Rosch Computer ROSCH-Q67FVISA Manual de usuario

ROSCH-Q67-FVISA

Industrial Computer Board

Preface

▍

We take every care in the preparation of this document, but no guarantee is given

as to the correctness of its contents. Our products are under continual improve-

ment and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

NVIDIA®is registered trademark of NVIDIA Corporation.

ATI®is registered trademark of ATI Technologies, Inc.

AMD®is registered trademarks of AMD Corporation.

Intel®is registered trademarks of Intel Corporation.

Windows®is registered trademarks of Microsoft Corporation.

AMI®is registered trademark of Advanced Micro Devices, Inc.

Award®is a registered trademark of Phoenix Technologies Ltd.

Sound Blaster®is registered trademark of Creative Technology Ltd.

Realtek®is registered trademark of Realtek Semiconductor Corporation.

JMicron®is registered trademark of JMicron Technology Corporation.

Netware®is a registered trademark of Novell, Inc.

Revision History

Revision Revision History Date

V2.1 For PCB v2.x 2012/04

Technical Support

If a problem arises with your system and no solution can be obtained from the

user’s manual, please contact your place of purchase or local distributor. Alterna-

tively, please try the following help resources for further guidance.

￭

iii

ROSCH-Q67-FVISA

Safety Instructions

Always read the safety instructions carefully.

Keep this User’s Manual for future reference.

Keep this equipment away from humidity.

Lay this equipment on a reliable at surface before setting it up.

The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

Place the power cord such a way that people can not step on it. Do not

place anything over the power cord.

Always Unplug the Power Cord before inserting any add-on card or mod-

ule.

All cautions and warnings on the equipment should be noted.

Never pour any liquid into the opening that could damage or cause electri-

cal shock.

If any of the following situations arises, get the equipment checked by ser-

vice personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well or you can not get it work according

to User’s Manual.

The equipment has dropped and damaged.

The equipment has obvious sign of breakage.

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDI-

TIONED, STORAGE TEMPERATURE ABOVE 60oC (140oF), IT MAY DAM-

AGE THE EQUIPMENT.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with

the same or equivalent type recommended by the manufacturer.

警告使用者:

這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情

況下，使用者會被要求採取某些適當的對策。

廢電池請回收

For better environmental protection, waste batteries should be

collected separately for recycling special disposal.

￭

◯

￭

Preface

▍

FCC-B Radio Frequency Interference Statement

This equipment has been tested and

found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed

to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the measures listed below.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

Notice 1

The changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

◯

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

this device may not cause harmful interference, and

this device must accept any interference received, including interference that

may cause undesired operation.

ROSCH-Q67-FVISA

WEEE (Waste Electrical and Electronic Equipment) Statement

ENGLISH

To protect the global environment and as an environmentalist, we must remind

you that...

Under the European Union (“EU”) Directive on Waste Electrical and Electronic

Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005,

products of “electrical and electronic equipment” cannot be discarded as municipal waste

anymore and manufacturers of covered electronic equipment will be obligated to take back

such products at the end of their useful life. We will comply with the product take back re-

quirements at the end of life of the products that are sold into the EU. You can return these

products to local collection points.

Preface

▍

CONTENTS

Trademarks .......................................................................................................... ii

Revision History .................................................................................................. ii

Technical Support ............................................................................................... ii

Safety Instructions ............................................................................................. iii

FCC-B Radio Frequency Interference Statement ............................................ iv

WEEE (Waste Electrical and Electronic Equipment) Statement ......... v

Chapter 1 Overview.......................................................................................... 1-1

Mainboard Specications........................................................................... 1-2

Mainboard Layout ...................................................................................... 1-4

Chapter 2 Hardware Setup............................................................................... 2-1

Quick Components Guide.......................................................................... 2-2

CPU (Central Processing Unit) .................................................................. 2-3

Memory ..................................................................................................... 2-6

Power Supply............................................................................................. 2-8

Back Panel I/O ........................................................................................... 2-9

Connector ................................................................................................ 2-11

Jumper ..................................................................................................... 2-18

Slot........................................................................................................... 2-20

▍

Thank you for choosing this product, an excellent in-

dustrial computer board.

Based on the innovative Intel®Q67 chipsets for op-

timal system efciency, the board accommodates

the Intel®Core™i7 / i5 / i3 or Celeron® processor in

Socket 1155 and supports 4 DDR3 1066/1333 DIMM

slots to provide the maximum of 32GB memory ca-

pacity.

In the entry-level and mid-range market segment,

the product provides a high-performance solution for

today’s front-end and general purpose workstation, as

well as in the future.

Chapter 1

Overview

1-2

Overview

▍

Mainboard SpecificationS

CPU Intel®Core™i7 / i5 / i3 or Celeron®processor in

Socket 1155

■

Chipset Intel®Q67 Chipset■

Memory 2 unbuffered DDR3 1066/1333 DIMM slots

Supports the maximum of 32GB

■

LAN Intel®82579LM Gigabit Fast Ethernet controller

Intel®82574L Gigabit Fast Ethernet controller

■

SATA 4 SATA 3Gb/s ports

2 SATA 6Gb/s ports

■

USB 3.0 2 USB 3.0 ports (back panel)*

*Each port can provide 500mA output.

■

Audio Chip integrated by Realtek® ALC887

Supports 7.1 channels audio out

Compliant with Azalia 1.0 Spec

■

Graphics Onboard graphics integrated in Intel®2D/3D Graph-

ics controller

■

1-3

ROSCH-Q67-FVISA

Back

Panel I/O

& Connec-

tors/Pin-

headers

Back Panel I/O

2 COM ports

1 DVI-I port

1 Display port

10 USB 2.0 ports*

2 USB 3.0 ports*

2 Gigabit LAN jacks

*Each port can provide 500mA output.

■-

Onboard Connectors/Pinheaders

2 USB 2.0 pinheaders (4 ports)*

1 parallel port connector

4 serial port connectors

1 front panel pinheader

1 front panel audio pinheader

1 chassis intrusion connector

1 S/PDIF-in connector

1 LVDS connector

1 amplier pinheader

2 COM port power jumper

1 LVDS power jumper

*Each port can provide 500mA output.

■-

Slot 1 PCI Express x 16 slot

1 PCI Express x 4 slot

1 PCI Express x 1 slot

2 32-bit 33/66MHz 3.3v PCI slots

3 ISA slots

■

Form Fac-

tor

ATX: 24.5cm x 30.5cm■

1-4

Overview

▍

Mainboard Layout

Power

Connector

Serial Port Power

Connectors

LVDS Connector

SATA Connectors

DIMM Slots

Back Panel

Front Panel

Connector

CPU Fan

Connector

USB Connectors

Chassis Intrusion Connector

LVDS Power

Connector

Clear CMOS Jumper

Parallel Port Connector

System Fan

Connector

ISA Slots

CPU

Audio power

amplier

Connector

J4 Connector

Power

Connector

Serial Port Connectors

Front Panel Audio

Connector

S/PDIF-In

Connector

PCI Slots

PCIE x16 Slot

PCIE x4 Slot

PCIE x1 Slot

Serial Port

Connectors

ME Connector

Otros manuales para ROSCH-Q67FVISA

Tabla de contenidos

Otros manuales de Placa madre de Rosch Computer

Rosch Computer

Rosch Computer MS-98A9 Manual de usuario

Rosch Computer

Rosch Computer G7B630-NRM Manual de usuario

Rosch Computer

Rosch Computer CA331-NR Manual de usuario

Rosch Computer

Rosch Computer EMB-M2 Manual de usuario

Rosch Computer

Rosch Computer iQ965-IGM Series Manual de usuario

Rosch Computer

Rosch Computer EMB-M4 Manual de usuario

Rosch Computer

Rosch Computer i910GML-DCQIC9 Manual de usuario

Rosch Computer

Rosch Computer G4V506-P Manual de usuario

Rosch Computer

Rosch Computer G7VP2 Manual de usuario

Rosch Computer

Rosch Computer MB770 Manual de usuario

Rosch Computer

Rosch Computer i910GML-DCQIC6 Manual de usuario

Rosch Computer

Rosch Computer G5M150-N Manual de usuario

Rosch Computer

Rosch Computer GITOX3 Manual de usuario

Rosch Computer

Rosch Computer MS-98H4 Manual de usuario

Rosch Computer

Rosch Computer MX3955U Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario