Rugged CCTV Stainless steel dome camera Manual de usuario

Features

䯲1/3" 520K/610K Sony Exview HAD CCD II

Minimum Resolution 0.1 Lux (F1.2, 50 IRE).

S/N Ratio 52dB.

䯲High Resolution 680 TV Lines

This camera has realized high resolution of 680 TV lines using the top-notch full digital image

processing, 12 Bit A/D serial signal processing and special algorithm technologies.

䯲DNR (Digital Noise Reduction)

The DNR technology eliminates noise thus generating a distinct and clear image.

䯲DAY&NIGHT (Output the Filter changing signal)

This camera has the DayNight function which outputs the filter changing signal with detecting the

illumination condition.

Day&Night operation feature an ‘auto’ mode which switches between day and night mode

automatically based upon the level of illumination on the scene.

点EXT mode changes between day and night operation upon triggering from an external source.

And also, the COLOR mode operates in daytime conditions to provide optimum colors, and B/W mode

operates in night-time conditions to enhance the definition of the image.

点marks represent the factory default function. (EXT2)

䯲OSD (On Screen Display)

This camera supports the OSD function which is used with multi language. And so, the camera

can be controlled bye selecting text displayed on the monitor screen.

䯲SMART IR

This camera function is to recognize things under low illumination by controlling IR intensity of

radiation and AE in accordance with changes of camera surrounding.

General Specifications & Functions

Specifications

Items Sub-items NTSC PAL

CCD

Device SONY 1/3" CCD SONY 1/3" CCD

Total 1020(H) X 596(V) 1020(H) X 596(V)

Effective 976(H) X 494(V) 976(H) X 582(V)

Sync

Inter. H/V 15,734/59.94Hz 15,625/50Hz

LL H/V 15,750/60Hz 15,625/50Hz

Performance

Horizontal / Verical Resolution 680 TV Lines

Minimum illumination (F1.2) Color : 0.1 Lux(50IRE) / 0.02 Lux(15IRE)

B/W : 0.08Lux(50IRE) / 0.002 Lux(15IRE)

S/N Ratio 52dB

Functions

OSD English/ Japaness / German / French / Russian

Portuguess / Spanish / Chinese

Day & Night Sofware

ATW 1800~10500K

High Speed Shutter 1/60(1/50) ~ 1/10Ksec

ATR(adaptive tone reproduction) Off/ON(Luminance(L,M,H),Contrast(L,ML,M,MH,H))

AGC Level Setting

AUTO iris DC Auto Iris

MANUAL iris Off/On (Level Setting)

Camera ID Off/On (Letters A to Z, Numerals 0 to 9, Symbols)

White Balance ATW/PUSH/USER1/USER2/ANTI CR/MANUAL/PUSH LOCK

DNR Off/2D(Y 0-15)

Gamma(r) 0.45

Color Gain Control Level Setting

Motion Detection 4 Area (On/Off, Position, Sensitivity)

Privacy Mask 8 Area (On/Off, Color, Position)

Etc. Function Sharpness, Reverse (H)

In/Output

Power Input DC+12V±10%

Video Output VBS 1.0V p-p (75ohm Terminated)

Alarm Output Open Collector / Normal: Open Active:0V (Ground)

Power Consumption 400mA

Operating Temperature Absolute : -10ȋC ~ +50ȋC

Operating Humidity Less than 90%

Dimension 126(L)X116(H)X126(W)mm

OSD Menu tree

Main Menu Sub

Menu Descriptions

LENS

AUTO DC Auto Iris, speed level

MANUAL Manual Iris

SHUTTER/AGC

AUTO Auto Iris, Shut + Auto iris, Brightness, AGC on/off, AGC brightness

MANUAL Shut + AGC , shutter(1/50,1/60 ~1/10k), AGC

WHITE BAL

ATW Speed, Delay time, Frame size, Environment (in/outdoor)

PUSH All pull-in

USER1 Outdoor fixed gain

USER2 Fluorescent light fixed gain

ANTI CR Color rolling suppressing

MANUAL R gain, B gain setting

PUSH LOCK Hold

BACK LIGHT

OFF Off

BLC Back light compensation

HLC High light compensation

PICT ADJUST Image mirror, Adjust brightness, Adjust contrast, Adjust sharpness,

Adjust HUE, Adjust GAIN

ATR ON Luminance (L,M,H), Contrast (L,ML,M,MH,H)

OFF OFF

MOTION DET

OFF OFF

ON Detect sense, block display, monitor area, area sel.

PRIVACY

ON Area sel(1-8), color(1-8), transparency(0-1),Mosaic on/off

OFF OFF

DAY/NIGHT

AUTO Burst off/on, delay time, day to night, night to day

COLOR Color Mode

B/W Black & White Mode , Burst off/on, IR Optimizer on/off

EXT1 External Input 1

EXT2 External Input 1

DNR DNR Mode(Y), Level(0 - 15)

CAMERA ID

OFF Camera ID OFF

ON Camera ID ON

SYNC

INT Line Lock OFF

LL Line Lock ON (phase 0 - 524(624)

LANGUAGE Select Language

CAMERA RESET Set Camera Default

SAVE ALL All the settings of the internal OSD MENU are saved

OSD Menu Functions

䯲Main Menu

●LENS

The function is used to set the mechanical iris of the lens.

●SHUTTER/AGC

This function is used to set AE or ME.

●WHITE BAL

This function is used to set the white balance operation made.

●BACKLIGHT

This function is used to set the back-light compensation operation.

●PICT ADJUST

The function is used to set the image adjustment items (mirror, brightness, contrast, sharpness, hue, gain)

●AT R

The function is used to set the ATR (adaptive tone reproduction) operation.

Unlike the wide dynamic range (WD) function for two exposed images-one with a long-time exposure

and one with a short-time exposure-the ATR function provides gradation compensation for one image

shot over one exposure time.

The WD function makes it possible to obtain the optimum image by setting and controlling the AE reference

level independently for two images, one with a long-time exposure and one with a short-time exposure.

No effect in improving the visibility of the images using the ATR function will be achieved in cases where,

as a result of overexposure or other forms of saturation, the contrast information of the images has been

lost at the point when the signals are input to the ATR processing block.

For this reason, the AE reference level must be set depending on whether importance is to be placed on

visibility in the low-luminance areas or in the high-luminance areas.

SETUP MENU

LENS AUTO↵

SHUTTER/AGC AUTO↵

WHITE BAL ATW↵

BACKLIGHT OFF

PICT ADJUST ↵

ATR OFF

MOTION DET OFF

NEXT↵

EXIT↵SAVE ALL

●MOTINON DET

The function is used to set the motion detection operation.

●PRIVACY

The function is used to set up to eight privacy masks.

●DAY/NIGHT

The function is used to set the Day/Night function.

●NR

The function is used to set the noise reduction.

●CAMERA ID

The function is used to set the camera ID.

●SYNC

The function is used to display the current synchronization mode.

●LANGUAGE

The function is used to select the language in which to display the internal OSD men.

●CAMERA RESET

The function initializes all the internal OSD menu settings together.

●SAVE ALL

The function is used to save the various settings of the internal OSD menu in the EEPROM together.

KEY FUNCTIONS:

SETUP MENU

PRIVACY OFF

DAY/NIGHT AUTO↵

NR ATW↵

CAMERA ID OFF

SYNC INT

LANGUAGE ENGLISH

CAMERA RESET

BACK↵

EXIT↵SAVE ALL

▲: Up

▼: Down

 : Left

 : Right

○:Enter(Setup)

●LENS “" "ඖ” This function can adjust the intensity of radiation incoming to the camera.

Use the IIGIඔIGIඖIGI○IGswitch to select a menu item.

FUNCTION OPTION DESCRIPTION

LENS

AUTO

MANUAL

SHUTFIX + M IRIS , SHUT + M IRIS

SHUT

■AUTO IRIS (AE) ↵

FUNCTION OPTION DESCRIPTION

TYPE DC "" ""

VIDEO ""

DC servo

VIDEO servo (Not Used)

MODE AUTO "" ""

CLOSE ""

OPEN ""

The mechanical iris is controller automatically

The mechanical iris is fixed to close

The mechanical iris is fixed to open

SPEED 0~255 "" "" Sets the convergence speed of the mechanical iris.

■MANUAL(ME)

AUTO IRIS

TYPE DC

MODE AUTO

SPEED IIIIIȗIIIIII 080

RETURN↵

SETUP MENU

LENS MANUAL↵

SHUTTER/AGC AUTO↵

WHITE BAL ATW↵

BACKLIGHT OFF

PICT ADJUST ↵

ATR OFF

MOTION DET OFF

NEXT↵

EXIT↵SAVE ALL

●SHUTTER/AGC “" "ඖ”

FUNCTION OPTION DESCRIPTION

SHUTTER/AGC AUTO

MANUAL

Sets AE

Sets ME

■AUTO SETUP ↵

FUNCTION OPTION DESCRIPTION

HIGH

LUMINANCE

MODE

AUTO IRIS "" ""

SHUT+ AUTO IRIS ""

SHUTFIX + MIRIS

SHUT + MIRIS

Specifies AE control on the medium and high

brightness side

BRIGHTNESS 0~255 "" "" Specifies the high and medium brightness side

reference

LOW

LUMINANC

MODE OFF "" "”

AGC ""

Specifies AE control on the low-brightness

side

BRIGHTNESS

X0.25 "" "”

X0.50 "”

X0.75 "”

X1.00 "”

Specifies the low brightness side reference

■MANUAL SETUP The ME settings are selected on this screen.

FUNCTION OPTION DESCRIPTION

MODE SHUT + AGC "SHUT + AGC" is the only option available for

the ME operation mode.

There are no other options

SHUTTER 1/60(1/50),1/100(1/120),1/2

50,1/500,1/1K,1/2K,1/4K,1/10K

Sets the ME shutter speed

AGC 6.00,12.00,18.00,24.00,30.

00,36.00,42.00,44.80

Sets the AGC value [dB] for ME

MANUAL SETUP

MODE SHUT+AGC

SHUTTER 1/60

AGC 6.00

RETURN↵

AUTO SETUP

HIGH LUMINANCE

MODE AUTO IRIS

BRIGHTNESS IIIIIȗIIIIII 024

LOW LUMINANCE

MODE AGC

BRIGHTNESS X0.50

RETURN↵

●WHITE BAL “" "ඖ”

White balance can be set to ATW, PUSH, USER1, USER2, ANTI CR, MANUAL or PUSH LOCK.

ATW (Auto Tracking White balance) and PUSH (Full pull-in) are continuously monitoring/analyzing the color temperature of the

incoming light and correcting the white balance.

ATW limits the color temperature range at about 2,500˚K~8,500˚K to reduce the excessive compensation for the big object which

has a single color. PUSH has no limits between about 1,800˚K~10,500˚K but it may over-compensate the white balance for

the big object which has a single color. In cases where it goes under 2,500˚K such as halogen light, ATW may stop. If so,

PUSH mode is recommended. USER1 and USER2 are a fixed white balance which is user-programmable by R-GAIN and B-

GAIN and useful only for the steady light. ANTI CR (Anti Color Rolling) can reduce color rolling under the fluorescent light

when the camera operates in shutter control without an auto iris lens. (NTSC version only)

FUNCTION OPTION DESCRIPTION

WHITE BAL

ATW Auto trace white balance

PUSH All pull-in

USER1 Outdoor fixed gain

USER2 Fluorescent light fixed gain

ANTI CR Color rolling suppression. (NTSC version only)

MANUAL Manual white balance

PUSH LOCK Hold

■AT W

FUNCTION OPTION DESCRIPTION

SPEED 0~ 255 "" "" Adjusts the pull-in speed ATW

DELAY CNT 0~ 255 "" "" Sets the time-based hysteresis of ATW

ATW FRAME

X0.50

X1.00

X1.50

X2.00

"" "”

""

Sets the pull-in frame magnification

ENVIRONMENT Indoor

Outdoor

"" "”

"”

Sets the pull-in frame(indoor/outdoor)of ATW

ATW

SPEED IIIIIIIIIIȗŊŊI 245

DELAY CNT IȗIIIIIIIIIIII 003

ATW FRAME X2.00

ENVIRONMENT INDOOR

RETURN↵

■USER1 WB

FUNCTION OPTION DESCRIPTION

B-GAIN 000 - 255 Used for operating the B gain in the WB fixed gain mode

R-GAIN 000 - 255 Used for operating the R gain in the WB fixed gain mode

■USER2 WB

FUNCTION OPTION DESCRIPTION

B-GAIN 000 - 255 Used for operating the B gain in the WB fixed gain mode

R-GAIN 000 - 255 Used for operating the R gain in the WB fixed gain mode

●MANUAL

FUNCTION OPTION DESCRIPTION

LEVEL 000 - 255 Sets the B and R gain values for manual WB

910

USER1

B-GAIN IIIIIIIIIIȗIII 045

R-GAIN IȗIIIIIIIIIIII 026

RETURN↵

USER2

B-GAIN IIIIIIIIIIȗIll 045

R-GAIN IȗIIIIIIIIIIII 026

RETURN↵

MANUAL WB

LEVEL IIIIIIIIIIȗIll 045

RETURN↵

Tabla de contenidos

Otros manuales de Cámara de seguridad de Rugged CCTV

Rugged CCTV

Rugged CCTV Night Ranger Manual de usuario

Rugged CCTV

Rugged CCTV TagShot III-27' Manual de usuario

Rugged CCTV

Rugged CCTV Night Scout TVI Manual de usuario

Rugged CCTV

Rugged CCTV PATC-G4028 Manual de usuario

Rugged CCTV

Rugged CCTV SCOUT III Manual de usuario

Rugged CCTV

Rugged CCTV Sentry-700 Manual de usuario

Rugged CCTV

Rugged CCTV PLATINUM 622 Manual de usuario

Rugged CCTV

Rugged CCTV RB358 Manual de usuario

Rugged CCTV

Rugged CCTV Vanguard-700 Manual de usuario

Rugged CCTV

Rugged CCTV Ruff Ride Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario

Rugged CCTV stainless steel dome camera Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas