Rukra RK-2022 Manual de usuario
RUKRA PHONE LINE SWITCH_ENG
ARTICLE NUMBER: RK-2022
Read this anual carefully before you start with installation or progra ing
RUKRA EUROPE B.V. WWW.RUKRA.EU INFO@RUKRA.EU
GENERAL
RUKRA Phone Line Switch is connected between the telephone line and maximum of 3 RUKRA
Elevator Phone’s parallel connected only two wires).
The RUKRA Phone line Switch is made to make a call from the machineroom to 3 RUKRA Elevator
Phones and you can make a call from the 3 RUKRA Elevator Phones to the machineroom.
It is also possible to program the connected 3 RUKRA Elevator Phone’s
CONNECTIONS
FUNCTIONS
The RUKRA Phone Line Switch works with connected RUKRA Elevator Phones, they must have some
programmable parameters. RUKRA Phone Line Switch can be used to connect one Elevator Phone
single mode) or for 2 or 3 parallel connected Elevator Phones parallel mode).
Single ode:
In this mode, only two important parameters: disable parallel connection and call duration. These
two parameters must be set in the RUKRA Phone Line Switch as well as in the Elevator Phone. It is
also necessary for the correct function to set the same character prolongation call duration and code
for hanging Elevator Phone.
Indication: Green LED 1 flashes, green button does not respond.
Function: After picking up the handset of the telephone the telephone starts to call and then the
RUKRA Elevator Phone picks up the line. Normal call progress. Whenever is allotted time to expire
maximum call duration, so RUKRA Phone Line Switch automatically dial the prolongation character. If
you hang up the phone the Elevator Phone will send hanging code.
Manual
RUKRA Phone line Switch
Article number: RK-2022
2
Parallel ode:
In this mode it is necessary to set the same parameters in the RUKRA Phone Line Switch and the
connected Elevator Phones. Without this, you cannot synchronize operation. These are the
parameters: 42 Character prolongation
43 Hang-up code
45 Activate parallel mode
46 Number of RUKRA Elevator Phone if parallel connected)
4 * Constant time detection
51 Maximum call duration
Indication: Green LEDs light, green button switch address where do will be called. Switches in the
order 1 / 2 / 3 / 1+2 / 1+2+3.
Function: Select the address by green button) where do will be called. After picking up handset of
the telephone is disconnected telephone line begins to ring and parallel connected Elevator Phones
gradually pick up and RUKRA Phone Line Switch selects the desired Elevator Phone. Normal call
progress. Whenever is allotted time to expire maximum call duration, so RUKRA Phone Line Switch
automatically dial the prolongation character. If you hang up the phone, so to the communicator will
send hanging code.
Red button:
Red switch enables the possibility to connect your phone in the machine room with external line.
This is mainly for safety reasons, to call for help ambulance, fire brigade). If the switch is closed, so
the external line is connected directly to the phone and the Elevator Phones in the elevator are not
working.
Manual
RUKRA Phone line Switch
Article number: RK-2022
3
CALL FROM CABINE
For call use not blocked BTN1. (Alar button on/below cabin)
This Button has three function:
1) Emergency call – press BTN1 longer than time parameter 52 2sec)
2) End of alarm – press BTN1 longer than time parameter 52) x 8 16sec)
3) Call to the machine room – three times press button BTN1 explain in picture)
Picture explain how pressed button for successful call to the machine room.
PROGRAMMING
RUKRA Phone Line Switch is possible programming only from PC with program RUKRA Elevatorphone
Setting. Connector for PC has only 4 pins and we need use reduction between 4 pins connector and
standard 10 pins programming connector. Programming is easy, in program RUKRA Elevatorphone
Setting we have settings for connected Elevator Phones and now we connect RUKRA Phone Line
Switch, and write these parameters without changes) to the RUKRA Phone Line Switch, so this is all.
These settings we recommended to save to the PC for next other possible future servicing.
Parameters affected thereby: 42 Character prolongation
43 Hang-up code
45 Activate parallel mode
46 Number of RUKRA Elevator Phone if parallel connected)
4 * Constant time detection
51 Maximum call duration
TECHNICALL
Power : 12 – 24 VDC
Consumption : Stand-by 40mA
Active 300 mA at 12V and 150 mA at 24V
Programming : Only by PC and program “RUKRA Elevator Setting”
Sizes : 21 x 99 x 66mm
Environment temperature : -30 to 85° Celsius
CE : The CE symbol indicates that the product complies with the
European directives.
On our website you can download the declaration of conformity.
Warranty : 2 year Carry in
RUKRA EUROPE B.V. WWW.RUKRA.EU INFO@RUKRA.EU TEL: +31 33 711 39 34
Tabla de contenidos
