Robin SIP Manual del propietario

Version: Robin_SV_1.0 ENG

Datum: 07-04-2015

TECHNICAL INSTRUCTION:

REPLACEMENT SD-CARD

TECHNICAL

INSTRUCTION

Replacement SD-card

Robin SIP / SV

TECHNICAL INSTRUCTION

REPLACEMENT SD-CARD

ROBIN SIP / SV

version Robin_SV_1.0_ENG (07-04-2015)

Page 2

This document

This document describes the steps needed to replace the build-in SD-card of a Robin SIP or Robin SV

for a new one.

After replacement of the SD-card the settings are set back to factory defaults. The Robin needs to be

re-conﬁgured. By default the network settings are set to DHCP.

TECHNICAL INSTRUCTION

REPLACEMENT SD-CARD

ROBIN SIP / SV

version Robin_SV_1.0_ENG (07-04-2015)

Page 3

Preperation

Make sure the work environment is clean and ESD safe.

Necessary tools

To remove the back of the Robin SIP or Robin SV you’ll need the following tools:

• Cap screwdriver, size 5.5

Necessary parts

• Programmed SD-card, type Sandisk 8GB Class 10

TECHNICAL INSTRUCTION

REPLACEMENT SD-CARD

ROBIN SIP / SV

version Robin_SV_1.0_ENG (07-04-2015)

Page 4

Necessary tools and parts

Aantal Omschrijving Foto(s)

1 Robin SIP / SV

1 Programmed Sandisk SD-

card

1 Cap screwdriver, size 5.5

TECHNICAL INSTRUCTION

REPLACEMENT SD-CARD

ROBIN SIP / SV

version Robin_SV_1.0_ENG (07-04-2015)

Page 5

Removal of the back

Place the Robin on its front, on a clean surface.

• Unscrew the six nuts on the back.

• Remove the back of the Robin.

TECHNICAL INSTRUCTION

REPLACEMENT SD-CARD

ROBIN SIP / SV

version Robin_SV_1.0_ENG (07-04-2015)

Page 6

Removal of the old SD-card en placement of the new SD-card

• Keep the Robin on its side, so you can see the SD-card (above the connectors)

• Unlock the SD-card by pressing on the card (the card pops out of the holder)

• Remove the SD-card

• Place the new (Sandisk) SD-card in the SD-card holder. It will click in place.

! Note: The SD-card will only ﬁt in the SD-card holder with the text upward !

TECHNICAL INSTRUCTION

REPLACEMENT SD-CARD

ROBIN SIP / SV

version Robin_SV_1.0_ENG (07-04-2015)

Page 7

Replacing the back

Place the Robin on its front, on a clean surface.

• Place the back on the Robin

• Screw the six bolts back in place

After reconnecting the Robin it will boot with factory default settings.

Otros manuales para SIP

Este manual sirve para los siguientes modelos

Otros manuales de Sistema de intercomunicación de Robin

Robin

Robin SV Series Manual de usuario

Robin

Robin Compact Manual de usuario

Robin

Robin SmartView SIP Manual de usuario

Robin

Robin SlimLine Manual de usuario

Robin

Robin Compact SIP Manual de usuario

Robin

Robin SmartView SIP Manual de usuario

Robin

Robin Robin SmartView Manual de usuario

Robin

Robin SIP Manual del propietario

Manuales populares de Sistema de intercomunicación de otras marcas

Bticino

Bticino LINEA 3000 Manual de usuario

MSI

MSI MSI-140 Manual de usuario

golmar

golmar Stadio Plus Manual de usuario

CyberData

CyberData 011211 series Manual

Vidos

Vidos duo M1021 Manual de usuario

Vimar

Vimar ELVOX 7539/E Manual de usuario

SSS Siedle

SSS Siedle BTSV 850-03 Manual de usuario

Dahua

Dahua VTO Series Manual de usuario

Elvox

Elvox 5651 Manual de usuario

Videx

Videx VIDEOKIT Series Manual de usuario

Rocom

Rocom Doortello Business FW T2.05W2.04 Manual de usuario

Viking

Viking E-35-EWP Manual de usuario

Safeguard Supply

Safeguard Supply LRA-EX1000 Manual de usuario

SSS Siedle

SSS Siedle BFCV 850 Series Manual de usuario

GRD

GRD MAX V2 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Aiphone

Aiphone IE-8MD Manual de usuario

Perel

Perel EDB4 Manual de usuario