Rohde & Schwarz FE50DTR Manual de usuario
R&S®FE50DTR
External Frontend
Manual
1179318002
Version 02
(;ÝOÞ2)
This manual describes the following R&S®FE50DTR model and its option:
●FE50DTR, variant K2: 50 GHz up-/down-converter (1347.4099K02)
© 2021 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Email: [email protected]
Internet: www.rohde-schwarz.com
Subject to change – data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1179.3180.02 | Version 02 | R&S®FE50DTR
The following abbreviations are used throughout this manual: R&S®FE50DTR is abbreviated as
R&S FE50DTR, R&S®FSV3000 and the R&S®FSVA3000 are abbreviated as R&S FSV/A and
R&S®SMW200A is abbreviated as R&S SMW.
Contents
R&S®FE50DTR
3Manual 1179.3180.02 ─ 02
Contents
1 Safety and regulatory information....................................... 5
1.1 Safety Instructions................................................................................5
1.2 Labels on R&S FE50DTR......................................................................8
1.3 Warning messages in the documentation.......................................... 8
1.4 Korea certification class A...................................................................9
2 Documentation overview.................................................... 10
2.1 Manual..................................................................................................10
2.2 Printed safety instructions.................................................................10
2.3 Data sheet............................................................................................10
3 Key features......................................................................... 11
4 Preparing for use................................................................. 12
4.1 Lifting and carrying............................................................................ 12
4.2 Unpacking and checking....................................................................12
4.3 Choosing the operating site.............................................................. 12
4.4 Setting up the R&S FE50DTR............................................................ 13
4.5 Considerations for test setup............................................................ 14
4.6 Connecting to power.......................................................................... 15
4.7 Connecting to LAN............................................................................. 16
4.8 Connecting to SMA and 1.85 mm...................................................... 17
4.9 Connecting the R&S FE50DTR.......................................................... 18
4.10 Switching on or off............................................................................. 20
5 Instrument tour.................................................................... 21
5.1 Front panel tour.................................................................................. 21
5.2 Rear panel tour....................................................................................23
Contents
R&S®FE50DTR
4Manual 1179.3180.02 ─ 02
5.3 Electronic label................................................................................... 25
6 Operating the instrument....................................................27
6.1 Operating the R&S FE50DTR in Rx mode.........................................27
6.2 Operating the R&S FE50DTR in Tx mode......................................... 31
6.3 Operating the R&S FE50DTR in simultaneous mode...................... 35
6.4 Performing other operational tasks and troubleshooting.............. 39
7 Transporting.........................................................................40
8 Maintenance, storage and disposal................................... 41
8.1 Cleaning...............................................................................................41
8.2 Storage.................................................................................................41
8.3 Disposal............................................................................................... 41
9 Contacting customer support............................................ 43
Glossary: Abbreviations and definitions...........................44
Index..................................................................................... 45
Safety and regulatory information
R&S®FE50DTR
5Manual 1179.3180.02 ─ 02
1 Safety and regulatory information
The product documentation helps you use the product safely and efficiently. Fol-
low the instructions provided here and in the following chapters.
Intended use
The product is intended for the development, production and verification of elec-
tronic components and devices in industrial, administrative, and laboratory envi-
ronments. Use the product only for its designated purpose. Observe the operating
conditions and performance limits stated in the data sheet.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:
●In Chapter 1.1, "Safety Instructions", on page 5. The same information is
provided in many languages as printed "Safety Instructions". The printed
"Safety Instructions" are delivered with the product.
●Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
1.1 Safety Instructions
Products from the Rohde & Schwarz group of companies are manufactured
according to the highest technical standards. To use the products safely, follow
the instructions provided here and in the product documentation. Keep the prod-
uct documentation nearby and offer it to other users.
Use the product only for its intended use and within its performance limits. Inten-
ded use and limits are described in the product documentation such as the data
sheet, manuals and the printed "Safety Instructions". If you are unsure about the
appropriate use, contact Rohde & Schwarz customer service.
Using the product requires specialists or specially trained personnel. These users
also need sound knowledge of at least one of the languages in which the user
interfaces and the product documentation are available.
Safety Instructions
Safety and regulatory information
R&S®FE50DTR
6Manual 1179.3180.02 ─ 02
Never open the casing of the product. Only service personnel authorized by
Rohde & Schwarz are allowed to repair the product. If any part of the product is
damaged or broken, stop using the product. Contact Rohde & Schwarz customer
service at http://www.customersupport.rohde-schwarz.com.
Lifting and carrying the product
The maximum weight of the product is provided in the data sheet. To move the
product safely, you can use lifting or transporting equipment such as lift trucks
and forklifts. Follow the instructions provided by the equipment manufacturer.
Choosing the operating site
Only use the product indoors. The product casing is not waterproof. Water that
enters can electrically connect the casing with live parts, which can lead to elec-
tric shock, serious personal injury or death if you touch the casing. If
Rohde & Schwarz provides accessories designed for your product, e.g. a carrying
bag, you can use the product outdoors.
Unless otherwise specified, you can operate the product up to an altitude of
2000 m above sea level. The product is suitable for pollution degree 2 environ-
ments where nonconductive contamination can occur. For more information on
environmental conditions such as ambient temperature and humidity, see the
data sheet.
Setting up the product
Always place the product on a stable, flat and level surface with the bottom of the
product facing down. If the product is designed for different positions, secure the
product so that it cannot fall over.
If the product has foldable feet, always fold the feet completely in or out to ensure
stability. The feet can collapse if they are not folded out completely or if the prod-
uct is moved without lifting it. The foldable feet are designed to carry the weight of
the product, but not an extra load.
If stacking is possible, keep in mind that a stack of products can fall over and
cause injury.
If you mount products in a rack, ensure that the rack has sufficient load capacity
and stability. Observe the specifications of the rack manufacturer. Always install
the products from the bottom shelf to the top shelf so that the rack stands
securely. Secure the product so that it cannot fall off the rack.
Safety Instructions
Safety and regulatory information
R&S®FE50DTR
7Manual 1179.3180.02 ─ 02
Connecting to power
The product is an overvoltage category II product. Connect the product to a fixed
installation used to supply energy-consuming equipment such as household
appliances and similar loads. Keep in mind that electrically powered products
have risks, such as electric shock, fire, personal injury or even death.
Take the following measures for your safety:
●Before switching on the product, ensure that the voltage and frequency indica-
ted on the product match the available power source. If the power adapter
does not adjust automatically, set the correct value and check the rating of the
fuse.
●Only use the power cable delivered with the product. It complies with country-
specific safety requirements. Only insert the plug into an outlet with protective
conductor terminal.
●Only use intact cables and route them carefully so that they cannot be dam-
aged. Check the power cables regularly to ensure that they are undamaged.
Also ensure that nobody can trip over loose cables.
●If the product needs an external power supply, use the power supply that is
delivered with the product or that is recommended in the product documenta-
tion or a power supply that conforms to the country-specific regulations.
●Only connect the product to a power source with a fuse protection of maxi-
mum 20 A.
●Ensure that you can disconnect the product from the power source at any
time. Pull the power plug to disconnect the product. The power plug must be
easily accessible. If the product is integrated into a system that does not meet
these requirements, provide an easily accessible circuit breaker at the system
level.
Cleaning the product
Use a dry, lint-free cloth to clean the product. When cleaning, keep in mind that
the casing is not waterproof. Do not use liquid cleaning agents.
Meaning of safety labels
Safety labels on the product warn against potential hazards.
Safety Instructions
Safety and regulatory information
R&S®FE50DTR
8Manual 1179.3180.02 ─ 02
Potential hazard
Read the product documentation to avoid personal injury or product damage.
Electrical hazard
Indicates live parts. Risk of electric shock, fire, personal injury or even death.
Hot surface
Do not touch. Risk of skin burns. Risk of fire.
Protective conductor terminal
Connect this terminal to a grounded external conductor or to protective ground. This
connection protects you against electric shock if an electric problem occurs.
1.2 Labels on R&S FE50DTR
Labels on the casing inform about:
●Personal safety, see Meaning of safety labels, page 7
●Product and environment safety, see Table 1-1
●Identification and network information, see Electronic label, page 25
Table 1-1: Labels regarding R&S
FE50DTR and environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after
the product has come to the end of its service life. For more information, see "Dispos-
ing electrical and electronic equipment" on page 41.
1.3 Warning messages in the documentation
A warning message points out a risk or danger that you need to be aware of. The
signal word indicates the severity of the safety hazard and how likely it will occur
if you do not follow the safety precautions.
WARNING
Potentially hazardous situation. Could result in death or serious injury if not avoi-
ded.
Warning messages in the documentation
Safety and regulatory information
R&S®FE50DTR
9Manual 1179.3180.02 ─ 02
NOTICE
Potential risks of damage. Could result in damage to the supported product or to
other property.
1.4 Korea certification class A
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하
시기 바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다.
Korea certification class A
Documentation overview
R&S®FE50DTR
10Manual 1179.3180.02 ─ 02
2 Documentation overview
This section provides an overview of the R&S FE50DTR user documentation.
Unless specified otherwise, you find the documents on the R&S FE50DTR prod-
uct page at:
www.rohde-schwarz.com/manual/fe50dtr
2.1 Manual
This manual introduces the R&S FE50DTR and describes how to set up and work
with the product. It also provides information on maintenance, storage and dis-
posal. A printed version is delivered with the product.
For information on how to configure and use the R&S FE50DTR in setups with a
Rohde & Schwarz vector signal generator and Rohde & Schwarz vector signal
analyzer, see the user manual of these instruments.
2.2 Printed safety instructions
Provides safety information in many languages. The printed document is deliv-
ered with the product.
2.3 Data sheet
The data sheet contains the technical specifications of the R&S FE50DTR. It also
lists the options and their order numbers.
See www.rohde-schwarz.com/brochure-datasheet/fe50dtr
Data sheet
Tabla de contenidos
Otros manuales de Instrumento de medición de Rohde & Schwarz
Rohde & Schwarz
Rohde & Schwarz RT-ZC31 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz FSEA20 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz R&S ZNL Series Manual de usuario
Rohde & Schwarz
Rohde & Schwarz R&S ZN-Z3x Manual de usuario
Rohde & Schwarz
Rohde & Schwarz ZVL series Manual de usuario
Rohde & Schwarz
Rohde & Schwarz NGU201 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz FSMR Manual de usuario
Rohde & Schwarz
Rohde & Schwarz R&S FPC Manual de usuario
Rohde & Schwarz
Rohde & Schwarz R&S SMBVB-K548 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz R&S ZNB Manual de usuario
Rohde & Schwarz
Rohde & Schwarz FPC1000 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz RT-ZHD07 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz FPH Manual
Rohde & Schwarz
Rohde & Schwarz HM8118 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz ZPH Series Manual de usuario
Rohde & Schwarz
Rohde & Schwarz RT-ZC30 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz R&S DVMS1 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz ZNA Manual de usuario
Rohde & Schwarz
Rohde & Schwarz HM8123 Manual de usuario
Rohde & Schwarz
Rohde & Schwarz 1409.7766.02 Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario