ROSE DISPLAYS ANOQUICK ROUND WITH MULTICLIPS Manual de usuario

35 Congress Street, Salem, MA 01970

Tel# 1- 800 631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

Instruction Sheet

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4 Repeat steps 3 & 4

for second MultiClip.

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClips for future projects.

MultiClips

1UP-0101

End Caps

06-5525

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

AnoQuick™

Instructions for Hanging

Incept-7.31.02

Figure 2

AnoQuick

12A300

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickMC

Figure 3

Figure 5

Figure 4

Figure 1

Figure 6

35 Congress Street, Salem, MA 01970

Tel# 1- 800 631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions for Hanging

OneUp

Instruction Sheet

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClip for future projects.

AnoQuick™

Incept-7.31.02

End Caps

06-5525

AnoQuick

12A300

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickMC

MultiClip

1UP-0101

Figure 2

Figure 3

Figure 5

Figure 4

Figure 1

Figure 6

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions for Hanging

Instruction Sheet

AnoQuickTM

Incept-7.31.02

End Caps

06-5525

AnoQuick

12A300

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickMC

MultiClips

1UP-0101

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4 Repeat steps 3 & 4

for second MultiClip.

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClips for future projects.

Figure 2

Figure 3

Figure 5

Figure 4

Figure 1

Figure 6

Incept-7.31.02

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions for Hanging

OneUp

Instruction Sheet

AnoQuick™

Incept-7.31.02

End Caps

06-5525

AnoQuick

12A300

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickMC

MultiClip

1UP-0101

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClip for future projects.

Figure 2

Figure 3

Figure 5

Figure 4

Figure 1

Figure 6

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de ROSE DISPLAYS

ROSE DISPLAYS

ROSE DISPLAYS ANOMULTI SQUARE WITH CABLE CLIP AND BALL... Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS RAN-BAS-CC SPIDER ANCHOR-GENERIC Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ULTRAFRAME Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ECONOSTAND WITH ANOFRAME Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK SQUARE NO HANGING Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH CABLE CLIP AND CABLE AND... Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS QUICKGRIP WITH CABLE CLIP AND LOOP AND... Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOMULTI WITH WINDOW MOUNTS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA PLUS WITH MULTICLIPS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS SLIM HOLDER Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH MULTICLIPS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND WITH 2 WALL MOUNTS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS RAN-BAS-CC WITH LOOP AND BALL Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS RAN-BAS-CC WITH BALL CHAIN Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND ASSEMBLED-MOLLY ANCHORS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK SQUARE WITH GOTCHA AND MULTICLIPS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOMULTI ROUND WITH CABLE AND SAUCER Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ECONOFRAME ASSEMBLED WITH WALL HANGERS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS CABLE CLIP Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME SQUARE WITH CABLE CLIP AND LOOP AND... Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOGRIP WITH MULTICLIPS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT WEIGHTED BASE SQ Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT CEILING ANCHORS Manual de usuario

ROSE DISPLAYS

ROSE DISPLAYS ROPOLE-OMNI HEAD WITH MAGNETS Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario