Ruijie Networks RG-S2628G-E Manual de instalación y funcionamiento

RG-S2600E Series Switch

Hardware Installation and Reference Guide V1.31

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,

transmission, translation or commercial use of this document or any portion of this document, in any form or by any means,

without the prior written consent of Ruijie Networks is prohibited.

, , , , ,

, ,, ,

, , are registered trademarks of Ruijie Networks.

Counterfeit is strictly prohibited.

Exemption Statement

This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain

the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will

not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Thank you for using our products. This manual will guide you through the installation of the device.

This manual describes the functional and physical features and provides the device installation steps, hardware

troubleshooting, module technical specifications, and specifications and usage guidelines for cables and connectors.

Audience

It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it

is assumed that the users are already familiar with the related terms and concepts.

Obtaining Technical Assistance

Ruijie Networks website: http://www.ruijienetworks.com/

Online customer services: http://webchat.ruijie.com.cn

Customer service center: http://www.ruijie.com.cn/service.aspx

Customer services hotline: +86-4008-111-000

BBS:

http://support.ruijie.com.cn

Customer services email: Consulting@ruijienetworks.com

Related Documents

Documents Description

Configuration Guide Describes network protocols and related mechanisms that supported by the

product, with configuration examples.

Command Reference Describes the related configuration commands, including command modes,

parameter descriptions, usage guides, and related examples.

Symbol Conventions

Means reader take note. Notes contain helpful suggestions or references.

Means reader be careful. In this situation, you might do something that could result in equipment damage

or loss of data.

Product Overview

RG-S2600E switch series is applied at the access layers of small- and medium-sized networks to provide line-speed

switching and complete QoS services and ensure the undelayed transmission of key data by applying different traffic

classification rules to different services. RG-S2600E switch series provides flexible medium interfaces and meets the

connection requirements of different media in network constructions.

Table 1-1 RG-S2600E Switch Series

Model 10/100Base-T

Ethernet Port

10/100/1000Base-T

Ethernet Port

1000Base-X

SFP Port

Console

Port

Extension

Module

Slot

RG-S2628G-E 24 2 2 1 1

RG-S2652G-E 48 2 2 1 1

RG-S2628G-P V1.XX 24 2 2 1 1

RG-S2628G-P V2.XX 24 None 4 1 None

RG-S2652G-P 48 2 2 1 1

RG-S2628G-E

Specifications

Model RG-S2628G-E

Module Type FE-SFP-LX-MM1310

FE-SFP-LH15-SM1310

Mini-GBIC-SX

Mini-GBIC-LX

Mini-GBIC-LH40

Mini-GBIC-ZX50

Mini-GBIC-ZX80

Mini-GBIC-ZX100

Mini-GBIC-GT

The supported module type may change at any time. For the detailed change

information, consult Ruijie Networks.

Extension Module M3000E-02SFP/GT

M3000E-STACK

SFP Port 100Base-X

1000Base-X

RPS Type Not supported

Power Supply AC input:

Rated voltage range: 100–240 VAC

Maximum voltage range: 90–264 VAC

Frequency: 50–60 Hz

Rated current: 2 A

HVDC input:

Maximum voltage range: 192 to 290 VDC

Rated current: 0.3 to 0.17 A

PoE Not supported

Max, Power

Consumption

With extension modules: 27W;

Without extension modules: 23W

Temperature Operating temperature: 0ºC to 50ºC;

Storage temperature: -40ºC to 70ºC

Humidity Operating humidity: 10% to 90% RH;

Storage humidity: 5% to 90% RH

Fan Fanless

Temperature

Warning Support

EMC Standards GB9254-2008 Class A

Safety Standards GB4943-2001

Dimensions

(W x H x D) 440 mm x 44 mm x 260 mm

Weight With extension modules: 4.4 kg

Without extension modules: 3.9 kg

Product Appearance

The front panel of the RG-S2628G-E switch provides twenty-four 10/100Base-T Ethernet ports, two gigabit SFP fiber

optic/copper combo ports and one console port. The back panel provides AC power input ports and one extension module

slot.

Figure 1-1 Appearance of the RG-S2628G-E Switch

Front Panel

Figure 1-2 Front Panel of the RG-S2628G-E Switch

Note:

1. Switch status indicator

2. Extension module indicator

3. Extension port 1 status indicator

4. Extension port 2 status indicator

5. Console port

6. 10/100Base-T adaptive Ethernet

port

7. 10/100Base-T adaptive Ethernet port indicator

8. 10/100/1000Base-T adaptive Ethernet port

9. 100/1000Base-X SFP port

10. 10/100/1000Base-T adaptive Ethernet port indicator

11. 100/1000Base-X SFP port indicator

Back Panel

Figure 1-3 Back Panel of the RG-S2628G-E Switch

Note: 1. Grounding pole

2. 3-core AC power interface

3. Cable plug retention clip

4. Extension module slot

Power Supply System

RG--S2628G-E powered either with AC power or DC power.

AC input:

Rated voltage range: 100–240 VAC

Maximum voltage range: 90–264 VAC

Frequency: 50–60 Hz

Rated current: 2 A

The power cable requirement: 10 A power cable

HVDC input:

Maximum voltage range: 192 V to 290 V

Rated current: 0.3 A to 0.17 A

Power cord: 10A power cable

Heat Dissipation System

The RG-S2628G-E is designed with no fans. To ensure good dissipation, sufficient ventilation space (10 cm distance from

both sides and the back panel of the device) should be reserved to avoid blocking the air intake of the device; otherwise,

the dissipation might be affected. Dust the device every three months to avoid blocking the ventilation openings.

LED Indicators

Indicator Panel

Identification

Status Meaning

Off The switch is NOT receiving power.

Blinking green Initialization is in progress. Continuous blinking

indicates errors.

Solid green The switch is operational.

Solid yellow The switch gets a temperature warning. Check

the operating environment of the switch.

Status indicator Status

Solid red The switch is faulty.

Off The module is not connected or installed.

Extension module

indicator

Module Solid green The module is operational.

Off The port is NOT connected.

Solid green The port is connected at 1000Mbps.

Blinking green The port is transmitting or receiving data at

1000Mbps.

Solid yellow The port is connected at 100/10Mbps.

Extension module port

indicator

for the M3000E-02SFP/GT

Blinking yellow The port is transmitting or receiving data at

100/10Mbps.

Off The stack port is NOT connected.

Solid green The stack port is connected.

Extension module port

indicator

For the M3000E-STACK

A/B

Blinking green The stack port is transmitting or receiving data.

Off The port is NOT connected.

Solid green The port is connected at 100Mbps.

Blinking green The port is transmitting or receiving data at

100Mbps.

Solid yellow The port is connected at 10Mbps

10/100Mbps RJ-45 port

indicator 1~24

Blinking yellow The port is transmitting or receiving data at

10Mbps.

Off The port is NOT connected.

Solid green The port is connected at 1000Mbps.

Blinking green The port is transmitting or receiving data at

1000Mbps.

Solid yellow The port is connected at 100Mbps.

1000Mbps SFP port

indicator 25F, 26F

Blinking yellow The port is transmitting or receiving data at

100Mbps.

Off The port is NOT connected.

1000Mbps RJ-45 port

25, 26

Solid green The port is connected at 1000Mbps.

Indicator Panel

Identification

Status Meaning

Blinking green The port is transmitting or receiving data at

1000Mbps.

Solid yellow The port is connected at 100/10Mbps.

indicator

Blinking yellow The port is transmitting or receiving data at

100/10Mbps.

RG-S2652G-E

Specifications

Model RG-S2652G-E

Module Type FE-SFP-LX-MM1310

FE-SFP-LH15-SM1310

Mini-GBIC-SX

Mini-GBIC-LX

Mini-GBIC-LH40

Mini-GBIC-ZX50

Mini-GBIC-ZX80

Mini-GBIC-ZX100

Mini-GBIC-GT

The supported module type may change at any time. For the detailed change

information, consult Ruijie Networks.

Extension Module

Type

M3000E-02SFP/GT

M3000E-STACK

SFP Port 100Base-X

1000Base-X

RPS Type Not supported

Power Supply AC input:

Rated voltage range: 100–240 VAC

Maximum voltage range: 90–264 VAC

Frequency: 50–60 Hz

Rated current: 2 A

PoE Not supported

Max. Power

Consumption

With extension modules: 38W;

Without extension modules: 34W

Temperature Operating temperature: 0ºC to 50ºC;

Storage temperature: -40ºC to 70ºC

Humidity Operating humidity: 10% to 90% RH;

Storage humidity: 5% to 90% RH

Fan Support adjustment of fan speed and warning of fan troubles.

Temperature

Warning Support

EMC Standards GB9254-2008 Class A

Safety Standards GB4943-2001

Dimensions

(W x H x D) 440 mm x 44 mm x 300 mm

Weight With extension modules: 4.9 kg;

Without extension modules: 4.4 kg

Product Appearance

The front panel of the RG-S2652G-E switch provides forty-eight 10/100Base-T Ethernet ports, two gigabit SFP fiber

optic/copper combo ports and one console port. The back panel provides AC power input ports and one extension module

slot.

Figure 1-4 Appearance of the RG-S2652G-E Switch

Front Panel

Figure 1-5 Front Panel of the RG-S2652G-E Switch

Note:

1. Switch status indicator

2. Extension module indicator

3. Extension port 1 status indicator

4. Extension port 2 status indicator

5. Console port

6. 10/100Base-T adaptive Ethernet

port

7. 10/100Base-T adaptive Ethernet port indicator

8. 10/100/1000Base-T adaptive Ethernet port

9. 100/1000Base-X SFP port

10. 10/100Base-T adaptive Ethernet port indicator

11. 100/1000Base-X SFP port indicator

Back Panel

Figure 1-6 Back Panel of the RG-S2652G-E Switch

Note:

1. Grounding pole

2. 3-core AC power

interface

3. Cable plug retention

clip

4. Fan outlet

5. Extension module slot

Power Supply System

RG-S2652G-E adopts the AC power input.

AC input:

Rated voltage range: 100–240 VAC

Maximum voltage range: 90–264 VAC

Frequency: 50–60 Hz

Rated current: 2 A

The power cable requirement: 10 A power cable

Heat Dissipation System

The RG-S2652G-E adopts turbine fans for heat dissipation purposes, thereby ensuring the device to function normally in

the specified environment. At least 10 cm distance space should be reserved around both sides and the back panel of the

cabinet to allow air circulation. Dust the device every three months to avoid blocking the ventilation openings.

Figure 1-7 Flow Scheme of Heat Dissipation

LED Indicators

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Ruijie Networks

Ruijie Networks

Ruijie Networks RG-S12000 Series Manual de usuario

Ruijie Networks

Ruijie Networks RG-S2910C-XS-P Series Manual de instalación y funcionamiento

Ruijie Networks

Ruijie Networks RG-S8605E Manual de instalación y funcionamiento

Ruijie Networks

Ruijie Networks RG-ES126S Manual de usuario

Ruijie Networks

Ruijie Networks RG-S6930-2C Manual de instalación y funcionamiento

Ruijie Networks

Ruijie Networks RG-S6200 Series Manual de usuario

Ruijie Networks

Ruijie Networks XS-S1960-24GT4SFP-H Manual de instalación y funcionamiento

Ruijie Networks

Ruijie Networks RG-S6220 Series Manual de usuario

Ruijie Networks

Ruijie Networks RG-IS2700G Series Manual de usuario

Ruijie Networks

Ruijie Networks RG-S7800C Series Manual de usuario

Ruijie Networks

Ruijie Networks RG-N18014 Manual de instalación y funcionamiento

Ruijie Networks

Ruijie Networks RG-S2910C-24GT2XS-P-E Manual de instalación y funcionamiento

Ruijie Networks

Ruijie Networks RG-S6220-48XS4QXSV1 Manual de instalación y funcionamiento

Ruijie Networks

Ruijie Networks RG-S2628G-I Manual de instalación y funcionamiento

Ruijie Networks

Ruijie Networks RG-ES05 Manual de instalación y funcionamiento

Ruijie Networks

Ruijie Networks RG-S12006 Manual de instalación y funcionamiento

Ruijie Networks

Ruijie Networks RG-S7808C Series Manual de usuario

Ruijie Networks

Ruijie Networks RG-S2600E Series Manual de instrucciones

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario