Ronix 8012 Manual de usuario

CORDLESS DRIVER DRILL

8012, 8012C, 8014, 8018

USER MANUAL 3

TECHNICAL SPECIFICATION

GENERAL POWER TOOL SAFETY RULES

WARNING!

-Read all safety warnings and all instructions. Failure to

follow the warnings and instructions may result in electric

shock, re and/or serious injury. -Save all warnings and

instructions for future reference. -The term «power tool» in

the warnings refers to your mains-operated (corded) power

tool or battery-operated (cordless) power tool.

.WORK AREA SAFETY

-Keep work area clean and well lit. Cluttered or dark areas

invite accidents.

-Do not operate power tools in explosive atmospheres,

such as in the presence of ammable liquids, gases or

Model 8012 8012C 8014 8018

Battery voltage 12V 12V 14.4V 18V

Max. torque 21Nm 21Nm 26Nm 30Nm

Net weight 1Kg 1Kg 1.2Kg 1.3Kg

Torque setting 21+1 step 21+1step 21+1step 21+1step

Chuck size 10mm

No load speed 0-400/0-1350RPM

Battery capacity 1.5Ah

Charge time 1Hr30

CORDLESS DRIVER DRILL

dust. Power tools create sparks which may ignite the dust

or fumes.

-Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

.ECTRICAL SAFETY

-Power tool plugs must match the outlet. Never modify the

plug in any way. Do not use any adapter plugs with earthed

(grounded) power tools. Unmodied plugs and matching

outlets will reduce risk of electric shock.

-Avoid body contact with earthed or grounded surfaces

such as pipes, radiators, ranges and refrigerators. There is

an increased risk of electric shock if your body is earthed

or grounded.

-Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

-Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away from

heat, oil, sharp edges or moving parts. Damaged or entan-

gled cords increase the risk of electric shock.

-When operating a power tool outdoors, use an extension

cord suitable for outdoor use. Use of a cord suitable for

outdoor use reduces the risk of electric shock.

-If operating a power tool in a damp location is unavoid-

able, use a ground fault circuit. Interrupter (GFCI) protect-

ed supply. Use of a GFCI reduces the risk of electric shock.

USER MANUAL 5

.PERSONAL SAFETY

-Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power

tool while you are tired or under the inuence of drugs,

alcohol or medication. A moment of inattention while op-

erating power tools may result in serious personal injury.

-Use personal protective equipment. Always wear eye pro-

tection. Protective equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used for ap-

propriate conditions will reduce personal injuries.

-Prevent unintentional starting. Ensure the switch is in the

off-position before connecting to power source and/ or bat-

tery pack, picking up or carrying the tool. Carrying power

tools with your nger on the switch or energizing power

tools that have the switch on invites accidents.

-Remove any adjusting key or wrench before turning the

power tool on. A wrench or a key left attached to a rotating

part of the power tool may result in personal injury.

-Do not overreach. Keep proper footing and balance at all

times. This enables better control of the power tool in un-

expected situations.

-Dress properly. Do not wear loose clothing or jewelry.

Keep your hair, clothing, and gloves away from moving

parts. Loose clothes, jewelry or long hair can be caught in

moving parts.

-If devices are provided for the connection of dust extraction

and collection facilities, ensure these are connected and

properly used. Use of dust collection can reduce dust-re-

lated hazards.

CORDLESS DRIVER DRILL

.POWERTOOL USE AND CARE

-Do not force the power tool. Use the correct power tool for

your application. The correct power tool will do the job better

and safer at the rate for which it was designed.

-Do not use the power tool if the switch does not turn it on and

off. Any power tool that cannot be controlled with the switch is

dangerous and must be repaired.

-Disconnect the plug from the power source and/or the bat-

tery pack from the power tool before making any adjustments,

changing accessories, or storing power tools. Such preven-

tive safety measures reduce the risk of starting the power tool

accidentally.

-Store idle power tools out of the reach of children and do not

allow persons unfamiliar with the power tool or these instruc-

tions to operate the power tool. Power tools are dangerous in

the hands of untrained users.

-Maintain power tools. Check for misalignment or binding of

moving parts, breakage of parts and any other condition that

may affect the power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents are caused

by poorly maintained power tools.

-Keep cutting tools sharp and clean. Properly maintained cut-

ting tools with sharp cutting edges are less likely to bind and

are easier to control.

-Use the power tool, accessories and tool bits etc. in accor-

dance with these instructions, taking into account the working

conditions and the work to be performed. Use of the power

tool for operations different from those intended could result

in a hazardous situation.

USER MANUAL 7

.BATTERY USE AND CARE

-Recharge only with the charger specied by the manufac-

turer. A charger that is suitable for one type of battery pack

may create a risk of re when used with another battery

pack.

-Use power tools only with specically designated battery

packs. Use of any other battery packs may create a risk of

injury and re.

-When battery pack is not in use, keep it away from other

metal objects, like paper clips, coins, keys, nails, screws or

other small metal objects that can make a connection from

one terminal to another. Shorting the battery terminals to-

gether may cause burns or a re.

-Under abusive conditions, liquid may be ejected from the

battery; avoid contact. If contact accidentally occurs, ush

with water. If liquid contacts eyes, additionally seek medical

help. Liquid ejected from the battery may cause irritation or

burns.

.SERVICE

-Have your power tool serviced by a qualied repair person

using only identical replacement parts. This will ensure that

the safety of the power tool is maintained.

-Follow instruction for lubricating and changing accessories.

-Keep handles dry, clean and free from oil and grease.

CORDLESS DRIVER DRILL

CORDLESS DRILL/SCREW DRIVER SAFETY

WARNING!

-Hold power tool by insulated gripping surfaces, when per-

forming an operation where the fastener may contact hidden

wiring or its own cord. Fasteners contacting a «live» wire may

make exposed metal parts of the power tool live and could

give the operator an electric shock.

-Always be sure you have a rm footing. Be sure no one

is below when using the tool in high locations.

-Hold the tool rmly.

-Keep hands away from rotating parts.

-Do not leave the tool running. Operate the tool only

when hand-held.

-Do not touch the drill bit or the work piece immediately

after operation; they may be extremely hot and could

burn your skin.

-Some material contains chemicals which may be toxic.

Take caution to prevent dust inhalation and skin contact.

Follow material supplier safety data.

WARNING! WORKING ENVIRONMENT

Do not let comfort or familiarity with product (gained from

repeated use) replace strict adherence to safety rules for

the subject product. Misuse or failure to follow the safety

rules stated in this instruction manual may cause serious

personal injury.

USER MANUAL 9

IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY

CARTRIDGE

-Before using battery cartridge, read all instructions and

cautionary markings on (1) battery charger, (2) battery,

and (3) product using battery.

-Do not disassemble battery cartridge.

-If operating time has become excessively shorter, stop op-

erating immediately. It may result in a risk of overheating,

possible burns and even an explosion.

-If electrolyte gets into your eyes, rinse them out with clear

water and seek medical attention right away. It may result

in loss of your eyesight.

.DO NOT SHORT THE BATTERY CARTRIDGE

-Do not touch the terminals with any conductive material.

-Avoid storing battery cartridge in a container with other

metal objects such as nails, coins, etc.

-Do not expose battery cartridge to water or rain. A battery

short can cause a large current ow, overheating, possible

burns and even a breakdown.

-Do not store the tool and battery cartridge in locations

where the temperature may reach or exceed 50° C (122°F).

-Do not incinerate the battery cartridge even if it is severely

damaged or is completely worn out. The battery cartridge

can explode in a re.

-Be careful not to drop or strike battery.

-Do not use a damaged battery.

CORDLESS DRIVER DRILL

TIPS FOR MAINTAINING MAXIMUM BATTERY LIFE

-Charge the battery cartridge before completely discharged.

Always stop tool operation and charge the battery cartridge

when you notice less tool power.

-Never recharge a fully charged battery cartridge. Over-

charging shortens the battery service life.

-Charge the battery cartridge with room temperature at

10°C - 40°C (50°F - 104°F). Let a hot battery cartridge

cool down before charging it.

LIGHTING UP THE FRONT LAMP

CAUTION:

Do not look in the light or see the source of light directly.

Pull the switch trigger to light up the lamp. The lamp keeps

on lighting while the switch trigger is being pulled.

NOTE:

Use a dry cloth to wipe the dirt off the lens of lamp. Be

Lamp

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Perforar de otras marcas

Makita

Makita BDF456 Manual de usuario

Black & Decker

Black & Decker LDX220 Manual de usuario

Hitachi

Hitachi DH 40MA Manual de usuario

Challenge

Challenge JO Manual de referencia técnica

Makita

Makita LXFD01 Manual de usuario

Festool

Festool T18+3 Manual de usuario

Milwaukee

Milwaukee M12 FPDX-202X Manual de usuario

EINHELL

EINHELL TE-RH 32 E Manual de usuario

Makita

Makita DHP484 Manual de usuario

Makita

Makita FD05 Manual de usuario

Bosch

Bosch PSB 530 RA Manual de usuario

Maximum

Maximum 054-1359-4 Manual de usuario

Makita

Makita HP332D Manual de usuario

Raider

Raider RDP-HD31H Manual de usuario

Bort

Bort BPM-1400x2 Manual de usuario

Black & Decker

Black & Decker 7266 Manual de usuario

KENT USA

KENT USA TRD1230 Manual de usuario

Bosch

Bosch GSB 19-2 RE Manual de usuario