and “New disk driver” on PC
display. Then it can be operated as a normal U disk on PC.
NOTICE: When connecting to the computer, [Slide] key should be set to the ”TEST” posi-
tion. Ensure all cables are reliably connected.
If the computer configuration does not meet the requirements, it may not work pro-
perly when connecting the camera.
Insert the DC-IN cable
to this port
Tabla de contenidos
