Rosewill AC1200UBE Manual de usuario
Wireless 11ac Dual Band USB Adapter AC1200UBE
Quick Installation Guide
Wireless 11ac Dual Band USB Adapter AC1200UBE Quick Installation Guide
2
Safety Information:
In order to keep the safety of users and your properties, please follow the following safety
instructions:
1. This USB wireless network card is designed for indoor use only. DO NOT expose this
network card to direct sun light, rain, or snow.
2. DO NOT put this network card at or near hot or humid places, like kitchen or bathroom. Also,
do not left this wireless network card in the car in summer.
3. This network card is small enough to put in a child”s mouth, and it could cause serious injury
or could be fatal. If they throw the network card, the card will be damaged. PLEASE KEEP
THIS NETWORK CARD OUT THE REACH OF CHILDREN!
4. This network card will become hot when being used for long time (This is normal and is not
a malfunction). DO NOT put the network card on a paper, cloth, or other flammable objects
after the network card has been used for a long time.
5. There”s no user-serviceable part inside the network card. If you found that the network card
is not working properly, please contact your dealer of purchase and ask for help. DO NOT
disassemble the network card by yourself, warranty will be void.
6. If the network card falls into water, DO NOT USE ITAGAIN BEFORE YOU SEND THE
CARD TO THE DEALER OF PURCHASE FOR INSPECTION.
7. If you smell something strange or even see some smoke coming out from the network card,
switch the computer off immediately, and call dealer of purchase for help.
Wireless 11ac Dual Band USB Adapter AC1200UBE Quick Installation Guide
3
Overview
Thank you for purchasing Rosewill”s Wireless 11ac Dual Band USB adapter - AC1200UBE. This
is an extremely high-speed 802.11 a/b/g/n/ac dual band wireless network USB Adapter. This
wireless network adapter is transferring data at a transfer rate of 300Mbps at 2.4GHz or
867Mbps at 5GHz.
AC1200UBE with an easy-to-install USB 3.0 interface and Adjustable foldable antenna for
optimum Wi-Fi performance, setting up this wireless adapter will be just as easy!
1.1 Package Content
Before getting started, please verify that your package includes the following items:
1. Rosewill AC1200UBE Wireless 11ac Dual Band USB Adapter x 1
2. Quick Installation Guide x 1
3. Resource CD x 1, including:
Wireless Utility and Driver
User Manual
Quick installation guide x 1
Note:
Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with
your distributor.
1.2 System Requirement
You must have at least the following
A desktop PC or Notebook with An empty USB 3.0 port (May not be able work with USB 1.1
port, performance will be greatly reduced)
At least a 300MHz processor and 32MB of memory
Windows OS for Windows XP, Vista, Windows 7, and Windows 8
At least 100MB of available disk space
A CD-ROM Drive
An 802.11ac, 802.11n, 802.11g or 802.11a/b Wireless (and Dual Band) Access
Point/Router (for infrastructure Mode) or another 802.11ac, 802.11n, 802.11g or 802.11b
wireless (and Dual Band) adapter (for Ad-Hoc; Peer-to-Peer networking mode).
Installation Guide
2.1 Hardware Diagram
1. USB Connector
Wireless 11ac Dual Band USB Adapter AC1200UBE Quick Installation Guide
4
2. Foldable External Wireless Antenna
3. Link/Activity LED
4. WPS Button (Press to activate WPS pairing mode)
2.2 Dual Band Wireless Adapter Driver and Utility Installation
Please follow the following instructions to install your new wireless network card:
1. Insert the USB wireless network card into an empty USB 3.0 port of your computer when
computer is switched on. Never use force to insert the card, if you feel it”s stuck, flip the card
over and try again.
2. Insert device driver CDROM into the CD/DVD ROM drive of your computer, and execute
“Setup.exe”program in “Driver”folder.
Wireless 11ac Dual Band USB Adapter AC1200UBE Quick Installation Guide
5
3. The following message will appear
on your computer, click “Close”.
4. Insert device driver CD-ROM into
the CD/DVD ROM drive of your
computer. Select “Driver/Utility
Installation” to install the software
program.
5. Then Click “Next”to continue.
Installation procedure needs few
minutes to complete, please be
patient.
6. Click “Finish”to restart your
computer to complete installation
procedure. If you don”t want to
restart computer now, select “No, I
will restart my computer later”
option and click “Finish”.
7. Please note you have to restart
your computer before you can use
your new USB wireless network
adapter.
Connect to Wireless Access Point
Using Configuration Utility to Connect to Wireless Access Point:
Wireless 11ac Dual Band USB Adapter AC1200UBE Quick Installation Guide
6
1. After installation is complete,
wireless configuration utility will be
shown in the desktop of your
computer automatically. You will
also see an icon at the bottom-right
corner of your windows system.
You can click the icon by right
mouse key, and select the
configuration utility you want to
use.
2. Wireless utility will appear. Click
“Available Network”tab to search
for wireless access points nearby.
Wireless 11ac Dual Band USB Adapter AC1200UBE Quick Installation Guide
7
3. Please wait for a while, and all
wireless access points which can
be reached by this wireless
network adapter will be displayed
here.
4. Please select the access point you
want to connect, and then double
click on it or click “Add to Profile”.
5. If the wireless access point you
want to connect does not show
here, please click “Refresh”.
6. If a password (Network Key) is
required to access the wireless
access point, please enter it in
“Network key”(and enter it again
in “Confirm network key”for
confirmation). Click “OK”when
password is properly inputted.
Wireless 11ac Dual Band USB Adapter AC1200UBE Quick Installation Guide
8
7. The network adapter will attempt to
connect to access point now, this
may require few seconds to
minutes, please be patient. When
the “Status”become “Associated”
in “General”tab, your computer is
connected to access point you
selected. Click “Close”to close
configuration menu.
NOTE: If you insert the USB wireless
network adapter into an USB 3.0 port
and connect to an 11acAP, device
driver will perform an auto USB mode
switch and shown the message as
below photo, or you will heard sounds
of USB insert or unplug, this is the
normal states.
For advanced settings and other features of this USB wireless network adapter, please refer to user
manual enclosed in supplied CD-ROM.
Thank you for purchasing a quality Rosewill Product.
Please register your product at: www.rosewill.com for complete warranty information and future
support for your product. Let us know!
Rosewill Support: techsupport@rosewill.com
Call Center: (800) 575-9885
Web: http://www.rosewill.com
Otros manuales para AC1200UBE
1
Tabla de contenidos
Otros manuales de Adaptador de Rosewill
Rosewill
Rosewill RX81-CW-DS BLK/SLV Manual de usuario
Rosewill
Rosewill RNX-G300EXLX Manual de usuario
Rosewill
Rosewill RNX-N2X Manual de usuario
Rosewill
Rosewill RNX-N180UB Manual de usuario
Rosewill
Rosewill WIRELESS N ADAPTER RNX-N150UBE Manual de usuario
Rosewill
Rosewill RNX-N250UB Manual de usuario
Rosewill
Rosewill RWND-N1501UB Manual de usuario
Rosewill
Rosewill AC1200UBE2 Manual de usuario
Rosewill
Rosewill RNWD-N1501UB Manual de usuario
Rosewill
Rosewill RNX-N180PCE Manual de usuario
Rosewill
Rosewill RCW618 Manual de usuario
Rosewill
Rosewill RC-221 Manual de usuario
Rosewill
Rosewill RPLC-200 Manual de usuario
Rosewill
Rosewill RNX-N300UB Manual de usuario
Rosewill
Rosewill RNX-N250PCe Manual de usuario
Rosewill
Rosewill RNX-N1/N1MAC Manual de usuario
Rosewill
Rosewill N150 Manual de usuario
Rosewill
Rosewill RNX-AC600HGUBEv2 Manual de usuario
Rosewill
Rosewill RNX-N600PCE_v2.0 Manual de usuario
Rosewill
Rosewill RNX-N600PCE_v2.0 Manual de usuario
