Robe Robin miniPointe Manual de usuario

Version1.4

Table of contents

1. Safety instructions ......................................................................................................... 3

2. Fixture exterior view ...................................................................................................... 5

3. Installation....................................................................................................................... 6

3.1 Connection to the mains ............................................................................................ 6

3.2 Changing the lamp ..................................................................................................... 7

3.3 Lamp adjustment ....................................................................................................... 8

3.4 Rigging the xture .................................................................................................... 10

3.5 DMX-512 connection................................................................................................ 12

3.6 Wireless DMX operation .......................................................................................... 13

3.7 Replacing colour lters............................................................................................. 14

4. Remotely controllable functions................................................................................. 15

5. Control menu map........................................................................................................ 16

6. Control menu ............................................................................................................... 19

6.1 Addressing (DMXA).................................................................................................. 19

6.2 Fixture information (Info) .......................................................................................... 19

6.3 Personality (Pers)..................................................................................................... 20

6.4 Lamp on/o󰀨 (Lamp).................................................................................................. 21

6.5 Manual Control (Manual).......................................................................................... 21

6.6 Test program (Test Prg)............................................................................................ 22

6.7 Stand-alone (St Alone) ............................................................................................. 22

6.8 Reset (Reset) ........................................................................................................... 23

6.9 Special functions (Special)....................................................................................... 23

7. RDM ............................................................................................................................... 25

8. Error and information messages ................................................................................ 26

9. Technical Specications.............................................................................................. 28

10. Maintenance and cleaning......................................................................................... 31

11. ChangeLog ................................................................................................................. 31

Robin miniPointe

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOU INITIAL START - UP

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to en-

sure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes

written in this manual.

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this

manual or any unauthorized modication to the device.

Please consider that damages caused by manual modications to the device are not subject to warranty.

The Robin miniPointe was designed for indoor use and it is intended for

professional application only. It is not for household use.

1. Safety instructions

CAUTION!

Disconnect the xture from mains before you remove any cover of the xture.

With a high voltage you can suer a dangerous electric shock when touching

alive wires and electrical parts under covers!

Make sure that the available voltage is not higher than stated on the rear panel of the xture.

This xture should be operated only from the type of power source indicated on the marking label. If you are

not sure of the type of power supplied, consult your authorized distributor or local power company.

Always disconnect the xture from AC power before cleaning, removing or installing the fuses, or any part.

The power plug has to be accessible after installing the xture. Do not overload wall outlets and extension cords

as this can result in re or electric shock.

Do not allow anything to rest on the power cord. Do not locate this xture where the cord may be damaged by

persons walking on it.

Make sure that the power cord is never crimped or damaged by sharp edges. Check the xture and the power

cord from time to time.

Refer servicing to qualied service personnel.

This xture falls under protection class I. Therefore this xture has to be connected to

a mains socket outlet with a protective earthing connection.

Do not connect this xture to a dimmer pack.

During the initial start-up some smoke or smell may arise. This is a normal process and does not necessarily

mean that the device is defective.

Do not touch the device’s housing bare hands during its operation (housing becomes hot)!

For replacement use lamps and fuses of same type and rating only.

CAUTION ! EYE DAMAGES !

Avoid looking directly into the light source!

If the xture has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on

immediately. The arising condensation water might damage your device. Leave the device switched o󰀨 until

it has reached room temperature.

Do not shake the xture. Avoid brute force when installing or operating the xture.

This xture was designed for indoor use only, do not expose this unit to rain or use near water.

When choosing the installation spot, please make sure that the xture is not exposed to extreme heat, moisture

or dust.

Air vents and slots in the xture´s head and base are provided for ventilation, to ensure reliable operation of

the device and to protect it from overheating.

Do not block the front objective lens with any object when the xture is under operation.

The openings should never be covered with cloth or other materials, and never must be blocked.

The xture becomes very hot during operation. Allow the xture to cool approximately 20 minutes prior to ma-

nipulate with it.

Before switching the xture OFF, turn the lamp OFF and allow the xture to cool for a while.

This xture should not be placed in a built-in installation unless proper ventilation is provided.

Only operate the xture after having checked that the housing is rmly closed and all screws are tightly fastened.

Always use a secondary safety cable when mounting this xture.

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the xture.

Warning

The minimum distance between light output and the illuminated surface must be more

than 5 meters.

The maximum ambient temperature 45°C must never be exceeded.

CAUTION!

The front lens has to be replaced when it is obviously damaged,

so that its function is impaired, e. g. due to cracks or deep scratches!

Operate the device only after having familiarized with its functions. Do not permit operation by persons not

qualied for operating the device. Most damages are the result of unprofessional operation!

CAUTION!

The lamp has to be replaced when it is damaged

or deformed due to the heat!

Please use the original packaging if the device is to be transported.

CAUTION!

Fast on-o-cycles (e.g. 10 min. on / 10 min. o) will reduce lamp life.

CAUTION!

To avoid damage of the internal parts of the xture head, never let the sunlight lights

directly to the front lens , even when the xture is not working !

2. Fixture exterior view

Rear panel of the base:

1 - 5-pin DMX Out

2 - Power Out

3 - 5-pin DMX In

4 - Power In

Front panel of the base:

1 - Display

2 - ESCAPE button

3 - ENTER button

4 - NEXT button

5 -PREV button

The head should be locked for transportation- the tilt lock (2) and the pan lock (3) have to be in the locked

positions. To unlock the head, move these latches to unlock positions before operating the xture.

1 - Front lens

2 - Tilt lock

3- Pan lock

4- Base

5- Moving head

6 - Arm

The ENTER/DISPLAY ON button also serves for switching the display on when the xture is disconnected

from the mains.

3. Installation

Fixtures must be installed by a qualied electrician in accordance with all

national and local electrical and construction codes and regulation.

3.1 Connection to the mains

For protection from electric shock, the xture must be earthed!

The Robin miniPointe is equipped with auto-switching power supply that automatically adjusts to any 50-60Hz

AC power source from 100-240 Volts.

This xture must be earthed. To use the xture, a plug must be xed.

The correct assembly of a su󰀩cient plug may be done by professional persons only.

The conductors in the cable are marked by the following table.

Core (EU) Core (US) Connection Plug Terminal Marking

Brown Black Live L

Light blue White Neutral N

Green /Yellow Green Earth

Design of the Robin miniPointe allows to connect several xtures to AC mains power in one interconnected

daisy chain using power input and throughput connectors. Needed daisy chain cords are stated in the chapter

“Technical specications “

The max. number of connected xtures depends on the AC mains power voltage and xture version:

EU version (CE) US version (cETLus)

15 xtures at power supply= 230V 9 xtures at power supply= 230V

13 xtures at power supply= 208V 7 xtures at power supply= 208V

7 xtures at power supply= 120V 5 xtures at power supply= 120V

Do not overload the supply line and the connecting leads.

Wiring and connection work must be carried out by qualied sta󰀨!

3.2 Changing the lamp

DANGER !

Install the lamp with the xture unplug from mains !

To insert the new lamp.

1. Disconnect the xture from mains and allow it to cool at least 20 minutes.

2. .Loosen the two quarter-turn fasteners (1) on a lamp cover and remove the lamp cover (2) to get into lamp

compartment.

3. Remove both Fastons (3) from at blades of the lamp.

4. Holding the lamp by its ceramic base (4), carefully pull the lamp outwards until you break force of

spring locks (5) keeping the lamp in the lamp compartment.

5 Holding the new lamp by its ceramics base (4), gently insert the lamp into lamp compartment until it snaps

into spring locks (5).

Do not install a lamp with a higher wattage! A lamp like this generates temperatures the device is not de signed

for. Damages caused by non-observance are not subject to warranty. Please follow the lamp manufacturer‘s

notes!

Warning: do not touch the lamp’s envelope with bare hands. Should this happen, clean the bulb with a cloth

soaked in alcohol and dry it

6. Slide both Fastons (3) onto lamp blades and check this connection

. Re-insert the lamp cover (2) and tighten the two quarter-turn

fasteners (1) .

8. Connect the xture to the mains.

9. Reset the "Lamp On Time” and "Lamp Strikes” counters

in the menu "Information”.

Never operate this xture without the lamp!

Do not operate this xture without the lamp cover!

3.3 Lamp adjustment

The lamp holder is aligned at the factory. Due to di󰀨erences between lamps,the ne adjustment may improve

light performance.

For lamp adjustment serve four slots in the lamp assembly.

Slots A - for adjustment of the lamp horizontally

Slots B - for adjustment of the lamp vertically

To adjust the lamp in the xture.

Connect the xture to the mains, switch on the lamp, open shutter and dimmer, set focus (Static

gobo wheel should be set at 0 DMX) and check the image on the wal

2. Disconnect the xture from mains.

3. .Loosen two quarter-turn fasteners (1) on a lamp cover and remove the lamp cover (2) to get into lamp

compartment.

4. Move the lamp into desired position by using a suitable screwdriver inserted in the appropriate slots (A, B).

Re-insert the lamp cover (2) and tighten the two quarter-turn

fasteners (1) .

6. Connect the xture to the mains and check if the adjustment has been correctly made.

7. If you need to continue in adjusting,

disconnect the xture from mains and repeat steps 2-5.

The lamp must be adjusted with the xture disconnected from mains!

Do not operate this xture without the lamp cover!

Note: Due to light refraction in the xture, the lamp has to be moved into direction of shifted hot-spot - see

pictures below.

3.4 Rigging the xture

A structure intended for installation of the xture (s) must safely hold weight of the xture(s) placed on it. The

structure has to be certicated to the purpose.

The xture (xtures) must be installed in accordance with national and local electrical and construction codes

and regulation.

For overhead installation, the xture must be always secured with a safety wire

When rigging, derigging or servicing the xture staying in the area below the installation place, on bridges,

under high working places and other endangered areas is forbidden.

The operator has to make sure that safety-relating and machine-technical installations are approved by an

expert before taking into operation for the rst time and after changes before taking into operation another time.

The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled

person once a year.

Allow the xture to cool for ten minutes before handling.

The projector should be installed outside areas where persons may walk by or be seated.

IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating working

load limits, installation material being used, and periodic safety inspection of all installation material and the

projector. If you lack these qualications, do not attempt the installation yourself, but use a help of professional

companies.

CAUTION: Fixtures may cause severe injuries when crashing down! If you have doubts concerning the safety

of a possible installation, do not install the xture!

The xture has to be installed out of the reach of public.

The xture must never be xed swinging freely in the room.

Danger of re!

When installing the device, make sure there is no highly inammable

material (decoration articles, etc.) in a distance of min. 0.5 m.

The special desing of the temperature lter has allowed to reduce distance betwen the

xture and lit objects, but the minimum distance of 5 meters between light output from

the moving head and the lit objects must be kept!

Caution!

Use 2 appropriate clamps to rig the xture on the truss.

Follow the instructions mentioned at the bottom of the base.

Make sure that the device is xed properly! Ensure that the

structure (truss) to which you are attaching the xtures is secure.

The xture can be placed directly on the stage oor or rigged in any orientation on a truss without altering its

operation characte ristics .

For securing a xture to the truss, install a safety wire that can hold at least 10 times the weight of the xture.

Use only the safety wire with screw-on carabine. Pull the safety wire through the safety attachment point on

the bottom of the base and around the truss as shown on the pictures below.

Tabla de contenidos

Otros manuales de Luminaria de Robe

Robe

Robe scan 1200 XT Manual de usuario

Robe

Robe onePATT Manual de usuario

Robe

Robe Robin 300E Spot Manual de usuario

Robe

Robe DigitalSpot 7000 DT Manual de usuario

Robe

Robe ClubWash 500 CT Manual de usuario

Robe

Robe Beam 250XT Manual de usuario

Robe

Robe clubspot 500 CT Manual de usuario

Robe

Robe ROBIN DL4S Manual de usuario

Robe

Robe Eminere 1 Manual de usuario

Robe

Robe Color Spot 575AT Manual de usuario

Robe

Robe ROBIN ParFect 150 Manual de usuario

Robe

Robe Ambiane Manual de usuario

Robe

Robe Robin 300 Plasma Wash Manual de usuario

Robe

Robe ANOLIS Eminere Inground 2 Manual de usuario

Robe

Robe Robin BMFL Blade Manual de usuario

Robe

Robe ROBIN T1 Fresnel Manual de usuario

Robe

Robe DJ SCAN 150 XT Manual de usuario

Robe

Robe Robin ProMotion ADM Manual de usuario

Robe

Robe Color Wash 750 AT Tungsten Manual de usuario

Robe

Robe Color Wash 2500E Manual de usuario

Robe

Robe Robin 600E Beam Manual de usuario

Robe

Robe ColorWash 575 AT ZOOM Manual de usuario

Robe

Robe Color Spot 575AT Manual de usuario

Robe

Robe ANOLIS Eminere Side 1 Manual de usuario

Manuales populares de Luminaria de otras marcas

Emos

Emos CLASSIC ZY1431T Manual de usuario

Westinghouse

Westinghouse Outdoor Lighting Fixture Manual de usuario

Hedler

Hedler C 12 silent Manual de usuario

Blizzard Lighting

Blizzard Lighting Puck: CSI Manual de usuario

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manual de usuario

Lightmaxx

Lightmaxx Shaft 5R Manual de usuario

Triarch

Triarch 31083 Manual de usuario

Philips

Philips 32614 Series Manual de usuario

IKEA

IKEA TIVED Manual de usuario

Lightolier

Lightolier LP200 Manual de usuario

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manual de usuario

Martin

Martin MAC 250 Krypton Manual de usuario

Cooper Lighting

Cooper Lighting Halo L3232E Manual de usuario

Stageline

Stageline ODW-2410RGBW Manual de usuario

Light Sky

Light Sky Tornado Series Manual de usuario

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manual de usuario

Lightolier

Lightolier Lytespan 83ED17S Manual de usuario

Lightolier

Lightolier Calculite CS8226 Manual de usuario