Robin HV Manual de usuario
Manual
Robin HV / Robin CV
Software version 3 or higher
Version: 3.0.1 Eng
Date: 29-07-2014
gf1
1
Manual Robin HV / Robin CV ENG - v. 3.0.1
gf2
2
Manual Robin HV / Robin CV ENG - v. 3.0.1
About this manual
This manual describes mounting, installation and programming of the Robin HV and the Robin CV.
The Robin HV and the Robin CV both have unique specifications and functions. These functions will
be marked as Robin HV or Robin CV only.
This manual is intended for software version 3.0.0 and higher. You can update the software of
the Robin HV or Robin CV to the latest version. For instructions on updating see page 55 of this
manual.
This manual applies to Robin HV and Robin CV devices with part no.: C01400, C01410 and
C01300.
If you have any questions after reading this manual, please contact us
at:
website: www.robin.nl
support website: support.robin.nl
e-mail: [email protected]
phone: + 31 72 534 64 26
Robin Telecom Development
The Robin HV and Robin CV are the newest additions to the product portfolio of Robin Telecom
Development. It has the same quality and ease of use as the Robin SmartView door phone.
They all share the integration of the SIP protocol for video and audio in one device. That makes
these cameras unique. They combine advanced camera features with full phone functionality and
can be connected to almost every SIP telephony environment available.
We are aware that the latest IP technology offers many possibilities.
As a result, we continually strive to modernise our IP products based on feedback we receive from
our customers.
The Robin HV and the Robin CV are a logical development of the Robin SV.
gf3
3
Manual Robin HV / Robin CV ENG - v. 3.0.1
Table of Contents
1 Introduction 5
1.1 Robin HV and Robin CV 5
2. Mounting the Robin HV 8
2.1 Box contents 8
2.2 Installation dimensions 8
2.3 Tools and materials required for mounting 9
2.4 Mounting instructions 9
2.5 Connecting the Robin HV 10
3 Mounting the CV 11
3.1 Box contents 11
3.2 Dimensions 11
3.3 Tools and materials required for mounting 12
3.4 Mounting instructions 12
3.5 Connecting the Robin CV 13
4 System installation 14
4.1 Requirements prior to installation 14
4.2 Connecting the Robin to a network 14
5 Configuration 16
5.1 Logging in to the Robin CV or Robin HV 16
5.2 Configuration of the Robin CV and Robin HV 18
5.2.1 Telephony 19
5.2.1.1 Telephony / SIP 19
5.2.1.2 Telephony / Phonebook 22
5.2.1.3 Telephony / Call settings 25
5.2.1.4 Telephony / Call log 27
5.2.1.5 Telephony / Control 28
5.2.2 Audio 29
5.2.2.1 Audio / Settings 29
5.2.2.2 Audio / Detection 30
5.2.3 Video 31
5.2.3.1 Video / Live 31
5.2.3.2 Video / H.264 32
5.2.3.3 Video / Settings 32
5.2.3.4 Video / AGC 35
5.2.3.5 Video / Overlay 36
5.2.3.6 Video / Motion 37
gf4
4
Manual Robin HV / Robin CV ENG - v. 3.0.1
5.2.4 Network 38
5.2.4.1 Network / Status 38
5.2.4.2 Network / Settings 39
5.2.4.3 Network / HTTP 41
5.2.4.4 Network / Mail 42
5.2.4.5 Network / NAT 44
5.2.4.6 Network / RTSP 45
5.2.5 System 46
5.2.5.1 System / Device 46
5.2.5.2 System / Clock 48
5.2.5.3 System / Events 49
5.2.5.4 System / Security 52
5.2.5.5 System / Recording 53
5.2.5.6 System / Schedules 54
5.2.5.7 System / Software 55
5.2.5.8 System / Streams 56
5.2.5.9 System / Switch 57
5.2.5.10 System / Info 59
5.2.5.11 System / Debug 60
5.2.5.12 System / Logs 62
6 Support 63
7 List of key words 64
gf5
5
Manual Robin HV / Robin CV ENG - v. 3.0.1
1 Introduction
1.1 Robin HV and Robin CV
Integrated functions
The Robin HV and the Robin CV are unique cameras. They are not only equipped with all modern
IP camera functionality, but they also feature the SIP protocol for full phone functionality. The
cameras are capable of initiating and answering phone calls, so making video calls between the
camera and a video capable phone are easy. The highlights of the cameras are:
Telephone device with audio and video SIP support
High-Definition, full-color camera with a 70 degree lens for the Robin CV and a wide-angle
lens for the Robin HV
The HV is equipped with 4 hardware input contacts
Advanced event mechanism
Security camera with movement- and audio detection
Free programmable warning LED
Remote controllable and configurable through HTTP-commands
RTSP streaming (audio and video)
Easy to install
The Robin HV can be easily mounted in a dropped ceiling. With the addition of an optional
mounting case the camera can also be mounted to a wall or a conventional ceiling.
The Robin CV is equipped with a easy to use ceiling- / wall mount and can be fitted almost
everywhere.
SIP communication
The Robin SV uses the Session Initiation Protocol (SIP). This means that the entrance door unit
can be connected to any business telephone exchange (PBX) or VoIP devices that supports the SIP
protocol. To check compatibility please see the compatibility chart on the supplied USB drive or on
our support website: http://support.robin.nl.
Relay switches
The embedded potential free relay switches Robin CV (1x) and Robin HV (2x) can be used to
switch external hardware. The switches can be used to open a door, a gate or a barrier, switch
lights, external ringers etc.
gf6
6
Manual Robin HV / Robin CV ENG - v. 3.0.1
Built-in phone
Both the Robin CV and Robin HV feature a built-in SIP phone. By using a VoIP provider or PBX that
supports the SIP protocol these cameras can setup calls or can be called using a (video)phone. A
real-time audio-video connection between the phone and the camera can established that way. The
Robin cameras feature build-in speakers and microphones to make two way audio possible.
High-Definition video quality
The build-in camera of the Robin CV and Robin HV is capable of displaying the video image in
High-Definition (introduced in software version 3). The image can be set to an aspect ratio of 4x3
or 16x9.
High-quality sound reproduction
The integrated concept means that there are no ‘converters’ which distort sound quality.
Consequently, the Robin CV and Robin HV offer exceptionally good sound quality, without echo or
interference.
The audio of the Robin CV and Robin HV can also be configured as ‘half duplex’ , which will boost
the volume output and the microphone sensitivity.
Security camera function
The built-in security camera is a unique feature of the Robin. The built-in camera in the Robin
operates as a simple camera, allowing you to see who is at the door.
However, it can also function as a security camera. When the Robin detects movement, it starts to
record the video image and sound. In the event of a break-in (or attempted break-in), this feature
provides perfect video registration of the perpetrators.
No separate power supply
The Robin CV and Robin HV are both powered via ’Power-over-Ethernet‘ (PoE IEEE 802.3af).
This eliminates the need for a separate power supply; connection to a PoE network switch or
Midspan is all that is necessary.
gf7
7
Manual Robin HV / Robin CV ENG - v. 3.0.1
Web-based configuration
The Robin CV and Robin HV can be configured on a PC or Mac via a web browser (e.g. Firefox,
Chrome, Safari). Using a web browser, modification of all the settings for the Robin is easy,
regardless of the physical location of the Robin. You can also watch the live video image of the
Robin.
Compatible with WEBRelay
The Robin CV and Robin HV are compatible with an external IP relays, the WEBRelay Quad-LS.
This external device is equipped with 4 build-in relays and can be connected to the LAN.
The ‘Events’ mechanism in the Robin can control the 4 relays (page. 42).
Four build-in hardware inputs
The Robin HV features four separate hardware inputs. You can connect external triggers, such as:
fire alarms, panic buttons, external sensors etc.
gf8
8
Manual Robin HV / Robin CV ENG - v. 3.0.1
2. Mounting the Robin HV
2.1 Box contents
The Robin HV
USB stick with the manuals and the ‘Robin Discovery Utility’ software
Anti-theft Allen key
Tool for adjusting the focus
2.2 Installation dimensions
The installation dimensions of the Robin HV are:
gf9
9
Manual Robin HV / Robin CV ENG - v. 3.0.1
2.3 Tools and materials required for mounting
The following are required when mounting the Robin HV:
Core drill, 152 mm in diameter
Anti-theft Allen key (supplied)
2.4 Mounting instructions
Follow the step-by-step plan described below for problem-free mounting of the Robin HV.
Step-by-step plan:
1. Remove the ceiling plate that will be used for mounting the Robin HV from the ceiling
2. Using the core drill, drill a hole in the ceiling plate
3. Check if the housing of the Robin HV fits the hole in the ceiling plate
4. Fit the modified ceiling plate back in the ceiling and make sure the Ethernet cable can be
reached through the hole
5. Connect the Ethernet cable to the Robin HV.
6. Optional - Connect the cables of: the relay contacts and the external inputs
7. Mount the Robin HV in the ceiling plate
8. Tighten the anti theft screws with the supplied Allen-key. The Robin HV has a build-in
system that will tighten the unit in the ceiling plate. Tighten every screw until you notice that
the unit grips in the ceiling plate
After mounting the Robin HV it can be necessary to optimise the focus of the video image.
Do this by turning the lens. For your convenience you can use the supplied focus adjustment tool.
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Manuales populares de Sistema de seguridad de otras marcas
EDM
EDM Solution 6+6 Wireless-AE Manual de usuario
Highway Safety Group
Highway Safety Group EA401 Manual de usuario
Siren
Siren LED GSM Manual de usuario
Detection Systems
Detection Systems 7090i Instrucciones de montaje
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manual de usuario
Siemens
Siemens FDM273 Manual de usuario