Rivet King FreeSet RK-777C-1Q Manual de usuario
OPERATING INSTRUCTIONS
FreeSet
®
- Operating instructions -
Battery blind rivet tool
RK-777C-1(Q/STR)
Issue date: March 2021
Tool Firmware: from 2.2.6.0
Freeset Manager: from 2.0.6.0
NOTE
- 2 -
Table of contents
41 Operating principles
1.1 Scope of delivery 4
1.2 General
information
4
1.3 Signs and symbols
used
6
1.4 Structure of the warnings 7
1.5 Technical terms and abbreviations used 7
1.6 Intended use 8
1.7 Improper use 8
1.8 Duties of the operator 9
1.9 Duties of personnel 9
1.10 Training of personnel 10
1.11 Guarantee and liability 10
1.12 Copyright 11
12 2 General safety information for power tools
2.1 Occupational safety 12
2.2 Electrical safety 13
2.3 Safety of people 13
2.4 Use and handling of power tools 14
2.5 Use and handling of battery tools 15
2.6 Service 16
17 3 Important information about this tool
3.1 Handling the associated lithium ion battery 17
3.2 Information on the associated charger 18
3.3 Structural modifications 18
3.4 Cleaning the device and disposal 19
20 4 Start-up and use
4.1 Tool structure 21
4.2 Operation 22
4.2.1 Inserting and removing the battery 22
4.2.2 Press start button 23
4.2.3 Front LED 23
4.2.4 LED indicator at the back and sound signals 24
4.2.5 OLED display 24
4.2.6 Empty remaining collection
container
25
4.2.7 Reducing pipes 27
4.2.8 Selection of nose piece 27
4.2.9 Selection of nose assembly 28
4.2.10 Set fastener 29
4.2.11 Contact pressure
sensor
30
4.2.12 QuickRiv-Technology 31
4.2.13 Overload 32
4.2.14 Standby and Shut-down mode 32
4.2.15 Charge state of the battery 33
PAGE
PAGE
PAGE
PAGE
- 3 -
4.2.16 Display notifications 34
4.3 Freeset Manager Software 35
4.3.1 Setup 38
4.3.2 General →Energy & Lighting
38
4.3.3 General →TM version 39
4.3.4 Management 40
4.3.5 Signals →OLED-display 41
4.3.6 Signals →Sound
signals
42
4.3.7 Update 43
4.3.8 Programming 44
4.3.9 Program 45
4.3.10 Program →Option 50
4.4 Maintenance and
service
52
4.5 Cleaning 52
4.5.1 General
information
52
4.5.2 Clean clamping
jaws
53
4.5.3 Service interval counter 54
55 5 Storage
56 6 Technical data
58 7 Troubleshooting and Fault repair
59 CE Declaration of conformity
PAGE
PAGE
PAGE
PAGE
- 4 -
1Operating principles
Dear customers,
thank you for choosing a RivetKing product.
This quality product fulfils the highest requirements with regard to performance, quality
and accuracy. When used correctly the product will undoubtedly perform very well for
many years.
These operating instructions contain information on safety and for the operation of the
tool. In addition it contains information on the dimensions and technical data. We would
be happy to assist you with additional information or to answer your questions. Our
technical support and our technicians would be happy to assist you.
1.1 Scope of delivery
•Cordless blind riveting tool
•USB Cable (Type A on Mini B)
•Operating instructions
1.2 General information
Read the tool operating instructions before initial operation. Please pay particular
attention to Chapter 2 „General Safety Notes“.
This operating instruction should make it easier for the operator to get to know the tool
and to use it for its intended purpose. The operating instructions include important
information related to the safe and proper operation of the tool. Compliance with these
instructions helps you to:
•Avoid hazards
•Avoid repair costs and downtimes
•Increase the reliability and the lifespan of the product.
- 5 -
This operating instructions must be read and applied by every person who is assigned to
conduct work using this tool.
In addition to this operating instructions the applicable regulations on accident prevention
and environmental protection should be observed.
NOTE
After reading, keep the operating instructions in a place accessible to every
operator. If you have any further questions, please feel free to contact us.
- 6 -
1.3 Signs and symbols used
The following signs and symbols will be used in this operating instructions or on the product:
Do not dispose the battery in a fire
Defective battery
Direct current
Read this operating instructions
Do not dispose with household waste
Symbol Explanation
EU conformity marking
®
Registered trademark
Use only indoors
Intrinsically safe transformer
Battery is charging
Protection class II
Do not throw the battery into water
Battery fully charged
Universal Recycling Symbol
- 7 -
1.4 Structure of the warnings
The warnings are structured as follows:
1.5 Technical terms and abbreviations used
°C Degrees Celsius, temperature
Ah Amp hours, electric charge, battery capacity
dB(A) Decibels, sound pressure level (A-weighted)
Hz Hertz, Frequency
LpA Emission sound pressure level, workplace-related
m/s² Acceleration, Vibration
DANGER
Indicates an immediate dangerous situation that can lead to serious or even
deadly injuries and/or that could seriously damage or even destroy the tool.
WARNING
Indicates a potentially dangerous situation that can lead to serious injuries
and/or damage to the tool.
NOTE
Important and useful information on using this tool.
Abbreviation Meaning
AC Alternate current
Overall vibration
DC Direct current
Li-Ion Lithium-ion, battery technology
- 8 -
min
-
1Revolutions per minute, Speed
SN Serial number
W Watts, electrical power
1.6 Intended use
This battery operated blind riveting tool was designed to prepare rivet joints.
The tool may only be used for this purpose as described in this operating instructions.
Only materials that are suitable for this type of tool may be used.
Any other use or use beyond that is considered improper use. Industrial Rivet &
Fastener is not liable for any damage resulting from this.
1.7 Improper use
We accept no liability for damage and malfunctions resulting from non-observance of
these operating instructions and improper use.
Abbreviation Meaning
mNN Meters above sea level, height
V Volts, electrical voltage
WARNING
Intended use also includes
•following all indications of the operating instructions and
•observance of inspection and maintenance works.
DANGER
The use of this tool for other purposes, e.g. for hammering, is not permitted.
Improper use or incorrect accessories can lead to dangers with unforeseeable
consequences.
- 9 -
1.8 Duties of the operator
The operator undertakes to only allow people who are familiar with the basic regulations
on occupational safety and accident prevention and who have been trained on how to use
the tool at the workplace to work with this tool.
The safety awareness of the personnel while working has to be reviewed at regular
intervals.
In addition it is necessary to established safety measures for operator safety which are
based upon an estimation of the vibration load during actual conditions of use.
1.9 Duties of personnel
Prior to its use all people who work with this tool are obligated to inform themselves of
the applicable workplace safety and accident prevention regulations for this power tool
and to observe them.
It is recommended that every operator wears hearing protection.
- 10 -
1.10 Training of personnel
Only trained and instructed personnel should work with this tool. The responsibilities of
the personnel must be clearly defined. Trainees may only work with this power tool under
the supervision of an experienced person.
1.11 Guarantee and liability
Guarantee and liability claims for personal injury and property damage are excluded, if
caused by one or more of the following:
•improper use
•failure to observe these operating instructions
•improper installation, commissioning, operation and maintenance of the device
•Operating the device with defective safety devices or improperly installed, or non-
functioning safety and protective devices
•Failure to observe the information in the operating instructions regarding transport,
storage, assembly, commissioning, operation and maintenance of the device
•unauthorised structural modifications to the device
•improperly performed repairs
•catastrophes due to external influences and acts of God
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Herramientas para remaches de Rivet King
Rivet King
Rivet King RK-187 Manual de usuario
Rivet King
Rivet King RK-8000S Manual de usuario
Rivet King
Rivet King RK21 Manual del operador
Rivet King
Rivet King RK-250 Manual de usuario
Rivet King
Rivet King FreeSet RK-777-1 Manual de usuario
Rivet King
Rivet King RK-59SPS Manual de usuario
Rivet King
Rivet King RK-INLINE Manual de usuario
Rivet King
Rivet King RK-986 Manual de usuario
