Rosco ND100 Manual de usuario
ND100 User Guide
1
Rosco Vision Systems : ND100
ND100
USER GUIDE
By :
ND100 User Guide
2
Rosco Vision Systems : ND100
Index
Contents
About Product...................................................................................................................................3
Interfaces ..................................................................................................................................3
Power on the ND100:........................................................................................................4
Configure ND100...............................................................................................................4
Homepage .........................................................................................................................5
Manage WIFI User.............................................................................................................6
Settings..............................................................................................................................7
Advance Settings .............................................................................................................14
ND100 User Guide
3
Rosco Vision Systems : ND100
About Product
ND100 is a Mini Router is a CAT-4 device which can support high download
and upload throughput as per the 3GPP standards with following features :
◼Supports FDD-LTE on band
◼Supports WCDMA on band
◼Supports WIFI 802.11b/g/n on 2.4GHz & 802.11ac on 5GHz with Internal Antennas.
◼Max 8 users can connect over WIFI
◼1 x RJ45 Port for LAN (10/100 BaseT support)
◼SIM Slot with 3FF MICRO SIM standard
◼2x RP-SMA connectors for Cellular Antennas
Interfaces
ND100 User Guide
4
Rosco Vision Systems : ND100
Let’s start using ND100
1. Insert SIM card with 3FF (MICRO SIM) into SIM slot section.
2. Connect both antennas provided with packaging.
Power on the ND100:
⚫ND100 can be power on using USB, Just connect USB to your PC.
OR
Using 4 PIN Molex connector for Power Supply (Ref. Interface section). Kindly use the
adaptor & cables provided with packaging.
⚫Power Led will be turned out Green, which indicates that device is powered on
successfully and it is ready to use or setup the device configurations if required.
Configure ND100
⚫Turn ON the device and connect LAN port with your PC .
ND100 User Guide
5
Rosco Vision Systems : ND100
⚫Device support webGUI management. Which means it can be setup using any web
browser which makes this device so easy to configure
⚫Once your PC recognized this device , you can open any web browser
⚫Input http://192.168.0.1 on address bar and hit enter.
⚫User will get login window for ND100 as below
User needs to enter admin/admin for Username/Password.
NOTE:
➢Default password is admin but it can be modify.
➢After press reset switch or select factory default function from webGUI,
Password will be again as default (admin) with all the default configurations.
⚫After input correct credentials, click on Sign In tab.
User can login to web management page.
Homepage
⚫After log-in , User can see homepage where all the basic details about ND100 are displayed
like:
IMEI
Firmware & Hardware version
SIM card ICCID
Network Status and Signals information
WIFI Status with SSID, Password and connected users
Internet status with available WAN IP, connected time and data usage.
ND100 User Guide
6
Rosco Vision Systems : ND100
Manage WIFI User
⚫On Connected Devices page, User can see all the connected devices details like IP & MAC
address and if required, user can block any unwanted or suspicious connected device by
simply click on Block tab.
All the blocked devices can be seen under Blocked devices. Where user can also unblock them if
required.
ND100 User Guide
7
Rosco Vision Systems : ND100
Settings
⚫On this section, User can see different important configuration settings like:
WIFI Setting
Device Settings
Mobile Network
Remote Update (Firmware over the Air feature)
WIFI Settings
➢On this page, User can configure the WIFI feature like SSID, Security , Password,
Transmission mode & channel etc. ( ref. image )
ND100 User Guide
8
Rosco Vision Systems : ND100
WiFi Name (SSID): Subscriber set identity; User can define this field as per their requirement.
Default SSID is “default_XXXXXX“(last six characters for WIFI MAC address)
Security: available options are None ( as Default), WAP2 Personal (AES) & WPA/WPA2 Mixed
Mode
WIFI Password (Key): User can setup password 8~ 63 ASCII characters for password. By Default ,
There is no password.
802.11 Mode: Supports 802.11 bgn (as default) & 802.11ac.
Channel: Supports Automatic channel (as default) and manual channel from 1 ~ 9 for
802.11bgn
Supports Automatic channel (as default) and manual channel from
36, 40, 44, 48, 149, 153, 157, 161& 165 for 802.11ac.
Broadcast Wi-Fi Name (SSID): Enabled as default. If disabled, SSID name will not be visible during
WIFI AP scan.
Wi-Fi Privacy Separation: Enabled as default, User can uncheck it wants to disable this security
function.
Max WIFI connections: Default is 8, user can defined the number of devices (1~8) which can
connect to ND100 over WIFI
NOTE: After change any configuration, User needs to click on Save Changes tab on below to save
the modify configurations.
Device Settings
Admin Password: on this page, user can change the default password if required.
User need to first input existing password and click on continue as below
ND100 User Guide
9
Rosco Vision Systems : ND100
New page will open and then user needs to put current admin password and then only User can
define new password , ref below image
To make change into effect, user must need to click on Save Changes tab.
Backup and Restore: On this section, User can get many important features like
backup/Restore, Reboot/Reset.
ND100 User Guide
10
Rosco Vision Systems : ND100
⚫To backup the current configuration, User needs to input admin password and then click on
Download tab to the PC connected to device. (ref. below image)
⚫To restore any saved configuration of ND100 from local PC, User needs to input admin
password first then click on browse and then select the correct file from the local connected
Tabla de contenidos
Manuales populares de Enrutador de red de otras marcas
NETGEAR
NETGEAR FS526T - Switch Manual de usuario
Korenix
Korenix JetNet 5710G Series Manual de usuario
Automated Logic
Automated Logic ZN551 Manual del propietario
Cisco
Cisco ASR 1000 Series Manual del operador
EnGenius
EnGenius ESR-9710 Manual de usuario
Cisco
Cisco 805 Series Instrucciones de funcionamiento y seguridad