Ricoh Pro C900s Instrucciones originales

Safety Information for Pro C900S

Introduction

Read this manual carefully before using the machine. Keep this manual in a handy place for quick reference.

Important

Contents of this manual are subject to change without prior notice. In no event will the company be li-

able for direct, indirect, special, incidental, or consequential damages as a result of handling or oper-

ating the machine.

Notes:

Some illustrations in this manual might be slightly different from the machine.

Certain options might not be available in some countries. For details, please contact your local dealer.

Depending on which country you are in, certain units may be optional. For details, please contact your

local dealer.

Laser Safety:

This machine complies with requirements of IEC60825-1:2001(EN60825-1:1994+A2:2001+A1:2002)

for class 1 laser product. The machine contains multiple AlGaAs laser diodes, max.111(rating 38)-milliwatt,

770 - 810 nanometer wavelength for each emitter. The power intensity from the laser unit is 1.33-milliwatt.

Caution:

Use of controls or adjustments or performance of procedures other than those specified in this manual

might result in hazardous radiation exposure.

Notes:

Two kinds of size notation are employed in this manual. With this machine refer to the metric version.

For good print quality, the supplier recommends that you use genuine toner from the supplier.

The supplier shall not be responsible for any damage or expense that might result from the use of parts

other than genuine parts from the supplier with your office products.

Power Source

220 - 240V, 50/60Hz, 25A or more

Please be sure to connect the power cord to a power source as above. For details about power source,

see Troubleshooting.

Safety Information

When using this machine, the following safety precautions should always be fol-

lowed.

Safety During Operation

In this manual, the following important symbols are used:

Safety Precautions to be Followed

This section explains safety precautions that should always be followed when

using this machine.

Environments where the machine can be used

This section explains safety precautions about environments where the machine

can be used.

RWARNING:

RCAUTION:

Handling power cords and power plugs

This section explains safety precautions about handling power cords and power plugs.

WARNING:

Indicates a potentially hazardous situation which, if instructions

are not followed, could result in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation which, if instructions are not

followed, may result in minor or moderate injury or damage to property.

•Keep the machine away from flammable liquids, gases, and aerosols.

A fire or an electric shock might occur.

•Keep the machine away from humidity and dust. Otherwise a fire or an elec-

tric shock might occur.

•Do not place the machine on an unstable or tilted surface. If it topples over,

an injury might occur.

•Make sure the room where you are using the machine is well ventilated and

spacious. Good ventilation is especially important when the machine is used

heavily.

RWARNING:

RCAUTION:

•Connect this machine only to a power source that matches the speci-

fications shown in “Information” in the HTML manual or “Safety Infor-

mation” in the printed manual and do not use an extension cord.

•Use of this machine with extension cords and power sources other

than those that match the specifications shown constitutes an electric

shock and fire hazard.

•Power cords that are damaged, broken, modified, trapped under heavy

objects, pulled hard, or bent severely are electric shock and fire haz-

ards.

•Disconnect the power plug (by pulling the plug, not the cable) if the

power cable or plug becomes frayed or otherwise damaged.

•If the power cord is damaged (exposure of the core, disconnection,

etc.), contact your service representative to change a new one. Oper-

ating the machine with a damaged power cord may cause an electric

shock or fire.

•It is dangerous to handle the plug with wet hands. Doing this may re-

sult in receiving an electric shock.

•Touching the prongs of the power cable's plug with anything metallic

constitutes a fire and electric shock hazard.

•When you disconnect the power plug from the wall outlet, always pull the

plug (not the cable).

•To disconnect the power cord, pull it out by plug. Do not drag the cord itself.

Doing so may result in damage to the cord, leading to fire or electric shock.

•For safety reason, unplug the power cord from the wall outlet if the machine

will not be used for an extended period of time such as holidays.

•Before moving the machine, be sure to disconnect all external connections,

especially the power cord from the wall outlet. Damaged power cords are a

fire and electric shock hazard.

•Make sure the plug is inserted firmly in the wall outlet.

•Voltage must not fluctuate by more than 10%.

•The wall outlet shall be installed near the machine and shall be easily ac-

cessible.

Handling the main machine

This section explains safety precautions about handling the main machine.

RWARNING:

RCAUTION:

Handling the machine's interior

This section explains safety precautions about handling the machine's interior.

•Turn off the power and disconnect the power plug (by pulling the plug,

not the cable) if any of the following occurs:

•You spill something into the machine.

•You suspect that your machine needs service or repair.

•The external housing of your machine has been damaged.

•Do not turn the earth leakage breaker from the off to the on position.

Otherwise it might lead to an electric shock, or cause the circuit break-

ers to trip.

•Protect the machine from dampness or wet weather, such as rain and snow.

•Unplug the power cord from the wall outlet before you move the machine.

While moving the machine, you should take care that the power cord will not

be damaged under the machine.

•After you move the machine, use the caster fixture to fix it in place. Other-

wise the machine might move or come down to cause an injury.

•Contact your service representative if you need to lift the machine (such as

when relocating it to another floor). Do not attempt to lift the machine without

the assistance of your service representative. The machine will be damaged

if it topples or is dropped, resulting in malfunction and risk of injury to users.

The machine's various handling areas are for service engineer use only. Do

not touch these areas.

•Do not allow paper clips, staples, or other small metallic objects to fall inside

the machine.

•For environmental reasons, do not dispose of the machine or expended

supply waste at household waste collection points. Disposal can take place

at an authorized dealer.

RWARNING:

RCAUTION:

Handling the machine's supplies

This section explains safety precautions about handling the machine's supplies.

RWARNING:

•To avoid hazardous electric shock or laser radiation exposure, do not

remove any covers or screws other than those specified in this manu-

al.

•The fusing section of this machine might be very hot. Caution should be tak-

en when removing misfed paper.

•The inside of the machine could be very hot. Do not touch the parts with a

label indicating the “hot surface”. Otherwise, an injury might occur.

•During operation, rollers for transporting the paper and originals revolve. A

safety device is being installed so that the machine can be operated safely.

But take care not to touch the machine during operation. An injury might oc-

cur.

•Fire and breakdown can result from heavy accumulation of dust inside this

machine. Consult your service representative for details about and charges

for cleaning the machine's interior.

•Do not incinerate used toner or toner containers. Toner dust might ig-

nite when exposed to an open flame. Dispose of used toner containers

in accordance with local regulations.

•Do not store toner, used toner, or toner containers in a place with an

open flame. The toner might ignite and cause burns or a fire.

•Keep the waste oil bottle away from flames. There is a risk of fire or

burns.

•Take care not to spill the fuser oil.

•Keep the polythene materials (bags, gloves, etc.) supplied with this

machine away from babies and small children at all times. Suffocation

can result if polythene materials are brought into contact with the

mouth or nose.

RCAUTION:

•To avoid fire or machine failure, do not use aluminum foil, carbon paper, or

similar conductive paper.

•Do not open toner containers forcefully. Toner can spill, dirtying your clothes

or hands, and possibly resulting in accidental ingestion.

•Keep toner (used or unused) and toner containers out of reach of children.

•If toner or used toner is inhaled, gargle with plenty of water and move into a

fresh air environment. Consult a doctor if necessary.

•If toner or used toner gets into your eyes, flush immediately with large

amounts of water. Consult a doctor if necessary.

•If toner or used toner is swallowed, dilute by drinking a large amount of wa-

ter. Consult a doctor if necessary.

•Avoid getting toner on your clothes or skin when removing a paper jam or

replacing toner. If your skin comes into contact with toner, wash the affected

area thoroughly with soap and water.

•If toner gets on your clothing, wash with cold water. Hot water will set the

toner into the fabric and may make removing the stain impossible.

•When loading paper, take care not to trap or injure your fingers.

•Keep your hands clear of the booklet finisher tray when pulling out or push-

ing in the finisher's staple unit. You can trap your fingers if you do not.

•The inside of this machine gets very hot. To avoid burns, do not touch parts

labelled “hot surface”.

•The fusing unit also gets very hot. When installing a new fuser oil unit, turn

off the machine and wait until the fusing unit cools before replacing the fuser

oil unit.

•To avoid fire and burns, keep the fuser oil unit away from naked flames and

other heat sources.

Positions of RWARNING and RCAUTION

labels

This machine has labels for RWARNING and RCAUTION at the positions

shown below. For safety, please follow the instructions and handle the machine

as indicated.

Do not touch the parts a label indicates. The inside of the machine could be very

hot. Caution should be taken when removing misfed paper.

BUL001S

BKA022S

Keep your hands clear of the ADF when removing paper jam. You might trap

your fingers if you do not.

Keep your hands clear of the multi bypass tray (tray 7) when removing paper

jam. You might trap your fingers if you do not.

The inside of the machine could be very hot. Do not touch the parts which a label

is put on. Otherwise, an injury might occur.

The screw hole in the centre of the knob gets very hot. Do not touch this area.

Doing so could result in burns.

BUL006S

BKC014S

BKC021S

BUL002S

Keep your hands clear of the finisher tray when removing paper jam. You might

trap your fingers if you do not.

Keep your hands clear of the finisher tray when removing paper jam. You might

trap your fingers if you do not.

Keep your hands clear of the finisher tray when removing paper jam. You might

trap your fingers if you do not.

BUL003S

BUL004S

BUL005S

User Information on Electrical & Electronic

Equipment

Users in the EU, Switzerland and Norway

Our Products contain high quality components and are designed to facilitate re-

cycling.

Our products or product packaging are marked with the symbol below.

The symbol indicates that the product must not be treated as municipal waste.

It must be disposed of separately via the appropriate return and collection sys-

tems available. By following these instructions you ensure that this product is

treated correctly and help to reduce potential impacts on the environment and

human health, which could otherwise result from inappropriate handling. Recy-

cling of products helps to conserve natural resources and protect the environ-

ment.

For more detailed information on collection and recycling systems for this prod-

uct, please contact the shop where you purchased it, your local dealer or

sales/service representatives.

All Other Users

If you wish to discard this product, please contact your local authorities, the

shop where you bought this product, your local dealer or sales/service repre-

sentatives.

Otros manuales para Pro C900s

Tabla de contenidos

Otros manuales de Impresora de Ricoh

Ricoh

Ricoh Aficio AP400 Manual de usuario

Ricoh

Ricoh 220-240 V Guía de inicio rápido

Ricoh

Ricoh G186 Manual de usuario

Ricoh

Ricoh Aficio CL4000DN Guía de inicio rápido

Ricoh

Ricoh MP W6700SP Manual de usuario

Ricoh

Ricoh SP 100 e Manual de usuario

Ricoh

Ricoh Aficio SP 3400N Manual de usuario

Ricoh

Ricoh DDP 70e Manual de usuario

Ricoh

Ricoh Aficio GX3000 Manual de usuario

Ricoh

Ricoh IM CW2200 Manual de usuario

Ricoh

Ricoh SP 201n Manual de usuario

Ricoh

Ricoh M047 Manual de usuario

Ricoh

Ricoh Pro L5160 Manual de usuario

Ricoh

Ricoh InfoPrint Color COLOR 1767 Manual de usuario

Ricoh

Ricoh IM 2702 Manual de usuario

Ricoh

Ricoh GW Series Manual de servicio

Ricoh

Ricoh Aficio SP 4310N Manual de usuario

Ricoh

Ricoh Aficio MP1812L Manual de usuario

Ricoh

Ricoh Aficio MP W3600 Manual de servicio

Ricoh

Ricoh SP6330 Instrucciones de instalación

Ricoh

Ricoh Aficio MP C3001 Manual de usuario

Ricoh

Ricoh AP610N - Aficio B/W Laser Printer Guía de inicio rápido

Ricoh

Ricoh C2000 Manual de usuario

Ricoh

Ricoh PJ WX4152 Guía de inicio rápido

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario

IRA3D

IRA3D POETRY4 Manual de usuario