Rosewill RNX-N1/N1MAC Manual de usuario

Quick Installation Guide

Wireless Adapter RNX-N1/N1MAC

Quick Installation Guide

Wireless Adapter RNX-N1/N1MAC

The high-speed wireless USB 2.0 client adapter is the most convenient way to let you put a

desktop/notebook computer almost anywhere without the hassle of running network cables.

Now you don’t need to suffer from drilling holes and exposed cables. Once you are connected,

you can do anything, just like the wired network. This USB client adapter operates seamlessly

in 2.4GHz frequency spectrum supporting the 802.11b, 802.11g, and 802.11nwireless

standards. It’s the best way to add wireless capability to your existing wired network or simply

surf the web.

For advanced configuration, refer to the User’s Manual in the CD-ROM provided.

USB Adapter Description

USB Connector

The USB adapter is a standard USB

adapter that fits into any USB interface.

The USB adapter has two LED indicators

and a built-in antenna.

PWR and LINK

LED Indicator

USB Adapter for Windows 2000/XP/Vista– Installation

During the installation, Vista may need to copy systems files from its installation CD. Therefore,

you may need a copy of the Windows installation CD at hand before installing the drivers.

Follow the steps below in order to install the USB adapter drivers:

1. Insert the CD-ROM that was provided to you in this package. The setup should run

automatically. If the setup does not run automatically, then you must manually select the

setup.exe file from the CD-ROM drive.

2. Once the setup begins you will see the InstallShield Wizard. Select Rosewill

Configuration Tool and then click on the Next> button.

Quick Installation Guide

Wireless Adapter RNX-N1/N1MAC

3. Click on the Install button to begin the installation.

4. The installation is complete. Click on the Finish button.

5. Carefully insert the USB adapter into the USB port. Windows will then detect and

install the new hardware.

6. An Ricon will then appear in the system tray. Right click on the Ricon and then click on

Launch Config Utilities.

Quick Installation Guide

Wireless Adapter RNX-N1/N1MAC

Note: Click on Use Zero Configuration as Configuration Utility if you would like to use

Windows Zero Config.

USB Adapter Adding a Profile – Windows 2000/XP/Vista

The Profile tab is used to store the settings of multiple Access Points such as home,

office, café, etc. When adding a profile you are required to enter a profile name and

SSID as well as configure the power-saving mode, network type, RTS/fragmentation

threshold and encryption/authentication settings.

Quick Installation Guide

Wireless Adapter RNX-N1/N1MAC

1. Profile: Enter a name for the profile; this does not need to be the same as the

SSID.

2. SSID: Enter the SSID of the network or select one from the drop-down list.

3. Network Type: Select Infrastructure from the drop-down list.

4. TX Power: Select a transmit power from the drop-down list..

5. Click on the Apply button to save the changes.

USB Adapter for MAC OS 10.3, 10.4 and 10.5– Installation

1. Insert the CD-ROM that was provided to you in this package. The setup should run

automatically. If the setup does not run automatically, then you must manually select the

setup file from the CD-ROM drive.

2. Click on the Continue button to configure the next step.

Quick Installation Guide

Wireless Adapter RNX-N1/N1MAC

3. Select the Macintosh HD and then click on the Continue button.

4. Click on the Continue button to configure the next step.

5. The installation is complete. Click on the Restart button.

Quick Installation Guide

Wireless Adapter RNX-N1/N1MAC

6. Carefully insert the USB adapter into the USB port. MAC OS X will then detect and

install the new hardware.

7. The Rosewill Client Utility is installed in the Applications folder.

USB Adapter Adding a Profile – MAC OS 10.3 10.4 10.5

The Profile tab is used to store the settings of multiple Access Points such as home, office, café,

etc. When adding a profile you are required to enter a profile name and SSID as well as

configure the power-saving mode, network type, RTS/fragmentation threshold and

encryption/authentication settings.

Quick Installation Guide

Wireless Adapter RNX-N1/N1MAC

1. Profile: Enter a name for the profile; this does not need to be the same as the

SSID.

2. SSID: Enter the SSID of the network or select one from the drop-down list. The

SSID is a unique name shared among all points in your wireless network. The

SSID must be identical for all points in the network, and is case-sensitive.

3. PSM: Select a power saving mode (PSM) option.

CAM (Continuously Awake Mode): Select this option if your notebook is

always connected to the power supply.

PSM (Power Saving Mode): Select this option if your notebook uses its

battery power. This option minimizes the battery usage while the network is

idle.

4. Network Type: Select Infrastructure from the drop-down list.

5. TX Power: Select a transmit power from the drop-down list. If your notebook is

connected to external power then select 100% or auto, if not, select one of the

lower values for power saving.

6. RTS Threshold: Place a check in this box if you would like to enable RTS

Threshold. Any packet in the RTS/CTS handshake larger than the specified value

(bytes) will be discarded.

7. Fragment Threshold: Place a check in this box if you would like to enable

Fragment Threshold. Any packet larger than the specified value (bytes) will be

discarded.

8. Click on the Apply button to save the changes.

For advanced configuration, refer to the User’s Manual in the CD-ROM provided.

Otros manuales para RNX-N1/N1MAC

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Adaptador de Rosewill

Rosewill

Rosewill IDE 3-in-1 Manual de usuario

Rosewill

Rosewill RNX-N300UB Manual de usuario

Rosewill

Rosewill RNX-AC1900UB Manual de usuario

Rosewill

Rosewill N150 Manual de usuario

Rosewill

Rosewill RNX-AC1200UBv2 Manual de usuario

Rosewill

Rosewill User for RNX-N100 RNX-N100 Manual de usuario

Rosewill

Rosewill RNX-N180UBE Manual de usuario

Rosewill

Rosewill RNX-G1 Manual de usuario

Rosewill

Rosewill RNX-G300EXLX Manual de usuario

Rosewill

Rosewill RNF-405U Manual de usuario

Rosewill

Rosewill RNX-N180UBE Manual de usuario

Rosewill

Rosewill Wireless Adapter RNX-EasyN1 Manual de usuario

Rosewill

Rosewill AC1200UBE Manual de usuario

Rosewill

Rosewill AC1200UBE2 Manual de usuario

Rosewill

Rosewill RC-600 Manual de usuario

Rosewill

Rosewill RNX-AC1200UB Manual de usuario

Rosewill

Rosewill RNX-N600UBE Manual de usuario

Rosewill

Rosewill Ethernet Adapter Manual de usuario

Rosewill

Rosewill RNX-N180PCE Manual de usuario

Rosewill

Rosewill RNX-N1/N1MAC Manual de usuario

Rosewill

Rosewill RPLC-200 Manual de usuario

Rosewill

Rosewill AC600 Manual de usuario

Rosewill

Rosewill RNX-MiniN2 Manual de usuario

Rosewill

Rosewill RC208 Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario