RKI Instruments M2A Manual de usuario

M2A Transmitter

Operator’s Manual

Part Number: 71-0305RK

Revision: R

Released: 3/10/21

www. .com information@itm.com1.800.561.8187

M2A Transmitter Operator’s Manual

WARNING

Read and understand this instruction manual before operating instrument.

Improper use of the gas monitor could result in bodily harm or death.

Periodic calibration and maintenance of the gas monitor is essential for proper

operation and correct readings. Please calibrate and maintain this instrument

regularly! Frequency of calibration depends upon the type of use you have and

the sensor types. Typical calibration frequencies for most applications are

between 3 and 6 months, but can be required more often or less often based on

your usage.

www. .com information@itm.com1.800.561.8187

M2A Transmitter Operator’s Manual

Product Warranty

RKI Instruments, Inc. warrants gas alarm equipment sold by us to be free from defects in materials,

workmanship, and performance for a period of one year from date of shipment from RKI Instruments, Inc. Any

parts found defective within that period will be repaired or replaced, at our option, free of charge. This warranty

does not apply to those items which by their nature are subject to deterioration or consumption in normal service,

and which must be cleaned, repaired, or replaced on a routine basis. Examples of such items are:

Warranty is voided by abuse including mechanical damage, alteration, rough handling, or repair procedures not

in accordance with the operator’s manual. This warranty indicates the full extent of our liability, and we are not

responsible for removal or replacement costs, local repair costs, transportation costs, or contingent expenses

incurred without our prior approval.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY AND ALL OTHER WARRANTIES

AND REPRESENTATIONS, EXPRESSED OR IMPLIED, AND ALL OTHER

OBLIGATIONS OR LIABILITIES ON THE PART OF RKI INSTRUMENTS, INC.

INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL RKI INSTRUMENTS,

INC. BE LIABLE FOR INDIRECT, INCIDENTAL, OR CONSEQUENTIAL LOSS OR

DAMAGE OF ANY KIND CONNECTED WITH THE USE OF ITS PRODUCTS OR

FAILURE OF ITS PRODUCTS TO FUNCTION OR OPERATE PROPERLY.

This warranty covers instruments and parts sold to users by authorized distributors, dealers, and representatives

as appointed by RKI Instruments, Inc.

We do not assume indemnification for any accident or damage caused by the operation of this gas monitor, and

our warranty is limited to the replacement of parts or our complete goods.

a) Absorbent cartridges d) Batteries

b) Pump diaphragms and valves e) Filter elements

c) Fuses

www. .com information@itm.com1.800.561.8187

M2A Transmitter Operator’s Manual

Table of Contents

Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

About the M2A Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Chapter 2: Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

External Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Internal Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Chapter 3: Installation & Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Mounting the M2A Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Wiring the M2A Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Start Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Chapter 4: Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Normal Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Information Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

4 - 20 mA Signal Output Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Alarm Indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Chapter 5: Configuration Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Viewing & Changing M2A Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Chapter 6: Gas Type Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Selecting the Gas Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

www. .com information@itm.com1.800.561.8187

M2A Transmitter Operator’s Manual

Chapter 7: Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Preventive Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Calibration Frequency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Calibration, Combustible Gas, CO2, and Toxic Versions . . . . . . . . . . . . . . . 50

Calibration, Oxygen Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Replacing Components of the M2A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Chapter 8: RS-485 Modbus Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Wiring the M2A in a Modbus System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Using the M2A in a 4-wire Modbus System. . . . . . . . . . . . . . . . . . . . . . . . . . 64

Modbus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Supported Modbus Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Chapter 9: Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Appendix A: Control Button Quick Reference Guide. . . . . . . . . . . . . . . . . . . . . . 76

Appendix B: PLC and DCS Device Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Appendix C: Function Code 16 Registers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

www. .com information@itm.com1.800.561.8187

6M2A Transmitter Operator’s Manual

Chapter 1: Introduction

Overview

This chapter briefly describes the M2A Transmitter. This chapter also describes the M2A Transmitter Operator’s

Manual (this document). Table 1 at the end of this chapter lists the specifications for the M2A.

About the M2A Transmitter

The M2A transmitter is a fixed mount, continuous-monitoring detector head. All user adjustable parameters may

be accessed using push button switches. In addition, calibration may be performed non-intrusively by use of a

magnetic wand accessory which activates magnetic switches through a window at the front face of the detector

head.

The M2A displays the current gas reading on an OLED display which is visible through the window in the cover

(front face) and provides a 4 - 20 mA signal which indicates the target gas reading for use by a gas monitoring

controller, recording device, or programmable controller. The M2A also provides an RS-485 Modbus output.

Three sets of relay contacts, two controlled by the gas alarms and one by the fail alarm, rated at 115 VAC 5 amps

are available for controlling devices such as lights or horns or for controlling higher rated relays.

Four operating modes allow you to display and change setup and calibration settings and change the gas type.

They are Calibration Mode, Configuration Mode, Gas Type Mode, and Modbus Mode.

About this Manual

The M2A Transmitter Operator’s Manual uses the following conventions for notes, cautions, and warnings.

NOTE: Describes additional or critical information.

CAUTION: Describes potential damage to equipment.

WARNING: Describes potential danger that can result in injury or death.

www. .com information@itm.com1.800.561.8187

M2A Transmitter Operator’s Manual 7

Specifications

Table 1 lists specifications for the M2A.

Table 1: M2A Specifications

Target Gas/

Detection Range

Combustible Gas/Carbon Dioxide (CO2)

• Catalytic LEL: 0 - 100% LEL, 1% LEL increments (CH4calibration unless otherwise

specified. H2specific detector available)

• Catalytic CH4ppm: 0 - 9000 ppm, 20 ppm increments

• IR (infrared) CH4LEL: 0 - 100% LEL, 1% LEL increments

• IR HC LEL: 0 - 100% LEL, 1% LEL increments (propane calibration)

•IRCH

4Volume: 0 - 5.00% volume, 0.01% increments

•IRCH

4Volume: 0 - 100 % volume, 1% increments

•IRCO

2ppm: 0 - 5,000 ppm, 20 ppm increments

•IRCO

2ppm: 0 - 10,000 ppm, 20 ppm increments

•IRCO

2Volume: 0 - 5.00 % volume, 0.01% increments

•IRCO

2Volume: 0 - 50.0 % volume, 0.1% increments

•IRCO

2Volume: 0 - 100 % volume, 1% increments

Oxygen

• Oxygen (O2): 0 - 25.0 % volume, 0.1% increments

CO/H2S

• Carbon Monoxide (CO): 0 - 300 ppm, 1 ppm increments

• Carbon Monoxide (CO): 0 - 200 ppm, 1 ppm increments

• Carbon Monoxide (CO): 0 - 100 ppm, 1 ppm increments

• Hydrogen Sulfide (H2S): 0 - 100 ppm, 1 ppm increments

• Hydrogen Sulfide (H2S): 0 - 50 ppm, 0.1 ppm increments

Tox ic

• Ammonia (NH3): 0 - 75.0 ppm, 0.1 ppm increments

• Ammonia (NH3): 0 - 100 ppm, 1 ppm increments

• Ammonia (NH3): 0 - 200 ppm, 1 ppm increments

• Ammonia (NH3): 0 - 500 ppm, 1 ppm increments

• Arsine (AsH3): 0 - 1.50 ppm, 0.01 ppm increments

• Chlorine (Cl2): 0 - 3.00 ppm, 0.01 ppm increments

• Chlorine (Cl2): 0 - 5.00 ppm, 0.01 ppm increments

• Chlorine (Cl2): 0 - 10.0 ppm, 0.1 ppm increments

• Chlorine Dioxide (ClO2): 0 - 1.00 ppm, 0.01 ppm increments

• Chlorine Dioxide (ClO2): 0 - 3.00 ppm, 0.01 ppm increments

• Chlorine Dioxide (ClO2): 0 - 5.00 ppm, 0.01 ppm increments

• Hydrogen Cyanide (HCN): 0 - 15.0 ppm, 0.1 ppm increments

• Phosphine (PH3): 0 - 1.00 ppm, 0.01 ppm increments

• Sulphur Dioxide (SO2): 0 - 6.00 ppm, 0.01 ppm increments

Alarm Settings

(Alarm 1/Alarm 2)*

Ammonia (0 - 75.0 ppm and 0 - 100 ppm): 12 ppm / 25 ppm

Ammonia (0 - 200 ppm): 25 ppm / 35 ppm

Ammonia (0 - 500 ppm): 35 ppm / 300 ppm

Arsine: 0.20 ppm / 0.50ppm

Carbon Dioxide (0 - 5,000 ppm): 2,500 ppm / 5,000 ppm

Carbon Dioxide (0 - 9,000 ppm): 2,000 ppm / 5,000 ppm

Carbon Dioxide (0 - 5.00%): 0.50 % / 3.00 %

Carbon Dioxide (0 - 50.0%): 50.0% / 50.0%

Carbon Dioxide (0 - 100%): 100% / 100%

www. .com information@itm.com1.800.561.8187

8M2A Transmitter Operator’s Manual

Alarm Settings

(Alarm 1/Alarm 2)*,

cont’d

Carbon Monoxide (all ranges): 25 ppm / 50 ppm

Chlorine (0 - 3.00 ppm): 0.50 ppm / 1.00 ppm

Chlorine (0 - 5.00 ppm): 0.50 ppm / 1.50 ppm

Chlorine (0 - 10.0 ppm): 1.0 ppm / 3.0 ppm

Chlorine Dioxide (0 - 1.00 ppm): 0.10 ppm / 0.30 ppm

Chlorine Dioxide (0 - 3.00 ppm): 0.30 ppm / 1.00 ppm

Chlorine Dioxide (0 - 5.00 ppm): 0.50 ppm / 1.00 ppm

Combustible Gas (%LEL): 10 %LEL / 50 %LEL

Combustible Gas (0-100%Volume): 100 % / 100 %

Hydrogen Cyanide: 5.0 ppm / 10.0 ppm

Hydrogen Sulfide (0 - 50 ppm): 5.0 ppm / 10.0 ppm

Hydrogen Sulfide (0 - 100 ppm): 10 ppm / 50 ppm

Methane (ppm): 5000 ppm / 8000 ppm

Methane (0-5.00%Volume): 0.5% / 2.5 %

Oxygen: 19.5% (decreasing) / 23.5% (increasing)

Phosphine: 0.10 ppm / 0.30 ppm

Sulphur Dioxide: 1.00 ppm / 2.00 ppm

Construction (housing) Explosion-proof Junction Box, NEMA 4X

Area Classification Explosion-proof for Class I, Groups B, C, and D (Combustible, CO2, CSA Type CO and H2S,

and CSA Type oxygen)

Sampling Method Diffusion

Input Power 10 - 30 VDC

Controls • Three push button switches

• Three magnetic switches for non-intrusive calibration

Weight 4.5 lbs.

Signal Output • 4 to 20 mA with impedance maximums listed below

-12 VDC input: 500 ohms impedance max

-24 VDC input: 1000 ohms impedance max

• RS-485 Modbus

Explosion Proof Non-Explosion Proof

Operating Temperature

Catalytic LEL/ppm -40°C to 75°C N/A

Oxygen -20°C to 45°C -20°C to 50°C

H2S-40°C to 40°C -40°C to 50°C

CO -5°C to 40°C -20°C to 50°C

Toxic (ESM-01) N/A -10°C to 40°C

Tox ic (CT-7 Seri es) N/A -20°C to 40°C

Infrared Combustible -20°C to 50°C -40°C to 50°C

Infrared CO2-20°C to 50°C -40°C to 50°C

Table 1: M2A Specifications

www. .com information@itm.com1.800.561.8187

M2A Transmitter Operator’s Manual 9

WARNING: When using the M2A, you must follow the instructions and warnings in this manual to

assure proper and safe operation of the M2A and to minimize the risk of personal injury. Be

sure to maintain and periodically calibrate the M2A as described in this manual.

Accuracy Catalytic Combustible Gas (LEL range):

± 5% of reading or ± 2% LEL (whichever is greater)

Catalytic CH4(ppm range):

± 5% of reading or ± 50 ppm (whichever is greater)**

IR Combustible Gas/IR CO2:

± 5% of reading or ± 2% of full scale (whichever is greater)

Oxygen:

± 0.5% O2

Hydrogen Sulfide:

± 5% of reading or ± 2 ppm H2S (whichever is greater)

Carbon Monoxide:

± 5% of reading or ± 5 ppm CO (whichever is greater)

Toxic Sensors (ESM-01 Type and CT-7 Series Type):

± 10% of reading or ± 5% of full scale (whichever is greater)

*These are RKI factory settings. See “Viewing & Changing M2A Parameters” on page 42 to change the alarm settings.

**Independent of zero drift.

Table 1: M2A Specifications

www. .com information@itm.com1.800.561.8187

10 M2A Transmitter Operator’s Manual

Chapter 2: Description

Overview

This chapter describes external and internal components of the M2A Transmitter.

External Description

This section describes the junction box and all external components of the M2A transmitter.

Figure 1: M2A External Components

Junction Box

The M2A’s cast aluminum junction box is dust and weather resistant. The junction box also protects the M2A

and all connections made to it. Use the three 3/4 NPT conduit ports to mount the detector to the junction box

(factory installed in the bottom port) and connect wiring from an external device (left port). The top port is

shipped with a factory installed and sealed conduit plug to avoid leaks into the junction box. If necessary, the

conduit plug can be removed and the top port can be used for wiring.

WARNING: If the top conduit port is used for wiring, be sure to seal the threads to ensure water does not

enter the junction box. See “Wiring the M2A Transmitter” on page 28 for complete wiring

instructions.

Use the junction box’s two mounting holes to mount the M2A to a vertical surface at the monitoring site. The

window in the cover on the front of the junction box allows you to view the OLED display and use the magnetic

wand to actuate the magnetic control switches so you can perform non-intrusive calibration. Removing the cover

Magnetic

Wand

Junction Box Cover 3/4 NPT Conduit Port, Plugged

3/4 NPT

Conduit Port

Window

Mounting Slot (2x)

Detector

(Catalytic LEL Detector Shown)

www. .com information@itm.com1.800.561.8187

Otros manuales para M2A

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Transmisor de RKI Instruments

RKI Instruments

RKI Instruments 65-2660RK-01-04 Manual de usuario

RKI Instruments

RKI Instruments 65-2646RK0504SS Manual de usuario

RKI Instruments

RKI Instruments 65-2320RK Manual de usuario

RKI Instruments

RKI Instruments 65-2640XL-05-04 Manual de usuario

RKI Instruments

RKI Instruments 65-2331RK Manual de usuario

RKI Instruments

RKI Instruments 65-2640XL-04 Manual de usuario

RKI Instruments

RKI Instruments M2A 65-2643RK-05-04 Manual de usuario

RKI Instruments

RKI Instruments 65-2340RK Manual de usuario

RKI Instruments

RKI Instruments 65-2640RKSS-04S Manual de usuario

RKI Instruments

RKI Instruments 65-2646XL0504SS Manual de usuario

RKI Instruments

RKI Instruments 65-2333 Manual de usuario

RKI Instruments

RKI Instruments 65-2462RK Manual de usuario

RKI Instruments

RKI Instruments M2 Manual de usuario

RKI Instruments

RKI Instruments 65-2435RK Manual de usuario

RKI Instruments

RKI Instruments 65-2649SS-CH4-4 Manual de usuario

RKI Instruments

RKI Instruments 65-2405RK-05-04 Manual de usuario

RKI Instruments

RKI Instruments 65-2645RK-05-04 Manual de usuario

RKI Instruments

RKI Instruments 65-2424RK Manual de usuario

RKI Instruments

RKI Instruments 65-2443SS-100 Manual de usuario

RKI Instruments

RKI Instruments 65-2643RK-05-04 Manual de usuario

RKI Instruments

RKI Instruments 65-2445 05 Series Manual de usuario

RKI Instruments

RKI Instruments 65-2335RK Manual de usuario

RKI Instruments

RKI Instruments 65-2443SS Manual de usuario

RKI Instruments

RKI Instruments 65-2640RK-03 Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario