Rocket Fish RF-WFD301 Manual de usuario

Rocketfish Miracast Video Receiver | RF-WFD301

USER GUIDE

Before using your new product, please read these instructions to prevent any damage.

12-1245_RF-WFD301_MAN_V1_EN.fm Page 1 Tuesday, June 4, 2013 10:36 AM

Rocketfish RF-WFD301

Miracast Video Receiver

Contents

Introduction .................................................................................................. 2

Features........................................................................................................... 5

Installing the wireless video receiver ................................................... 7

Setting up your receiver connection.................................................... 8

Changing the configuration.................................................................... 9

Disconnecting a Miracast mobile device..........................................11

Updating the firmware ............................................................................11

Troubleshooting ........................................................................................13

Specifications..............................................................................................14

Legal notices ...............................................................................................14

One-Year Limited Warranty....................................................................17

Introduction

Your RF-WFD301 Miracast Video Receiver uses a wireless

communication system to transmit high quality video and audio to

your TV from your mobile device, such as a smartphone or tablet.

12-1245_RF-WFD301_MAN_V1_EN.fm Page 2 Tuesday, June 4, 2013 10:36 AM

3Rocketfish Miracast Video Receiver | RF-WFD301

Safety information

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

CAUTION:

TO REDUCE THE RISK OF

ELECTRIC

SHOCK, DO NOT REMOVE

COVER

(OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an

equilateral triangle is intended to alert the user to the

presence of uninsulated dangerous voltage within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

12-1245_RF-WFD301_MAN_V1_EN.fm Page 3 Tuesday, June 4, 2013 10:36 AM

7) Do not block any ventilation openings. Install in accordance with

the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9) Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with one

wider than the other. A grounding type plug has two blades and a

third grounding prong. The wide blade or the third prong are

provided for your safety. If the provided plug does not fit into your

outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Unplug this apparatus during lightning storms or when unused

for long periods of time.

13) Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been

dropped.

12-1245_RF-WFD301_MAN_V1_EN.fm Page 4 Tuesday, June 4, 2013 10:36 AM

5Rocketfish Miracast Video Receiver | RF-WFD301

Features

• High Resolution-Supports up to 1080p resolution to ensure crisp,

detailed visuals

• Wireless Signal-Stream content from your Android phone or tablet

to your TV through walls and doors over 50 feet, without cables or

a network connection

• Many entertainment options-Stream movies, photos, web

content, music, and other content from your compatible Android

device to your TV (requires a USB power source, not included)

• Leading-edge technology-Miracast technology works well across

Android 4.2.1 and newer devices, regardless of brand

Package contents

Examine the contents of the box for your RF-WFD301 Miracast Video

Receiver. The box should contain:

• Rocketfish Miracast Video Receiver

• 6” HDMI adapter

• 30” Micro USB charger cable

•QuickSetupguide

System requirements

• A digital TV with an HDMI jack and a USB port

• A Miracast enabled mobile device with Android™ Jellybean 4.2.1

or newer

12-1245_RF-WFD301_MAN_V1_EN.fm Page 5 Tuesday, June 4, 2013 10:36 AM

Rocketfish Miracast video receiver

#Feature

1 HDMI connector

2WPS button

3MicroUSBjack

4Reset button

5 HDMI adapter cable

6Standard USB connector

7MicroUSBconnector

12-1245_RF-WFD301_MAN_V1_EN.fm Page 6 Tuesday, June 4, 2013 10:36 AM

7Rocketfish Miracast Video Receiver | RF-WFD301

Installing the wireless video receiver

To install your wireless video receiver:

1Turn off the TV.

2Insert the Rocketfish Miracast Video Receiver into the HDMI port

on your TV. If the video receiver will not fit into the HDMI port on

your TV (too large or too wide), use the 6" HDMI adapter for a

better fit.

3Insert the micro USB connector into the micro USB port on the

receiver. Insert the other end into the USB port on your TV. If the

TV does not have a USB port, use a powered USB charger (not

included).

4Turn on your TV, then press the TV’s Input or Source button to

select the HDMI input that the Rocketfish Miracast Video Receiver

is connected to.

5The LED on the Rocketfish Miracast Video Receiver starts to blink

and the boot up splash screen is displayed within 30 seconds. If

the LED doesn’t blink or the boot up splash screen is not seen,

check to make sure that the TV input you have selected is correct

and the Rocketfish Miracast Video Receiver has power and is

firmly connected to the TV.

12-1245_RF-WFD301_MAN_V1_EN.fm Page 7 Tuesday, June 4, 2013 10:36 AM

Setting up your receiver connection

When used for the first time, the Rocketfish Miracast Video Receiver

starts in Auto mode and is ready to accept a Wi-Fi direct connection.

To set up your receiver connection:

1Make sure that the TV or projector screen shows the Rocketfish

Miracast Video Receiver screen.

2On your Miracast mobile device, such as a smartphone or tablet,

turn on the Wi-Fi network.

3On your Miracast mobile device, select the SSID (network name)

that is displayed on your TV. See the documentation that came

with your Miracast mobile device to complete the setup.

4Press the WPS button on the Rocketfish Miracast Video Receiver.

The blue LED will start to blink while the receiver searches for a

connection.

5When the connection is successful, your Miracast mobile device's

screen is displayed on your TV, indicating that video streaming

has started.

Note: To re-connect a device that has been previously connected, repeat steps 1-5.

12-1245_RF-WFD301_MAN_V1_EN.fm Page 8 Tuesday, June 4, 2013 10:36 AM

9Rocketfish Miracast Video Receiver | RF-WFD301

Changing the configuration

If your TV has HDMI CEC support, you can use your TV remote control

to change the default settings on the Rocketfish Miracast Video

Receiver.

Note: The default settings for your Rocketfish Miracast Video Receiver work in most

scenarios. It's recommended that these settings only be changed by advanced users

with an understanding of this technology.

To change the configuration:

1Make sure that CEC is supported on your TV and is enabled.

Note: CEC may be called something different on your TV. See the documentation

that came with your TV for more information.

2Press the TV’s Input or Source button to select the HDMI input

that the Rocketfish Miracast Video Receiver is connected to.

3Point the remote control at the Rocketfish Miracast Video

Receiver, then use the arrow buttons to select the SETTINGS icon

in the Rocketfish Miracast Video Receiver’s menu to enter the

configuration screen.

4On the configuration screen, you can modify the following

options:

•Mode–

Auto mode

• In Auto mode, the Rocketfish Miracast Video Receiver

displays its SSID on screen, waits for, and then accepts a

Wi-Fi direct connection from a Miracast mobile device,

such as a smartphone or tablet. This mode will enable auto

P2P discovery on the Rocketfish Miracast Video Receiver.

• Use Auto mode for a Google Nexus4 cell phone.

Server mode

• In Server mode, the Rocketfish Miracast Video Receiver

displays its SSID on screen, waits for, and then accepts a

Wi-Fi direct connection from a Miracast mobile device such

as a smartphone or tablet.

• Use Server mode for nVidia Tegra 3 tablets.

12-1245_RF-WFD301_MAN_V1_EN.fm Page 9 Tuesday, June 4, 2013 10:36 AM

Client mode

• In Client mode, a new menu is displayed on screen to show

available Miracast source devices that the Rocketfish

Miracast Video Receiver has detected. Use the arrow keys

on your TV remote control to move to the Miracast mobile

device you want to connect to, then press ENTER. Make

sure that your Miracast mobile device is in Server mode

and is ready to accept a connection initiated by the

Rocketfish Miracast Video Receiver.

• Use Client mode for Asus Tegra3 – Miracast-enabled

tablets.

•Wi-Fi band–Select to operate on the 2.4GHz band or the 5GHz

band. Your Rocketfish Miracast Video Receiver defaults to

5GHz.

•Persist–Select to retain or discard settings when your

Rocketfish Miracast Video Receiver powers off and on.

•HDCP–Select Unlock, 2.0 or 2.1. HDCP protects the digital

rights of content owners. Your Rocketfish Miracast Video

Receiver defaults to 2.0.

•HDCP Legacy–Select ON or OFF. Your Rocketfish Miracast

Video Receiver defaults to off.

•Sys Info.–View your Rocketfish Miracast Video Receiver's

system information.

12-1245_RF-WFD301_MAN_V1_EN.fm Page 10 Tuesday, June 4, 2013 10:36 AM

Otros manuales para RF-WFD301

Tabla de contenidos

Otros manuales de Receptor de Rocket Fish

Rocket Fish

Rocket Fish RF-BTR315 Manual de usuario

Rocket Fish

Rocket Fish RF-WFD301 Manual de lista de piezas

Rocket Fish

Rocket Fish RF-WFD301 Manual de usuario

Rocket Fish

Rocket Fish RF-RBAUX Manual de usuario

Rocket Fish

Rocket Fish RF-RBUSB Guía de inicio rápido

Rocket Fish

Rocket Fish RF-RBAUX Manual de usuario

Rocket Fish

Rocket Fish RF-RBAUX Manual de usuario

Rocket Fish

Rocket Fish RF-RBKIT Manual de usuario

Rocket Fish

Rocket Fish RF-RBAUX Manual de usuario

Rocket Fish

Rocket Fish RF-RBREC Manual de usuario

Rocket Fish

Rocket Fish RF-BTR212 Manual de instalación y operación

Rocket Fish

Rocket Fish RF-BTR212 Manual de lista de piezas

Rocket Fish

Rocket Fish RF-BTR-319 Manual de usuario

Rocket Fish

Rocket Fish RF-WHD210 Guía de inicio rápido

Rocket Fish

Rocket Fish RF-RBAUX Manual de usuario

Rocket Fish

Rocket Fish ROCKETBOOST RF-RBREC Manual de usuario

Rocket Fish

Rocket Fish RF-RBAUX Manual de usuario

Rocket Fish

Rocket Fish RF-WFD301 Manual de instalación y operación

Rocket Fish

Rocket Fish RF-RBKIT Manual de usuario

Rocket Fish

Rocket Fish RF-BTR315 Manual de usuario

Rocket Fish

Rocket Fish RF-WFD301 Manual de usuario

Rocket Fish

Rocket Fish RF-RBREC Manual de usuario

Rocket Fish

Rocket Fish RF-WHD210 Guía de inicio rápido

Rocket Fish

Rocket Fish RF-RBUSB Manual de usuario

Manuales populares de Receptor de otras marcas

Garmin

Garmin GA 23 Manual de usuario

Aiphone

Aiphone PS-12F Manual de usuario

IMES

IMES TCS-01CA-PMI Manual de usuario

BWI Eagle

BWI Eagle AIR-EAGLE SR Manual

AMIMON

AMIMON AMN12310 WHDI Manual de usuario

Dual

Dual DMCPA79BT Instrucciones de funcionamiento

Sound Associates

Sound Associates SA652P Manual de usuario

Sherwood

Sherwood NewCastle R-772 Manual de usuario

Audio

Audio A10-RX Series Manual de usuario

AllSee

AllSee PushShare PSRV1.1 Manual de usuario

DEMAG

DEMAG DRC-DR D2 Manual de usuario

Teleco

Teleco TVRCL868A02 Manual de usuario

Bosch

Bosch RF3222E Manual de usuario

Kramer

Kramer 631R Manual de usuario

Xpress

Xpress xmc10 Manual de usuario

JVC

JVC KD-MR1BTS Manual de usuario

Omega Engineering

Omega Engineering UWTC-REC3 Manual de usuario

e-survey

e-survey E300 Pro Manual de usuario