Russound V-KP-1 Manual de usuario

Product Manual

V-KP-1

Amplied Keypad with Amazon Alexa Built-in

V-KP-1 WHATS IN THE BOXV-KP-1 WHATS IN THE BOX

What’s in the Box

1 Russound V-KP-1 Wall-Mounted

Wi-Fi Amplied Keypad with Amazon Alexa Built-In

1 Removable, Screw-Down 2-pin Power Connec-

tor (accepts up to 14AWG wire)

1 Removable, Screw-Down 4-pin Speaker Con-

nector (accepts up to 14AWG wire)

1 Color Change Faceplate (Black)

What you need for the Installation

1 Russound V-PS-2 Power Supply (sold separate-

ly, supports up to 2 V-KP-1 touchpads)

Flat mini-screwdriver for the speaker connectors

Flat Screwdriver for the Wallplate Mounting

#2 Philips Screwdriver for attaching the V-KP-1 to

the mounting box

Wire Strippers

V-KP-1 OVERVIEWV-KP-1 OVERVIEW

Mic Mute

Volume Up

Volume Down

Action

Status LED

Impedance

Switch

Power

Speaker

Connections

V-KP-1

Making the Connections

Note: All wiring connections must be made with

the system powered o and the V-PS-2 power

cord disconnected from the electrical mains

(unplugged from the wall outlet).

The V-KP-1 is very easy to install and only re-

quires two connections: power and loudspeakers.

Power is provided from the V-PS-2 power supply

and may be done locally or may be run using CL-2

rated cable up to 100 meters through the home

from a central location to the room where the

V-KP-1 is mounted.

The V-KP-1 is designed to be able to re-use any

existing wiring in a home in order to upgrade

existing legacy audio system components to a

modern, voice-controllable, multi-room audio

system.

The majority of existing installed audio systems

utilized a “home” run of speaker wires from some

central location to a volume control in each of the

rooms of the home. From those volume controls,

separate speaker wires would then be run within

the room to the left and right loudspeakers.

V-KP-1 CONNECTION AND SETUPV-KP-1 CONNECTION AND SETUP

If your system used this type of “Home” run

wiring, you can use two of those conductors to

carry the power from the V-PS-2 Power Supply to

the new V-KP-1. The V-KP-1 would be mounted in

the same location as the previous volume control

and the existing wires to the room’s loudspeakers

would be switched from the previous volume

control to the new V-KP-1.

The V-PS-2 includes important safety features

such as over-current, over-temperature and

short-circuit protection and can even indicate

trouble in an existing wiring configuration which

is especially critical when utilizing existing wiring

in a home to ensure a proper electrical connec-

tion.

V-KP-1 CONNECTION AND SETUPV-KP-1 CONNECTION AND SETUP

Connec t to V-KP-1

For a new installation, the location of the V-PS-2

power supply will be based on the wiring being

done in the room and around the home at any

other rooms. Each V-PS-2 can power up to 2

V-KP-1 wall-mounted amplifiers. Depending on

the wiring that will be done at the home, it might

be best to locate your power supplies in a central

wiring location for the entire home, or in a central

location for each floor or section of a home, or in

a wiring closet near adjacent rooms, for example.

Loudspeakers will always connect directly to the

V-KP-1 and typically those wires are run locally

within the room from the loudspeakers to the

wall-mounting location. CL2 rated wire must be

used when running wire within a home’s walls.

When connecting the speaker wires, be sure to

observe proper polarity. The positive and neg-

ative terminals on the V-KP-1 must correspond

with the positive and negative terminals at both

the left and right loudspeakers. This is also true

of the power connections between the V-PS-2

power supply and the V-KP-1

Strip ¼” (about 6mm) from each of the con-

ductors for both the left and right loudspeaker

connections and insert them into the removable

screw-down terminal, making sure to match the

proper polarity of each connection. Tighten the

screw-down connections securely and make

sure that there are no exposed strands that might

cause a short-circuit.

Once your speaker connections and power

connections have been made to the V-KP-1, you

are ready to make the same connections at the

V-PS-2 for the power connection.

With the V-PS-2 disconnected from electrical

power, strip ¼” (about 6mm) from each of the

conductors and insert them into the removable

screw-down terminal on the V-PS-2, making sure

to match the proper polarity of each connection.

V-KP-1 NEW INSTALLATIONV-KP-1 NEW INSTALLATION

Tighten the screw-down connections securely and

make sure that there are no exposed strands that

might cause a short-circuit.

Impedance Setting

The V-KP-1 supports both 4-ohm and 8-ohm

loudspeaker connections. There is a slider switch

at the rear of the V-KP-1 that can be set to either

4 or 8 ohms. The default is 8 ohms. If using the

V-KP-1 with a 4-ohm speaker load, set the switch

on the back to the 4-ohm position. The switch can

be adjusted at any time without needing to power

down the device or disconnect the speakers.

Once the connections have been made, connect

the V-PS-2 power supply to the electrical mains to

power up the system. You will see a green light on

the front of the V-PS-2 when it is plugged in.

The V-KP-1 status LED will blink on and o indi-

cating that the device is powered up and awaiting

Wi-Fi configuration.

Wi-Fi Configuration

When first powered up, the V-KP-1’s LED lights will

flash intermittently until the device is ready for use.

It will then announce “Connecting to network. This

will take from 1 to 3 minutes” and the Status LED

will begin to blink green.

It is now ready for connection to your Wi-Fi

network.

Your V-KP-1 Wi-Fi connection is configured with

the Russound VoicePlay App, available for down-

load from the App Store for iOS devices and from

the Google® Play Store for Android® devices. The

Russound VoicePlay App is also used to link the

V-KP-1 with your Amazon Account.

To connect to your Wi-Fi network and set up

your V-KP-1:

Open the VoicePlay app on your phone or tablet.

The app will search for any existing VoicePlay de-

vices. If this is your first VoicePlay device, tap on

V-KP-1 NEW INSTALLATIONV-KP-1 NEW INSTALLATION

“Add Device” at the bottom of the search screen

and follow the instructions within the app. The app

will connect your VoicePlay device to your Wi-Fi

network, will check for any available firmware

updates, will help you name the device for the

room that it is in, and will then guide you through

associating it with your Amazon account.

Using your V-KP-1 without an Amazon account

For the best possible experience, and to enable

voice control, we strongly recommend asso-

ciating your VoicePlay device with an Amazon

account. If you choose “Not Now” when asked

to associate your Amazon account, your V-KP-1

can still be used as a Bluetooth device, and for

casting audio such as Spotify Connect. The front

panel volume controls on the V-KP-1 will be fully

operable.

Enter your Amazon account information when

prompted.

Language Selection

After linking your Amazon account to your V-KP-

1, you will be prompted to select your preferred

language for use with Alexa. Select the appropri-

ate language for you to use for all of your voice

interactions with Alexa on the V-KP-1.

Other Settings

Once your V-KP-1 has been linked to your Ama-

zon account, you can access additional settings

using the Alexa app and selecting the V-KP-1

from the list of devices on your account

The Alexa app can also be used to select default

music services, select any music, and to join

rooms for synchronized multiroom music. Up to

10 VoicePlay devices can be synchronized in a

home.

V-KP-1 NEW INSTALLATIONV-KP-1 NEW INSTALLATION

Using the V-KP-1 with multiple loudspeakers

You can connect up to 2 pairs of 8 ohm speakers

to the V-KP-1. When doing this, make sure to

set the V-KP-1 impedance switch on the rear

of the device to 4 ohms. All speaker connec-

tions should be done in parallel, with both left

speakers’ positive (+) terminals being connected

to the V-KP-1 left + terminal and with both right

speakers’ negative (-) terminals being connected

to the V-KP-1’s right - terminal.

Adding additional amplification

If being used in a very large room, or where extra

amplification is needed, Russound oers several

models of amplifiers with a speaker-level input

that can be used with the V-KP-1.

V-KP-1 NEW INSTALLATIONV-KP-1 NEW INSTALLATION

First, make sure:

All devices are on the same Wi-Fi network.

Your Spotify app is installed and up-to-date on

your phone/tablet.

From your phone/tablet:

• Open Spotify and play something.

• Tap the Spotify Connect Device icon at the

bottom of the screen.

• Tap the V-KP-1 device you want to play to.

Microphone Mute -

Tap here to toggle between

Microphone Mute On and

Mute O

Volume Up -

Tap here to increase

the volume

Volume Down -

Tap here to decrease

the volume

Action -

Tap here for the Amazon

Alexa Action Button

V-KP-1 USING THE KEYPAD WITH SPOTIFY CONNECTV-KP-1 USING THE KEYPAD WITH SPOTIFY CONNECT

Otros manuales para V-KP-1

Tabla de contenidos

Otros manuales de Teclado de Russound

Russound

Russound CA 6.4 LRN Manual de usuario

Russound

Russound KP4 Manual de usuario

Russound

Russound KPL Manual de usuario

Russound

Russound KPSC Manual de usuario

Russound

Russound Sphere E Series Manual de usuario

Russound

Russound A-K3 Manual de usuario

Russound

Russound A-BUS A-KP2 Manual de usuario

Russound

Russound A-K3 Manual de usuario

Russound

Russound CA-LCD Manual de usuario

Russound

Russound IPK-1 Manual de usuario

Russound

Russound UNO-S2 Manual de usuario

Russound

Russound UNO-S2 Manual de usuario

Russound

Russound UNO-S1 Manual de usuario

Russound

Russound MDK-C5 Manual de funcionamiento

Russound

Russound UNO-S2 Manual de usuario

Russound

Russound MDK-C6 Manual de usuario

Russound

Russound A-K4 Manual de usuario

Russound

Russound KPSC Manual de usuario

Russound

Russound Sphere E Series Manual de usuario

Russound

Russound V-KP-1 Manual de usuario

Russound

Russound ST2-KP Manual de usuario

Russound

Russound ISK1 Manual de usuario

Russound

Russound KP4-KP6 Manual de usuario

Russound

Russound CA-LCD2 Manual de usuario

Manuales populares de Teclado de otras marcas

BFT

BFT SELETTO Manual de usuario

Micro Id

Micro Id MP7G3BL Manual de instrucciones

WindowMaster

WindowMaster WLI 130 Manual de usuario

ACT

ACT ACT PRO 1030 Manual de usuario

Cardin

Cardin SSB Series Manual de usuario

Harman Kardon

Harman Kardon KP 1 Manual de usuario

Chamberlain

Chamberlain KPR2000 Guía del usuario

CYP

CYP CR-KP1 Manual de usuario

Aeware

Aeware k-35 Series Guía de referencia

Aritech

Aritech CS-175 Series Manual de usuario

GE NetworX NX-1600E Series Manual de usuario

Lenze AC Tech

Lenze AC Tech MC SERIES Manual de usuario

Burg Wächter

Burg Wächter secuENTRY 7711 Manual de usuario

Aeware

Aeware in.k450 Manual de usuario

Lenze

Lenze EPM-H410 Manual de usuario

Toshiba

Toshiba RKP007Z Manual de usuario

Gemini

Gemini GEM-DXK1 KEYPAD Manual de usuario

Bosch

Bosch D1260 Series Manual de usuario