Risco RisControl Manual de usuario
RisControl
Quick Installation Guide
Model: RP432KPTZ
2
Introduction
The RisControl can be used in 3 operation modes, as follows:
•Smart Home + Security –For Security, RisControl is connected to a
control panel via the RS-485 bus. For Smart Home operation,
RisControl is connected to RISCO Cloud via Wi-Fi. If there are
additional RisControl units, a Master / Slave configuration should be
defined.
•Smart Home Only–RisControl is connected to the RISCO Cloud via
Wi-Fi (no BUS connection to the RISCO control panel). In addition,
if there are more RisControl units in the installtion, a Master / Slave
configuration should be defined.
•Security Only- RisControl is connected to a control panel via the
RS-485 bus and to the RISCO Cloud via Wi-Fi
3
RisControl Mounting
Smart Home Standalone:
Step 1
4
Step 2
* 5Vdc/2A Power Supply to USB-C (P/N RP432PSR00A)
*
5
Step 3
6
Step 4
7
Installation using Power Supply:
*
* 100-240VAC Adaptor to 14.4VDC/3A (P/N RP432PS00SAA)
8
When Connected to Control Panel:
Step 1
9
Step 2
Wall Installation
OR
10
3 Gang Flush Mounting Box
Otros manuales para RisControl
3
Este manual sirve para los siguientes modelos
1
Otros manuales de Panel de control de Risco
Risco
Risco RisControl Manual de usuario
Risco
Risco GT 600 Manual de programación
Risco
Risco GT 601 Manual de instrucciones
Risco
Risco Gardtec GT480 Manual de usuario
Risco
Risco GardTec 350+ Manual de usuario
Risco
Risco GardTec 350+ Manual de usuario
Risco
Risco ProSYS 128 Manual de usuario
Risco
Risco LightSYS Manual de instrucciones
Risco
Risco GT Plus Manual de instrucciones
Risco
Risco GT 600 Manual de usuario
