Rigol DS6000 Series Instrucciones de instalación y funcionamiento

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

info@rigol.com

www.rigolna.com

Rigol DS6000

Application Note

Application Notes

Comparison Guides

FAQs

How-To Guides

Programming Manuals

Quick Start Guides

Support Information

User’s Guides

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

Measuring Video Signals with the DS6000:

Video signals naturally are challenging to properly display on a digital storage

oscilloscope’s screen. This makes such signals a perfect example for the

purpose of demonstrating the capabilities of the Rigol DS6000.

In this section we are going to demonstrate the rich features and capabilities

of the DS6000 by analyzing with it an NTSC video signal.

1- Connect the NTSC video signal to channel 1 of the DS6000. Ensure that

the video signal is ON and then press the green “Auto” button. The

resultant signal waveform will appear as below:

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

2- Then press the horizontal scale button in order to enable delayed sweep

feature of the DS6000. One can notice the extensive level of detail of the

captured signal by increasing the signal zoom by turning the horizontal

scale knob.

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

Capturing Signal Glitches using the DS6000:

The Rigol DS6000 series family features a 120,000 waveforms a second

update rate. This is a serious advantage when examining signals for absolute

integrity.

Determining a signal’s lack of anomalies is not always an easy task. Especially

if an anomaly like a glitch for instance occurs within a very short time period

and is beyond the equipment’s capability to be captured; for this purpose,

this Glitch capturing experiment is a very good demonstration of the

performance capabilities of the DS6000 series.

For the purpose of the demonstration, we will input a square wave signal into

the DS6000 input, however a glitch signal will be introduced randomly as well.

The glitch lasts less than 30ns on the input side.

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

The image below is of the square wave signal described above:

The glitch signal is intermittent and appears for much less than a second on

the screen before it disappears. For the purpose of making it more visible in

this tutorial, we will turn display persistence on. To accomplish that, press

“Display” button, in the display menu, then set “Persis.Time” to 200ms

Additionally, to display all of the measurable wave characteristics, we press

the “MEAS” button, and then press the “Display All” soft button on the

MEASURE right hand side menu. Also for the purpose of measuring the

wave’s frequency, the frequency-counter is enabled.

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

As we can observe from the snapshot above, the DS6000 proves capable of

capturing the signal glitch due to its high waveform update rate and its high

resolution capabilities are reflected in the accuracy of the signal –glitch

capture as observed.

RIGOL TECHNOLOGIES USA INC

877-4-RIGOL-1 How-To Guide

[email protected]

www.rigolna.com

Capturing Amplitude Modulation Glitch using the DS6000:

In this experiment we use the D6000 to measure an amplitude modulated

signal as seen below:

However, deep within this signal is a glitch. The glitch is very hard to find and

can only be spotted utilizing the DS6000 UltraVision zoom technology.

Connect the Channel 1 to the AM pin and Channel 2 to the Sync pin.

Press the “AUTO” button. Remove Channel 2 from the screen by pressing

“CH2” button repetitively.

We then proceed to show the envelope of the wave by adjusting the

Otros manuales para DS6000 Series

Tabla de contenidos

Otros manuales de Instrumento de medición de Rigol

Rigol

Rigol DP821A Manual de usuario

Rigol

Rigol DSA800E Series Instrucciones de funcionamiento

Rigol

Rigol DSA1000A Series Instrucciones de funcionamiento

Rigol

Rigol DSA800 Series Manual de usuario

Rigol

Rigol DS1202Z-E Manual de usuario

Rigol

Rigol DSA1030A series Manual de usuario

Rigol

Rigol RPL1116 Manual de usuario

Rigol

Rigol DS Series Guía de inicio rápido

Rigol

Rigol RP1000D Series Manual de usuario

Rigol

Rigol RSA3045 Manual de usuario

Rigol

Rigol DSA800E Series Manual de usuario

Rigol

Rigol DS1000CA series Manual de usuario

Rigol

Rigol M300 Series Manual de usuario

Rigol

Rigol PHA0150 Manual de usuario

Rigol

Rigol RSA5065 Manual de usuario

Rigol

Rigol RSA3030 Manual de usuario

Rigol

Rigol RSA5000-VNA Manual de usuario

Rigol

Rigol MSO8000 Series Manual de usuario

Rigol

Rigol MSO1000Z series Manual de usuario

Rigol

Rigol DS6104 Guía del administrador

Rigol

Rigol PCA1500 Manual de usuario

Rigol

Rigol DSA800 Series Manual de usuario

Rigol

Rigol RSA5065N-OCXO Manual de usuario

Rigol

Rigol RSA3030-TG Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario