Ricoh THETA Manual de usuario

Configure Ricoh Theta Cameras For ScanPlan

Overview

The ScanPlanTM is compatible with Ricoh Theta panoramic cameras, allowing you to take panoramic images on the fly.

Follow these instructions to prepare your Ricoh Theta camera for use.

Details

To prepare your camera for use, charge your camera. Download the Ricoh Theta app and update the firmware.

Connecting and Charging the Camera

1. Connect the supplied cable to the camera's mini USB connector port.

2. Connect the other end to a USB Port on your computer.

3. When the device is charging, the green LED will be illuminated (not flashing). When the camera is fully charged,

the LED will go off.

Note: Only allow one smart phone to be connected to the camera at a time. If another smartphone has been used

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Configure_Ricoh_Theta_Cameras_For_ScanPlan

Updated: Sat, 05 Jun 2021 19:32:58 GMT

with the Theta camera, make sure that phone is NOT set to automatically connect to the camera. It could cause

capture errors.

Downloading the Theta PC program

1. Download the RICOH THETA Setup.exe from https://support.theta360.com/en/download/.

2. Install the program to the default/recommended directory.

3. Run the RICOH THETA app by clicking the start button and scrolling down to RICOH and selecting the RICOH

app, or start typing Ricoh in the search window and then select RICOH THETA.

Updating the Theta Firmware

It is recommended to use a computer to update the firmware as the files are large.

1. With the Theta camera connected, press the power button (top button). The blue LED on the front of the camera

will turn on, and the camera icon will be illuminated.

Note: The green LED may or may not be illuminated during this step, depending on the level of charge in the

Theta.

2. With the RICOH THETA app open, click File.

3. Click Firmware Update.

4. Click OK.

5. The current version and newest version will be shown, update the firmware if necessary.

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Configure_Ricoh_Theta_Cameras_For_ScanPlan

Updated: Sat, 05 Jun 2021 19:32:58 GMT

Connecting to the Theta Wi-fi

1. Remove the USB connector from the Theta camera (the Wi-Fi can’t be enabled while it’s connected).

2. Turn on the Theta camera by briefly pressing the power button on the side.

3. LED’s will illuminate and the Wi-Fi icon above the camera icon will be flashing.

4. If the Wi-Fi icon is not flashing, press the 2nd button.

5. The Theta serial number is the default Wi-Fi password. (just the numbers NOT the “YL”).

Note: It is not advised to change the password as there is no password recovery feature.

6. The Theta camera will be visible in the list of available Wi-Fi sources as THETAYLXXXXXXXX.OSC. The X’s will

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Configure_Ricoh_Theta_Cameras_For_ScanPlan

Updated: Sat, 05 Jun 2021 19:32:58 GMT

be replaced by the serial number of your specific device.

Theta SmartPhone App Settings

1. Download and Install the Theta Smartphone App through your phone's app store.

2. Open the app and press the gear symbol.

3. The default settings do not need to be changed, but this page can also be used to check the camera battery level.

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Configure_Ricoh_Theta_Cameras_For_ScanPlan

Updated: Sat, 05 Jun 2021 19:32:58 GMT

4. Press the Left Arrow at the bottom to return to the previous screen.

5. Press the camera icon.

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Configure_Ricoh_Theta_Cameras_For_ScanPlan

Updated: Sat, 05 Jun 2021 19:32:58 GMT

6. Press the lower gear icon to open additional settings.

7. Press Camera Settings.

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Configure_Ricoh_Theta_Cameras_For_ScanPlan

Updated: Sat, 05 Jun 2021 19:32:58 GMT

8. Set Sleep Mode to a minimum of 10 minutes, and consider an Auto power off setting of one hour to conserve

battery life.

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Configure_Ricoh_Theta_Cameras_For_ScanPlan

Updated: Sat, 05 Jun 2021 19:32:58 GMT

Otros manuales para THETA

Tabla de contenidos

Otros manuales de Cámara digital de Ricoh

Ricoh

Ricoh Caplio GX8 Manual de usuario

Ricoh

Ricoh WG-4 GPS Manual de usuario

Ricoh

Ricoh RDC-7 Hoja de especificaciones

Ricoh

Ricoh Caplio R1 Manual de usuario

Ricoh

Ricoh G900 Manual de usuario

Ricoh

Ricoh EV-G030B1 Manual de usuario

Ricoh

Ricoh PENTAX XG-1 Manual de usuario

Ricoh

Ricoh Caplio RR-1 Manual de usuario

Ricoh

Ricoh R8 Instrucciones de montaje

Ricoh

Ricoh GR III Guía de instalación

Ricoh

Ricoh pentax KP Manual de usuario

Ricoh

Ricoh Pentax K-3 III Manual de usuario

Ricoh

Ricoh R50 Manual de usuario

Ricoh

Ricoh Caplio 400G wide F Guía de inicio rápido

Ricoh

Ricoh Caplio R5 Manual de usuario

Ricoh

Ricoh PENTAX WG-10 Manual de usuario

Ricoh

Ricoh AUTO TLS EE Manual de usuario

Ricoh

Ricoh GR DIGITAL M Manual de usuario

Ricoh

Ricoh R10 Manual de programación

Ricoh

Ricoh GR Digital II Manual de usuario

Ricoh

Ricoh RDC-5300 Manual de usuario

Ricoh

Ricoh Caplio R30 Manual de usuario

Ricoh

Ricoh Pentax K-3 II Manual de usuario

Ricoh

Ricoh Caplio R1V Manual de usuario

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Pentax

Pentax Optio LS 465 Manual de usuario

Sanyo

Sanyo VPC-S1085 Manual de usuario

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Nikon

Nikon COOLPIX A Manual de usuario

Pentax

Pentax P-5 Manual de usuario

BlazeVideo

BlazeVideo A280 Manual de usuario

Sony

Sony MCA-20 Manual de usuario

Sony

Sony Alpha DSLR-A290 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

Leica

Leica M10-R Manual de usuario

FujiFilm

FujiFilm FinePix A700 Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE J1470S Manual de usuario

Sony

Sony A6700 Guía del usuario

Canon

Canon EOS ELAN7 Manual de usuario