Ribao JM-90 Manual de usuario

Banknote Counter

INSTRUCTION MANUAL

2009 Edition

(V1.2)

CONTENT

OVERALL DESCRIPTIONS 3

1-1. Names and Functions of Parts 3

1-2. Names and Functions of Keys 5

FUNCTIONS 6

BASIC OPERATION 11

DEFAULT SETTINGS IN FACTORY 11

SPECIFICATIONS 12

ADJUSTMENT OF THE FEED GAP 12

DAILY CARE 13

ERRORS AND REMEDIAL MEASURES 14

ACCESSORIES & OPTIONS 15

1.OVERALL DESCRIPTIONS

1-1. Names and Functions of Parts

Front View

①

①①

①

Hopper

The counted notes are placed in it.

②

②②

②

Auxiliary Hopper Plates

Used for leading the notes to the feeding mechanism.

③

③③

③

Keys

Refer to page 5 for description of each key.

④

④④

④

Display

The Display shows all the messages.

⑤

⑤⑤

⑤

Stacker

Counted notes are stacked onto the Stacker.

Rear View

⑥

⑥⑥

⑥

Thickness Adjustment Knob

Used to adjust the Feed Gap to make the counting smooth. To widen the Feed Gap by turning the

Knob towards “+” sign, and to narrow the Feed Gap towards “－” sign.

⑦

⑦⑦

⑦

Carrying Handle

Used for carrying the machine.

⑧

⑧⑧

⑧

Power Switch

Used to turn on or off the machine.

⑨

⑨⑨

⑨

Power Inlet

Used to connect the Power Cable.

⑩

⑩⑩

⑩

RS232 Interface

Used to connect the machine to a computer.

MNL

SPEED

1-2. Names and Functions of Keys

By this key, each counted result will be added to the previous one.

Auto start and Manual start can be selected by this key.

This key can clear counted result, batch number or exit denomination setting in that

order.

An appropriate speed can be chosen by this key, changeable in three levels (Slow,

Normal, Fast).

Used to switch the batch number between 10, 25, 50, and 100.

By this key the reference level for two sheets detection can be changed according to

the density of the notes to be counted.

By this key the machine is set to detect counterfeit notes by the detection of

fluorescence. (option)

By this key the machine is set to detect counterfeit notes without magnetism. (option)

Used to select the denomination of notes to be counted.

Used to check the total value after counting notes of the selected denomination.

Used to initiate a counting operation, or clear an error message.

To set the batch number with 0-9 keys.

BATCH

DEN

UVD

MGD

RESTART

ADD

VALUE

2. FUNCTIONS

ADD Function

Press ADD key to turn on or off this function. ADD will be shown on display when it’s

on.

Every time the machine has completed counting, the Display will show accumulated

count. Press Ckey to clear the accumulated count.

Auto and Manual Start Functions

Auto Start and Manual Start can be chosen by pressing MNLkey.

●

●●

●Auto Start

Counting starts automatically after loading notes onto the Hopper.

●

●●

●Manual Start

Start counting by pressing RESTART key.

When “MNL” is shown on the display, the Manual Start function is activated. When

MNL is not shown on the display, the Auto Start function is selected.

MNL

ADD

Counting Speed Function

An appropriate speed can be chosen by pressing this key, changeable in three levels

(Slow, Normal, Fast):

Speed-1 900 notes/min. (Slow)

Speed-11 (Default) 1200 notes/min. (Normal)

Speed -111 1600 notes/min. (Fast)

BATCH Function

Machine will count notes by batch if batch function is activated. After counting every

batch of notes, the machine will stop. Then continue the counting by taking away the

notes from the Stacker, or by pressing RESTART key.

●The BATCH key is used to set 4 pre-programmed batch numbers. The batch number will

switch among 10, 25, 50, 100 everytime BATCH key is pressed. To clear the batching, press BATCH

key for 3 seconds.

●The 0-9 keys are used to set any batch number from 0 to 999.

“BATCH” key: 10→25→50→100

SPEED

BATCH

Double Feeding Detection Function

Machine detects Double Feeding by DEN function. The detection level can be selected

by DEN key depending on the density of the notes.

Four different levels can be chosen by pressing DEN key in the following sequence:

DEN-1 →DEN-11 →DEN-111 →DEN-1111

DEN-1 Level 1: To count dark-colored (thick) notes.

DEN-11 Level 2: To count high density notes.

DEN-111 Level 3: To count median density notes.

DEN-1111 Level 4: To count light-colored (thin) notes.

OFF(Blank) When counting very dark-colord notes or very thick notes, this

function should be turned off. But machine can not detect Double

Feeding.

UV Detection Function (option)

UVD function is to detect the fluorescence on notes. A counterfeit note that generates

fluorescence under the ultraviolet rays can be detected when this function is set ON.

The machine will stop, showing message “CF1” . The suspected note is the last one in

the stacker. Take the suspected one away and press RESTART key to countinue the

counting. The suspected one isn’t included in the counted result.

Four sensitivity levels can be selected by pressing UVD key.

UVD-1→UVD-11 →UVD-111→UVD-1111

UVD-1 Level 1: To count notes of the lowest UV sensitivity level.

UVD-11 Level 2: To count notes of middle UV sensitivity level.

UVD-111 Level 3: To count notes of high UV sensitivity level.

UVD-1111 Level 4: To count notes of the highest UV sensitivity level.

OFF(Blank) Function inactive.

UVD

DEN

MG Detection Function (option)

This function is to detect the magnetism on notes. Through this function, the

machine can detect counterfeit notes without magnetism. When a counterfeit note is

detected, the machine will stop and show the error message “CF2”. The suspected note

is the last one in the stacker. Take the suspected one away and press RESTART key to

countinue the counting. The suspected one isn’t included in the counted result.

Four sensitivity levels can be selected by pressing MGD key.

MGD-1 →MGD-11 →MGD-111 →MGD-1111 →(Blank)

MGD-1 Level 1: To count notes of the lowest magnetic sensitivity level.

MGD-11 Level 2: To count notes of middle magnetic sensitivity level.

MGD-111 Level 3: To count notes of high magnetic sensitivity level.

MGD-1111 Level 4: To count notes of the highest magnetic sensitivity level.

OFF(Blank) The function should be turned off when counting notes without

magnetism.

MGD

VALUE

Value Calculation Function

This function is to select the denomination of notes to be counted and

check total value after counting notes of the selected denomination.

Step 1: Switch to the denomination of notes you are going to count by pressing “$” key.

Step 2: Count notes of the selected denomination.

Step 3: Press “VALUE” key to check the total value when counting stops.

“

” key: DNMNT 1→2→5→10→20→50→100→blank(off)

Tabla de contenidos

Otros manuales de Contadora de billetes de Ribao

Ribao

Ribao BC-40 Manual de usuario

Ribao

Ribao BC-55 Manual de usuario

Ribao

Ribao BC-55 Manual de usuario

Ribao

Ribao BC-30 Manual de usuario

Ribao

Ribao BCS-160 Manual de usuario

Ribao

Ribao BCS-160 Manual de usuario

Manuales populares de Contadora de billetes de otras marcas

BellCon

BellCon BellCount S515 Manual de usuario

Orbit Research

Orbit Research iBill Manual de usuario

Grace Technology

Grace Technology GV-870 Manual de usuario

Safescan

Safescan 2265 Manual de usuario

Mixed Bills

Mixed Bills DG 1000 Manual de usuario

Safescan

Safescan 2660-S Manual de usuario

PRO Intellect Technology

PRO Intellect Technology PRO 95U Manual de usuario

Dors

Dors 600 Manual de usuario

radiotec

radiotec rapidcount S 575 Manual de usuario

CUMMINS ALLISON

CUMMINS ALLISON JetScan Manual de usuario

PRO Intellect Technology

PRO Intellect Technology 40 NEO Manual de usuario

Conrad

Conrad 75 17 78 Manual de usuario

Total

Total M2300U Manual de capacitación

Double Power Electronics

Double Power Electronics DP-8120VB Manual de usuario

ratiotec

ratiotec Soldi Smart Plus Manual de uso y cuidado

Olympia

Olympia NC 455 Manual de usuario

Plaisio

Plaisio Q-CONNECT QCD11 Manual de usuario

Royal Sovereign

Royal Sovereign RBC-1003BK Manual de usuario