Riva RTC1130 Manual de usuario

RTC1130 Ver1.0

www.rivatech.de

Quick Installation Guide

This manual has been designed to guide you through basic installation, configuration and the

webpage access settings of the device.

RTC1130 Ver1.0

www.rivatech.de

Step1. Connect cables

Connect proper cables to the device. To see the correct positions of all connectors, refer to

the following image below.

Power Adaptor Connector (DC 12V)

The device is polarity sensitive. Incorrect power

connection may cause the device to malfunction.

Caution

* Model design and appearance are subject to change without any prior notice.

Network/POE Port

9 pin terminal block

for D/I, D/O, audio, and

serial communication

Power DC 12V

BNC Video Out

Reset Button

ETHERNET

Micro SD

RESET

LOOP OUT

DC 12V

RS-485 DO DI AUDIO

_+C 1 C 1 Out In

Intelligent Thermal Camera

Micro SD Card

USB Connector

RTC1130 Ver1.0

www.rivatech.de

Step2. Set up network environment

The default IP address of the device is 192.168.XXX.XXX. Users can identify the IP address of

the device from converting the MAC address’s hexadecimal numbers, which is attached to the

device. Be sure that the device and PC are on a same area network before running the

installation.

Generic IP Environment

In case of generic private network environment where IP address 192.168.XXX.XXX are

used, users may view the live streaming images on a web page using the device’s default IP

address:

1. Convert the device’s MAC address to the IP address. Refer to the Hexadecimal-Decimal

Conversion Chart at the end of the manual.

(The MAC address of the device is attached on the side or bottom of the device.)

2. Start the Microsoft® Internet Explorer web browser and enter the IP address of the device.

3. Web streaming and device configurations are supported through ActiveX program. When

the ActiveX installation pop-up window appears, authorize and install the ActiveX setup.exe.

MAC address = 00-13-23-01-14-B1 → IP address = 192.168.20.177

Convert the last two set of hexadecimal numbers to decimal numbers.

RTC1130 Ver1.0

www.rivatech.de

Custom IP Environment

IPAdminTool and the manual are provided on USB stick or can download from www.rivatech.de

homepage.

IPAdminTool is a management tool, which automatically scans all of the network products for

users to perform administrative tasks, which includes network configurations, firmware update,

device reboot, and device organizations.

To modify the device’s default IP address for customized network area;

1. Find the device from the IPAdminTool’s list and highlight the device’s name.

2. Right-click the mouse and select “IP Address”; IP Setup window appears.

PC environment Info

Give new unique IP address in

last two sets and mirror other

information in other boxes

RTC1130 Ver1.0

www.rivatech.de

3. In the IP Setup’s window, information under ‘Local Network information’ displays the

user/PC’s network area information. Those information need to be incorporated to the IP

Address, Subnet Mask, Gateway, and DNS boxes, except the last 2 sets of IP Address,

which are to be the unique numbers for the device. Refer to the image above for the

setting

4. Click ‘Setup’ to complete the modification. When the dialog box appears to request user

name and password, enter the default value for the administrator account (case-sensitive)

as: ID:

root

Password:

pass

RTC1130 Ver1.0

www.rivatech.de

Step3. View video on web page

Once the device has the proper IP address, users can view the live streaming images through

a web browser.

1. Type the correct IP address in the Microsoft® Internet Explorer

2. Grant the web browser’s AxAll.cab ActiveX setup and proceed with installations.

RTC1130 Ver1.0

www.rivatech.de

Caution

3. Follow the instructions of the dialog boxes and complete the installation. Once the

installation is complete, start the web browser again and check if video stream is displayed

in the main view frame.

If “

This software requires the Microsoft XML Parser V6 or higher.

Please download MSXML6 from the Microsoft website to continue.

Error code: Cannot create XMLDOMDocument.

” message appears,

download and install the Microsoft Core XML Services (MSXML) 6.0.

Step4. Setting IP Address

To set up the Network configuration:

1. Click Setup on the upper right of the web page. The login page is displayed as below.

2. Enter the default user name (root) and the default password (pass), and then select OK.

3. Click System Options on the left of the Setup page, and then select TCP/IP from the

System Options menu.

4. Input the data for the IP address configuration, and click the Apply button on the bottom of

the page.

The default username

and password are:

root and pass.

RTC1130 Ver1.0

www.rivatech.de

When modifying the IP address, be advised to have the correct Subnet mask and Gateway

ready. To use DHCP, select Obtain an IP address via DHCP.

Rebooting

Reset can be carried out as follows:

Use a pointed object to push the reset button for 1~2 seconds.

Wait for the system to reboot.

Resetting to the Factory Default Settings

Resetting the device to the factory default will reset all configured parameters to the initial

factory settings.

To perform the Factory Default settings:

Use a pointed object to push the reset button and hold for 5 seconds. The orange LED turns

off while green LED flashes.

Once the green LED becomes solid, release the Reset button.

Wait for the system to reboot.

More Information

To learn more about using other features of your devices, refer to the manuals as “Web

Interface Manual” or “VCAsys Online Help”, which is available on USB stick or on

www.rivatech.de homepage.

RTC1130 Ver1.0

www.rivatech.de

Hexadecimal-Decimal Conversion Table

Refer to the following table when you convert the MAC address of your device to IP

address.

Hex

Dec

Hex

Dec

Hex

Dec

100

101

102

103

104

105

106

107

108

109

110

Hex

Dec

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

Hex

Dec

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

Hex

Dec

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

Hex

Dec

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

Tabla de contenidos

Otros manuales de Cámara IP de Riva

Riva

Riva RC1202HD-5241 Manual de usuario

Riva

Riva RC6802HD-6211 Manual de usuario

Riva

Riva RC1202HD Manual de usuario

Riva

Riva RC2102HD-5511 Manual de usuario

Riva

Riva RC2103HD-6611 Manual de usuario

Riva

Riva RC2103HD-6611 Manual de usuario

Riva

Riva RTC series Manual de usuario

Riva

Riva RC1100M Manual de usuario

Riva

Riva RC2102HD-5511 Manual de usuario

Riva

Riva RC6702HD-6311 Manual de usuario

Manuales populares de Cámara IP de otras marcas

FLIR

FLIR Exx series Manual de usuario

Avigilon

Avigilon H4A-BO1-IR Manual de usuario

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manual de usuario

ShareTech

ShareTech AV1 Manual de usuario

Ezviz

Ezviz C6C Manual de usuario

Melchioni

Melchioni UCAM 2015 Manual de usuario

Geutebruck

Geutebruck G-Cam/ESD-4630 Manual de usuario

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manual de usuario

Mitel

Mitel 6800i Series Manual de servicio

Vitek

Vitek VTC-IR403-212NP Manual de usuario

THOMSON

THOMSON DSC - 323W Manual de usuario

AVer

AVer FB2027 Manual de usuario

ENFORCER

ENFORCER EV-T5105-N2SQ Manual de usuario

Wansview

Wansview NC543 Manual de usuario

Eneo

Eneo MCB-64A0003M0A Manual de usuario

deView electronics

deView electronics CBDNI36F Manual de usuario

Swann

Swann SwannEye Manual de usuario

LevelOne

LevelOne IP CamSecure Manual de usuario