Rimage Professional 5100N Manual de usuario

1 2000447_E

Rimage Professional 5100N and 5300N

Maintain the Professional

Use the information in this section to keep your Professional in optimal operating

condition.

,Warning! Always power off the autoloader and unplug the power cord before

you access the embedded PC.

Overview

Regular preventative maintenance of your Professional can help to ensure

error-free recordings and clean printed labels. Maintenance involves cleaning the

system and aligning the Everest printer on top of the autoloader.

Note: The Everest printer has its own maintenance requirements. Refer to

your Rimage Everest User Guide for information.

Cautionary Information

nCaution: To avoid damaging the Professional during maintenance:

• Never use oils, silicone, or other lubricants on any part of the

Professional.

• Use only non-abrasive cleaners to wipe down the surfaces of your

Professional.

• Never use cleaners to clean the embedded PC.

• Avoid pouring cleaners directly onto the Professional. Instead, apply the

cleaner to the cloth rst.

• Observe precautions for electrostatic-sensitive devices whenever you

access the embedded PC.

English

2000447_E 2

Maintain the Professional

Preventative Maintenance Schedule

Use the following table as a guideline for how often to perform preventative

maintenance tasks.

Note: Your system may require more frequent maintenance if used in a

dusty area, such as a store or warehouse.

Before you begin:

1. Power off the Professional.

2. Disconnect the power cord.

-Important! Failure to follow the maintenance schedule outlined below may

void your warranty.

Tool Task Frequency

Lint-free cloth

Non-abrasive, all-

purpose cleaner

Wipe down all surfaces of the

autoloader, including:

• Sides and top

• Input bins

• Output trays

• Output bin

• Base (remove the input bin rst)

• Top surface on the lift arm

Weekly

Can of

compressed air

Remove dust and debris from the

fans at the back of the autoloader.

Monthly

Vacuum Remove dust and debris from

the openings at the back of the

autoloader.

Monthly

Can of

compressed air

Remove the side panels and remove

all dust from the embedded PC.

Monthly

Torx T25 driver Align the Everest printer. Refer to

the Align the Printer section in

the Rimage Professional User Guide.

On installation

and as needed

English

Otros manuales para Professional 5100N

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de computadora de Rimage

Rimage

Rimage CDPR3 Manual de usuario

Rimage

Rimage 2000i 6.5-7.1 Service Pack 1 Manual de usuario

Rimage

Rimage Producer III 6100 Manual de usuario

Rimage

Rimage Producer III Manual de usuario

Rimage

Rimage Producer III 6100N Manual de usuario

Rimage

Rimage AutoPrinter Manual de usuario

Rimage

Rimage Producer III series Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario