Russell Hobbs RHECOI Guía

WARRANTY AND INSTRUCTION

RHECOI

RUSSELL HOBBS STEAM, SPRAY, DRY IRON

Congratulations on purchasing our Russell Hobbs Steam, Spray, Dry Iron. Each unit is

manufactured to ensure safety and reliability. Before using this appliance for the first time,

please read the instruction manual carefully and keep it for future reference.

FEATURES OF THE RUSSELL HOBBS STEAM, SPRAY, DRY IRON

•1100W

•Dry, steam, spray ironing

•Pioneering UV Light Steam technology

•Automatic thermo-temperature control system

•Anodized Aluminum soleplate

•Automatic anti-scale function

•Auto-Shut off

•Overheat safety protection circuit

•Anti-Drip feature

•With indicator light

•Audible alarm

•Vertical Steam feature

•360° Swivel cord

•Soft grip handle

•300ml Water tank capacity

•Handy long 1.9m power cord

•For domestic use only

•2 Year warranty, 1 year retail warranty with proof of purchase. The warranty is

extended for a further period of 1 year, on condition that the purchaser registers the

product on the Russel Hobbs website, within 12 months from the date of purchase

of the product.

IMPORTANT SAFEGUARDS

When using any electrical appliance, basic safety precautions should always be followed

including the following:

1. Please read the instructions carefully before using any appliance.

2. Always ensure that the voltage on the rating label corresponds to the mains voltage

in your home.

3. Incorrect operation and improper use can damage the appliance and cause injury to

the user.

4. The appliance is intended for household use only. Commercial use invalids the

warranty and the supplier cannot be held responsible for injury or damage caused

when using the appliance for any other purpose than that intended.

5. Avoid any contact with moving parts.

6. This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction concerning use of the

appliance by a person responsible for their safety.

7. Children should be supervised to ensure that they do not play with the appliance.

8. Check the power cord and plug regularly for any damage. If the cord or the plug is

damaged, it must be replaced by the manufacturer or a qualified person in order to

avoid an electrical hazard.

9. Do not use the appliance if it leaks, has been dropped or damaged in any way. In

case of damage, take the unit in for examination and/or repair by an authorised

service agent

10.To reduce the risk of electric shock, do not immerse or expose the motor/ electrical

assembly, plug or the power cord to water or any other liquid.

11.Never immerse the unit in water or any other liquid for cleaning purposes.

12.Remove the plug from the socket by gripping the plug. Do not pull on the cord to

disconnect the appliance from the mains. Always unplug the unit when not in use,

before cleaning or when adding or removing parts.

13.The use of accessory attachments that are not recommended or supplied by the

manufacturer may result in injuries, fire or electric shock.

14.A short cord is provided to reduce the hazards resulting from becoming entangled in

or tripping over a longer cord.

15.Do not let the cord hang over the edge of a table or counter. Ensure that the cord is

not in a position where it can be pulled on inadvertently.

16.Do not allow the cord to touch hot surfaces and do not place on or near flammable

goods, near an open flame, hot gas or electric burner or a heated oven.

17.Use of an extension cord with this appliance is not recommended. However, if it is

necessary to use an extension lead, ensure that the lead is suited to the power

consumption of the appliance to avoid overheating of the extension cord, appliance

or plug point. Do not place the extension cord in a position where it can be pulled on

by children or animals or tripped over.

18.This appliance is not suitable for outdoor use. Do not use this appliance for anything

other than its intended use.

19.DO NOT carry the appliance by the power cord.

20.Always operate the appliance on a smooth, even, stable surface. Do not place the

unit on a hot surface.

21.Ensure that the switch is in the “0” or “OFF” position after each use.

22.Don’t iron clothing while it’s being worn – you’ll burn or scald the wearer.

23.Don’t touch the soleplate and keep away from the steam emitting from it.

24.Take care when emptying the iron –it may contain hot water.

25.Don’t use the iron in the vicinity of children.

26.Use the iron on a stable, level, heat-resistant surface, preferably an ironing board.

27.Don’t leave the iron unattended while plugged in, or while it’s standing on the

ironing board. It could be knocked over by you, by a child or by a pet.

28.Don’t fill the iron directly from the tap, use the water beaker provided.

29.Don’t fill past the MAX level mark shown on the water tank or water leak from the

iron during use.

30.Deposits or minerals in the water supply will generate scale and block the steam

holes in the soleplate. It is advisable to use distilled water when filling your iron. Do

not use chemically distilled water.

31.Leave the iron upright to cool down fully before cleaning and storing away.

32.Don’t use the iron for any purpose other than those described in these instructions.

33.Take care not to scratch the soleplate –avoid buttons, zips, etc.

34.When placing the iron on its heel rest, ensure that the surface on which is has been

placed is clean and stable.

35.The iron has a protective thermal fuse, which will blow if it overheats. If this

happens, the iron will stop working and must be returned for repair.

36.Always unwind and straighten the power cord before use.

37.Unplug the iron from the mains electrical supply before:

•Cleaning

•Filling with water or emptying the water tank

•Immediately after use

•When not in use

•When moving

38.The appliance generates high temperature steam. Always handle with care and

warn other users of potential danger.

39.Don’t let the power cord touch the soleplate as it may result in damage as well as a

potential fire hazard.

40.Empty the water tank after each use.

41.Do not add perfume, vinegar or other chemical liquids into the water tank as they

may result in damage to the appliance.

42.Do not operate this appliance by means of an external timer.

43.The manufacturer does not accept responsibility for any damage or injury caused

by improper or incorrect use, or for repairs carried out by unauthorised personnel.

44.In case of technical problems, switch off the appliance and do not attempt to repair

it yourself. Return the appliance to an authorised service facility for examination,

adjustment or repair. Always insist on the use of original spare parts. Failure to

comply with the above mentioned pre-cautions and instructions, could affect the

safe operation of this appliance.

45.Ultraviolet ray radiation from iron’s UV lamp may be harmful to our eyes and skin.

Please don’t disassemble and repair the iron in the case of technical problems.

Switch off the appliance and do not attempt to repair it yourself. Return the

appliance to an authorised service facility for examination, adjustment or repair.

Always insist on the use of original spare parts. Failure to comply with the above

mentioned pre-cautions and instructions, could affect the safe operation of this

appliance

1. Water inlet cover

2. Temperature indicator ring

3. Steam level light

4. Steam setting button

5. Soleplate

6. Water tank

7. Steam trigger

8. UV decorative light

OPERATING INSTRUCTIONS

Steam Level

Functions

Cloth

Strong Steam / Dry Ironing

Linen, Cotton, Wool, Silk,

Synthetics, Polyester,

Acetate, Acrylic, Polyamide,

Nylon

Soft Steam / Dry Ironing

Dry Ironing

Silk Synthetics, Polyester,

Acetate, Acrylic, Polyamide,

Nylon

Standby Function

BEFORE FIRST USE

Remove any protective films or stickers from the soleplate and the Iron’s body. Wipe the

soleplate with a dry soft cloth. Unwind and straighten the power cord. Fill the iron as

described in the section “How to Fill the Water Tank”. Connect the appliance to a

suitable mains power supply outlet. Turn the Temperature Dial to the “ ” position; the

pilot light will glow to indicate that the iron is heating up. Once the pilot light goes off, then

the required temperature is reached. Begin first time ironing with an old towel. When the

water tank is empty and there is no more steam that can be produced; the preparation

work is completed. The iron is now ready for proper use.

Note: It is normal for small amount of smoke to be produced the first time you use the

iron, this will quickly disappear. When using the steam function for the first time, do not

direct the steam towards the laundry, as there could be debris from the steam vents.

HINTS AND TIPS FOR IRONING

1. Sort the articles to be ironed according to the type of fabric. This will minimize the

frequency of temperature adjustment for different garments.

2. Start ironing the fabrics requiring the lowest temperature and progress to the higher

ones because the iron heats up quicker than it cools down.

3. “Test iron” a small area on the backside or inside of the garment if you are unsure

about the type of fabric. Start with a low temperature and increase gradually.

4. Wait for about three (3) minutes before ironing heat sensitive fabrics. ‘Temperature

adjustment’ will need a certain time to reach the required level no matter if it is

higher or lower.

5. Delicate fabrics such as silk, wool, velour, etc. are best ironed with an ironing cloth

to prevent shine marks.

6. You may need to press the steam button a few times to activate the burst of steam

function.

7. Always keep the soleplate smooth –avoid contact with sharp, hard, metal objects.

READ THE GARMENT LABELS AND FOLLOW THE MANUFACTURER’S IRONING

INSTRUCTIONS THAT ARE OFTEN SHOWN BY SYMBOLS SIMILAR TO THE

FOLLOWING:

Symbol

Fabric

Temp.

Variable

steam

Steam

Burst

Spraying

water

NOTE: If the fabric consists of various kinds of fabrics, always select the temperature

required by the most delicate fabrics.

HOW TO FILL THE WATER TANK

1. Disconnect the appliance from main power supply outlet.

2. Open the water inlet cover.

3. Place the iron in its horizontal position with the soleplate facing down.

4. Fill water through the water-filling inlet hole up to the MAX level mark indicated on

the side of the iron/ water tank. Never fill above this mark.

5. Close the water inlet cover and wipe off any spillages on Iron.

6. When the water level reaches a low level or is empty, the alarm will give out a

sound to indicate refilling is necessary. In this case, the user must stop using the

iron and repeat steps 1 to 5 above in “HOW TO FILL THE WATER TANK” before

continuing to iron.

Note: For the best result, it is advisable to use de-mineralized water or distilled water. Do

not use chemically de-scaled water or any other liquids.

MAX

Synthetic

fibres/Silk

Wool

Cotton

Linen

Note: the symbol means:"This article cannot be ironed!”

DRY IRONING

This function irons without the use of steam.

1. Connect the iron with a suitable mains power supply outlet.

2. The iron indicator light must be on “ ’’ when starting up the iron

3. The UV light will light up and the temperature indicator ring light will be flashing to

indicate the iron has just been started up and is in the heating up process

4. When the temperature indicator ring light is steady, it means the iron has reached

the temperature setting.

5. Set the iron level to “ ”

6. If you need a higher temperature, set he level to “ ” and don’t press the steam

trigger. Ironing can take place when the temperature is stable.

7. The steam trigger needs to be pressed regularly during ironing to prevent the iron

from shutting off automatically. (Refer to “Auto Shut-off function”

8. After use, press the steam setting button to the “ ”position to switch off.

9. Disconnect the iron from mains power supply outlet.

10.Follow cleaning and maintenance instructions.

NOTE: The iron will make some soft noises and vibrations during usage, which is

normal.

STEAM IRONING

This function can only be used at a higher ironing temperature

1. Before each use, it is recommended to clean the steam channels of the iron. This

can be done by pressing the steam trigger for more than 20 seconds before usage.

2. Connect the iron with a suitable mains power supply outlet.

3. The iron indicator light must be on “ ’’ when starting up the iron

4. Set the steam setting button to “ ”.

5. The UV light will light up and the temperature indicator ring light will be flashing to

indicate the iron has just been started up and is in the heating up process

6. When the temperature indicator ring light is steady, it means the iron has reached

the temperature setting.

7. Choose the steam level by pressing the steam setting button.

8. Garments can be ironed when the temperature is stable

9. The temperature indicator ring light will flash from time to time during ironing, as the

iron is automatically adjusting the thermostat.

10.After use, press the steam setting button to the “ ”position to switch off.

11.Disconnect the iron from mains power supply outlet.

12.Follow cleaning and maintenance instructions.

Note: This iron has an anti-drip feature: if you are ironing garments for long periods of time,

the soleplate temperature may decrease. The anti-drip function will ensure that water

does not leak from the soleplate during this time.

In the case where it is difficult to remove stubborn wrinkles, a damp cloth covering the

garment is recommendable to aid the ironing process.

BURST OF STEAM IN VERTICAL POSITION

Burst of steam can also be applied when holding the iron in a

vertical position. This function is useful for removing wrinkles

on garments in hanging position, hanging curtains, or other

hanging fabrics.

By setting the steam level to “ ” and waiting for the

indicator light to be steady, will allow ironing in the vertical

steam position.

Note: It may be necessary to press the burst of steam button few times to start this

function. During the use of ‘Burst of Steam’, stop ironing when the pilot light turns on and

then start ironing again only after the pilot light has turned off.

Warning: Do not apply steam on any clothes or fabrics that are being worn by human or

pets. The temperature of the steam is very high and will burn or scald.

Tabla de contenidos

Otros manuales de Hierro de Russell Hobbs

Russell Hobbs

Russell Hobbs Supreme Steam Cordless 23300-56 Manual de usuario

Russell Hobbs

Russell Hobbs Steam Iron Manual de usuario

Russell Hobbs

Russell Hobbs Easy Store Manual de usuario

Russell Hobbs

Russell Hobbs 25910 Manual de usuario

Russell Hobbs

Russell Hobbs Light and Easy Brights Rose Manual de usuario

Russell Hobbs

Russell Hobbs RHI2000 Guía

Russell Hobbs

Russell Hobbs 21530 Manual de usuario

Russell Hobbs

Russell Hobbs 14773 Manual de usuario

Russell Hobbs

Russell Hobbs RHC300 Guía de instalación

Russell Hobbs

Russell Hobbs Easy Store Pro Plug & Wind Manual de usuario

Russell Hobbs

Russell Hobbs 20630 Manual de usuario

Russell Hobbs

Russell Hobbs POWERSTEAM ULTRA COPPER RHC560 Guía de instalación

Russell Hobbs

Russell Hobbs Easy Store Manual de usuario

Russell Hobbs

Russell Hobbs 24460-56 Manual de usuario

Russell Hobbs

Russell Hobbs RHC950 Manual de usuario

Russell Hobbs

Russell Hobbs 26020-56 Manual de usuario

Russell Hobbs

Russell Hobbs 20630-56 Manual de usuario

Russell Hobbs

Russell Hobbs Autosteam Ultra Manual de usuario

Russell Hobbs

Russell Hobbs EASY Manual de usuario

Russell Hobbs

Russell Hobbs RHC280 Guía de instalación

Russell Hobbs

Russell Hobbs RHI 102 Guía de instalación

Russell Hobbs

Russell Hobbs RHI392 Guía

Russell Hobbs

Russell Hobbs 24430-56 Manual de usuario

Russell Hobbs

Russell Hobbs 26470-56 Manual de usuario

Manuales populares de Hierro de otras marcas

Clatronic

Clatronic DB 3703 Manual de usuario

TEFAL

TEFAL FV4093Z0 Manual de usuario

Gorenje

Gorenje SIH 2200 BS Manual de usuario

Philips

Philips GC6012 Manual de usuario

Bosch

Bosch 2 Series Manual de usuario

Riffel

Riffel Catena KB-819 Manual de usuario

Texi

Texi Hestia Manual de usuario

Maxwell

Maxwell MW-3010 Manual de usuario

TREVIDEA

TREVIDEA Girmi ST60 Manual de usuario

Philips

Philips HI5914/30 Manual de usuario

Primula

Primula Vapormat Manual de usuario

Magio

Magio MG-541 Manual de usuario

Scarlett

Scarlett SC-1334S Manual de usuario

Bosch

Bosch Sensixx B22L Manual de usuario

Philips

Philips GC651 Manual de usuario

Vitek

Vitek VT-1247 VT Manual de usuario

Cleanmaxx

Cleanmaxx 3397 Manual de usuario

Philips

Philips GC800 Manual de usuario