Ruckus Wireless SmartCell Gateway 200 Manual de usuario

Ruckus Wireless™

SmartCell Gateway™200

Getting Started Guide for

Release 1.1.2 (GA)

Part Number 800-70508-001 Rev C

Published October 2013

www.ruckuswireless.com

SmartCell Gateway 200 Getting Started Guide for Release 1.1.2 (GA), 800-70508-001 Rev C ii

No part of this documentation may be reproduced, transmitted, or translated, in any form or by any means, electronic,

mechanical, manual, optical, or otherwise, without prior written permission of Ruckus Wireless, Inc. (“Ruckus”), or as

expressly provided by under license from Ruckus.

Destination Control Statement

Technical data contained in this publication may be subject to the export control laws of the United States of America.

Disclosure to nationals of other countries contrary to United States law is prohibited. It is the reader’s responsibility to

determine the applicable regulations and to comply with them.

Disclaimer

THIS DOCUMENTATION AND ALL INFORMATION CONTAINED HEREIN (“MATERIAL”) IS PROVIDED FOR GENERAL

INFORMATION PURPOSES ONLY. RUCKUS AND ITS LICENSORS MAKE NO WARRANTY OF ANY KIND, EXPRESS

OR IMPLIED, WITH REGARD TO THE MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

OF MERCHANTABILITY, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE

MATERIAL IS ERROR-FREE, ACCURATE OR RELIABLE. RUCKUS RESERVES THE RIGHT TO MAKE CHANGES OR

UPDATES TO THE MATERIAL AT ANY TIME.

Limitation of Liability

IN NO EVENT SHALL RUCKUS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUEN-

TIAL DAMAGES, OR DAMAGES FOR LOSS OF PROFITS, REVENUE, DATA OR USE, INCURRED BY YOU OR ANY

THIRD PARTY, WHETHER IN AN ACTION IN CONTRACT OR TORT, ARISING FROM YOUR ACCESS TO, OR USE

OF, THE MATERIAL.

Trademarks

Ruckus Wireless, Ruckus, the bark logo, ZoneFlex, FlexMaster, ZoneDirector, SmartMesh, Channelfly, Smartcell,

Dynamic PSK, and Simply Better Wireless are trademarks of Ruckus Wireless, Inc. in the United States and other

countries. All other product or company names may be trademarks of their respective owners.

SmartCell Gateway 200 Getting Started Guide for Release 1.1.2 (GA), 800-70508-001 Rev C iii

Contents

About This Guide

Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

Documentation Feedback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vii

1 Preparing to Set Up the SmartCell Gateway 200

Unpacking the SCG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Rack Mount Kit Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Prepare the Required Hardware and Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Get to Know the Physical Features of the SCG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2 Mounting and Powering the SCG

Mounting the SCG onto a Server Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

What You Will Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Step 1: Unpack the Rack Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Step 2: Separate the Slide Rails into the Inner and Outer Parts . . . . . . . . . . . . . . . . . . . . 17

Step 3: Install the Outer Rail Slides to the Rack Posts. . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Step 4: Fasten the Shoulder Screws to the Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Step 5: Install the Inner Rails on the Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Step 6: Fasten the Inner Rails to the Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Step 7: Attach the Mounting Ears to the Rail Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . 22

Step 8: Slide the Rail Assembly into the Outer Rails and Secure to the Rack . . . . . . . . . 22

Powering On the SCG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Using AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Using DC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

3 Preparing the Interface Settings and Administrative Computer

Preparing the SCG Interface Settings to Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Preparing the Administrative Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

iv Ruckus Wireless, Inc.

4 Running the Setup Wizard and Logging On to the Web Interface

Running the SCG Setup Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Step 1: Start the Setup Wizard and Set the Language . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Step 2: Configure the Management IP Address Settings. . . . . . . . . . . . . . . . . . . . . . . . . 37

Step 3: Configure the DataPlane IP Address Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Step 4: Configure the Cluster Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

If This SCG Is Forming a New Cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

If This SCG Is Joining an Existing Cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Step 5: Verify the Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Connecting the SCG to the Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Supported SFP+ Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Logging On to the Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

5 Configuring the SCG for the First Time

Configuring AP Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Configuring AAA Servers and Hotspot Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Adding an AAA Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Creating a Hotspot Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Creating a Registration Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Configure Rule Priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Defining the WLAN Settings of AP Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

General Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

WLAN Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Authentication Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Encryption Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Configuring DHCP Option 43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Verifying That Wireless Clients Can Associate with a Managed AP . . . . . . . . . . . . . . . . . 74

What to Do Next . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Index

SmartCell Gateway 200 Getting Started Guide for Release 1.1.2 (GA), 800-70508-001 Rev C v

About This Guide

This SmartCell Gateway™ 200 Getting Started Guide provides information on how

to set up the Ruckus Wireless™ SmartCell Gateway 200 (SCG) appliance on the

network. Topics covered in this guide include mounting, installation, and basic

configuration.

This guide is intended for use by those responsible for installing and setting up

network equipment. Consequently, it assumes a basic working knowledge of local

area networking, wireless networking, and wireless devices.

NOTE: If release notes are shipped with your product and the information there

differs from the information in this guide, follow the instructions in the release notes.

Most user guides and release notes are available in Adobe Acrobat Reader Portable

Document Format (PDF) or HTML on the Ruckus Wireless Support Web site at

https://support.ruckuswireless.com/documents.

Document Conventions

vi Ruckus Wireless, Inc.

Document Conventions

Tab l e 1 and Table 2 list the text and notice conventions that are used throughout

this guide.

Related Documentation

In addition to this Getting Started Guide, each SmartCell Gateway 200 documen-

tation set includes the following:

•Administrator Guide: Provides detailed information on how to configure the SCG.

The Administrator Guide is available for download on the Ruckus Wireless

Support Web site at http://support.ruckuswireless.com.

•Online Help: Provides instructions for performing tasks using the SCG Web

interface. The online help is accessible from the Web interface and is searchable.

•Release Notes: Provide information about the current software release, including

new features, enhancements, and known issues.

Table 1. Text conventions

Convention Description Example

monospace Represents information as it

appears on screen

[Device name]>

monospace bold Represents information that

you enter

[Device name]> set

ipaddr 10.0.0.12

default font bold Keyboard keys, software

buttons, and field names

On the Start menu, click All

Programs.

italics Screen or page names Click Advanced Settings.

The Advanced Settings page

appears.

Table 2. Notice conventions

Notice Type Description

Information Information that describes important features or instructions

Caution Information that alerts you to potential loss of data or potential

damage to an application, system, or device

Warning Information that alerts you to potential personal injury

Documentation Feedback

SmartCell Gateway 200 Getting Started Guide for Release 1.1.2 (GA), 800-70508-001 Rev C vii

Documentation Feedback

Ruckus Wireless is interested in improving its documentation and welcomes your

comments and suggestions. You can email your comments to Ruckus Wireless at:

[email protected]

When contacting us, please include the following information:

• Document title

• Document part number (on the cover page)

• Page number (if appropriate)

For example:

• Ruckus Wireless SmartCell Gateway 200 Getting Started Guide (Release 1.1.2)

• Part number: 800-70508-001

• Page 88

Documentation Feedback

viii Ruckus Wireless, Inc.

SmartCell Gateway 200 Getting Started Guide for Release 1.1.2 (GA), 800-70508-001 Rev C 1

Preparing to Set Up the

SmartCell Gateway 200

In this chapter:

•Unpacking the SCG

•Package Contents

•Before You Begin

Unpacking the SCG

2Ruckus Wireless, Inc.

Unpacking the SCG

WARNING! The SCG appliance is heavy (40 lbs/18.14kg). Two people should work

together to unpack the SCG. Ruckus Wireless strongly recommends against one

person attempting to perform this task alone.

Follow these steps to unpack the SCG appliance.

1Open the SCG package, and then carefully remove the contents.

2Return all packing materials to the shipping box, and put the box away in a dry

location.

3Verify that all of the items listed in Package Contents (below) are included in the

package. Check each item for damage. If any item is damaged or missing, notify

your authorized Ruckus Wireless sales representative.

Package Contents

A complete SCG package contains all of the items listed below:

• One SCG appliance with two AC/DC power supply units

• One console cable (use only this cable to connect the front or rear serial port to

another device)

• One rack mount kit (see Rack Mount Kit Contents below)

• Service Level Agreement / Limited Warranty Statement

• Regulatory statement sheet

•ThisGetting Started Guide

NOTE: The AC power cable (part number 902-0174-XX00, where XX is the two-

character country code) is not supplied with the SCG appliance and may be ordered

separately.

Otros manuales para SmartCell Gateway 200

Tabla de contenidos

Otros manuales de Puerta de Ruckus Wireless

Ruckus Wireless

Ruckus Wireless MediaFlex 7211 Manual de usuario

Ruckus Wireless

Ruckus Wireless MediaFlex MF7211 Manual de usuario

Ruckus Wireless

Ruckus Wireless SmartCell Gateway 200 Manual de usuario

Ruckus Wireless

Ruckus Wireless SmartCell Gateway 200 Manual de usuario

Ruckus Wireless

Ruckus Wireless SmartCell Gateway 200 Manual de usuario

Ruckus Wireless

Ruckus Wireless ZoneDirector ZD1100 Guía de inicio rápido

Ruckus Wireless

Ruckus Wireless MM2211 Manual de usuario

Ruckus Wireless

Ruckus Wireless Virtual SmartZone High Scale Manual de usuario

Ruckus Wireless

Ruckus Wireless MetroFlex MF2201 Manual de usuario

Ruckus Wireless

Ruckus Wireless SCG-200 Manual de usuario

Ruckus Wireless

Ruckus Wireless Virtual SmartZone Manual de servicio

Ruckus Wireless

Ruckus Wireless Metro Broadband Gateway Manual de usuario

Ruckus Wireless

Ruckus Wireless MediaFlex 7211 Manual de usuario

Ruckus Wireless

Ruckus Wireless SmartCell Gateway 200 Manual de usuario

Ruckus Wireless

Ruckus Wireless ZoneDirector 1100 Manual de usuario

Ruckus Wireless

Ruckus Wireless ZoneFlex P300 Manual de usuario

Ruckus Wireless

Ruckus Wireless SmartCell Gateway 200 Manual de usuario

Ruckus Wireless

Ruckus Wireless Metro Broadband Gateway Manual de usuario

Ruckus Wireless

Ruckus Wireless SmartCell Gateway 200 Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario