Voxell VOXELL - INSTALLATION
VOXELL_UMTS_installation_revG_en.doc 9
3. VOXELL - INSTALLATION
For installing the equipment accomplish the following steps:
-configuring and installing the SIM card
-connecting the equipment
-identifying the connectors
-connecting the cables and antenna
-connecting a DTMF phone
-powering the VOXELL
-setting the PIN or PUK code, if is required
3.1. Configuring and installing the SIM card
VOXELL interface works with suited SIM cards for GSM/GPRS/3G
operators to which you want to connect.
Configuring SIM card
VOXELL works with a SIM card that must be activated by
GSM/GPRS/3G operator. The SIM card must be configured before it
is inserted into the VOXELL slot. For configuring the SIM card use a
GSM cellphone.
Available configurations:
PIN CODE REQUEST – if is disabled (from mobile phone
menu) PIN CODE REQUEST security option, then will not ask to
introduce it. Alternatively, the PIN code can be enabled and you
have two possibility for entering it:
1. dial PIN code from fixed phone, connected to VOXELL
2. use the configuring program - Operating, Administration
and Maintenance program (delivery on CD)
If you use the second variant and the PIN code is entered by you,
then it will be stored by the equipment.
! If the „Change PIN Code” is enable, VOXELL will generated a new PIN
Code, unknown for user, so we recommend you disable this option.
Disable GSM services – GSM operators offers you different
supplementary services for calls (divert calls, vocal messages).
When you use the VOXELL interface is recommended that these
options to be disable, because they are available only with cost.
Disable Roaming – is required to disable the roaming services
because VOXELL was designed for working with stationary PXS
exchange.
