RGBlue System 01/02:re Manual de usuario
Product Number
S01RE-SNC
S01RE-PC
S02RE-SNC
S02RE-PC
S01RE-TL-SNC
S01RE-TL-PC
S02RE-TL-SNC
S02RE-TL-PC
S01RE-SB
S02RE-SB
Instruction Manual
Support Guide
For Safe Use
After-sales service
Frequently asked questions
2
Support Guide
Introduction
Thank you for purchasing this product — RGBlue System 01/02:re, RGBlue System 01/02:re Twin Light, or RGBlue
System 01/02:re Spot Beam.
Read this manual carefully before using this product.
• Duplication of the contents of this manual without permission from RGBlue is prohibited except for personal use.
• The contents of this manual may be subject to change without prior notice.
• RGBlue assumes no liability against any claim from a third party for any damage caused by improper use of
this product.
• RGBlue assumes no liability for any damage resulting from a malfunction of this product or any other reason
including disassembly, repair, or modication by a third party other than those parties designated by RGBlue.
WARNING : This product contains electronic circuitry and a lithium-ion battery. Do not attempt to disassemble or
modify it. This could pose a risk of electric shock or injury.
CAUTION : If any liquid or a foreign object gets inside the product, stop using it immediately, turn OFF the power
and contact your dealer or RGBlue.
3
Support Guide
S01RE-SNC
StandardBatteryModule BM3521S
LM5K2600S2 LM4.2K2200G2 LM5K-SP17-2
S01RE-TL-SNC
S02RE-TL-SNC
S02RE-SB
S01RE-SBS01RE-PC
S02RE-PC
S01RE-TL-PC
S02RE-TL-PC
S02RE-SNC
LargeBatteryModule BM6721L
Product Lineup
4
Support Guide
Contents
Support Guide
For Safe Use
The three basics for safe, reliable use ■ Maintenance ■ Storage ■ Transportation �����������������������5
After-sales service
Overhaul service / Parts repair ����������������������������������������������������������������������������������������������������������6
Inquiries �������������������������������������������������������������������������������������������������������������������������������������������������7
Frequently asked questions
Troubleshooting �����������������������������������������������������������������������������������������������������������������������������������8
5
Support Guide
■ Maintenance
• Even when the product is brand-new or has just been overhauled, be sure to perform maintenance on
the O-ring before use�
• Carefully remove anything attached to the product such as lint, pet hair, or sand�
• OReplace the O-ring at least once a year and keep it clean, free from dust, dirt, etc�
• Also keep the O-ring mount clean, free from dust, dirt, etc�
• Immerse the product in fresh water for at least one hour to thoroughly remove salt� When doing
so , make sure that all modules and caps are attached�
■ Storage
• Store the product in the dedicated case�
• Carefully remove any foreign material that may have gotten inside the case such as lint, pet hair, or
sand�
• Do not store the product when it is wet�
• Make sure that the interior surfaces of the caps are clean and attach them to the Light Module and
Battery module�
■ Transportation
• Put the product in the dedicated case when carrying or transporting it�
• Do not place a heavy object on the product�
• Remove all accessories when carrying or transporting the product�
For Safe Use
The three basics for safe, reliable use
6
Support Guide
After-sales service
Overhaul service
We oer an overhaul service to our customers that enables them to continue to use their SYSTEM Series
products for as long as possible. This service includes O-ring and charge terminal replacement, overpressure
valve inspection, battery refresh, and full inspection of all functions and waterproof performance. A one-year
warranty is issued after the overhaul.
One-year warranty after the overhaul
O-ring replacement
Battery refresh
All functions check
Waterproof performance check
Charge terminal replacement
Overpressure valve inspection
○ Apply for this warranty at your sales representative.
○ Eligibility for this warranty is limited to 7 years after purchase. This period may be shortened depending on
the replacement parts inventory.
Individual parts repair
Individual parts repair is also available for SYSTEM Series products.
④
⑤① ②
③
Example of repair parts
① Lock lever
② Lock ring
③ LED
④ Button
⑤ Charge terminal
Electrical contact
Electronic substrate
○ Prices will vary depending on
the condition of your product.
(e.g.：SYSTEM02:re)
(e.g.：SYSTEM02:re)
7
Support Guide
Inquiries
Warranty and After-Sale Servicing
1 Conrm that the “Date of purchase” and “Signature of dealer” are entered in the Warranty Card on the
back cover of this manual, read its terms and conditions thoroughly, and retain it carefully.
2 The warranty period is one (1) year from the date of purchase.
3 When the instrument needs servicing:
Before expiration of the warranty period : Bring the instrument to your dealer together with the
Warranty Card (this manual). We will service the instrument
according to the terms and conditions of the Warranty Card.
After expiration of the warranty period : We will service the instrument for fees provided that the
servicing is possible.
4 If you have any questions, please contact AOI Japan Co., Ltd.
AOI Japan Co., Ltd.
E-mail : info@aoi-jp�biz
Reception hours: 10:00–17:00, Monday–Friday,
(Closed: Saturday,Sunday and national holidays)
2F, Parktower Yokohama Portside 2-1 Kinko-cho, Kanagawa-ku,
Yokohama, Kanagawa, Japan 221-0056
8
Support Guide
Q� The power won’t turn on�
→ The battery may not have been charged properly. See “Q. The battery cannot be charged. ” on
page 10.
→ It is possible that the Battery Module protection circuit has been activated. Perform the recovery
procedure by following the steps below and check that all functions have been restored.
■ Recovery Function
1. Detach the Light Module and Battery Module.
2. Remove any moisture inside each module with a dry,
lint-free cloth. Let the modules dry completely.
3. Normal function will be restored when the system is
charged with the AC adapter and charge plug.
○An AC adapter is not included. Use the optional AC
adapter (RGB-PDAC01). A commercially available USB
PD AC adapter (30W, 15V, 2A) can also be used.
Frequently asked questions
Troubleshooting
If they have been exposed to salt water,
wipe the salt off with a cloth moistened
with fresh water or wash the salt under
running water, and then let them dry
completely�
9
Support Guide
Q� The power won’t turn ON even though the recovery function was executed�
→ An excessive amount of water may have penetrated between the modules, which may have
resulted in water getting inside the Light Module and/or Battery Module. Repair is required.
Q� Although the power can be turned ON, the LED light does not light and/or
brightness adjustment does not work�
→ Remove the Light Module from the Battery Module and check that the electrical contacts
(golden metal ring on the Light Module and 4 golden metal pins on the Battery Module) are
free of salt or other substances such as verdigris. If not, wipe them clean with a moistened
cloth to remove the substance and let them dry. Perform the recovery function again and
check to see if the functions have recovered.
Q� There is water leakage between the modules�
→ Check to see if the yellow O-ring of the Light Module is hardened, has lost elasticity, is
discolored, or is attened. Remove the deteriorated yellow O-ring and discard it. Clean the
O-ring groove on the Light Module and the O-ring mount on the Battery Module. Apply
a thin layer of the dedicated grease to the new yellow O-ring and mount it correctly. See
“Maintaining the O-ring” on page 9 for details. Be sure to use the RGB-OR01 O-ring.
→ Check that no foreign material (lint, pet hair, sand, etc.) has gotten inside the dedicated
case. Keep the interior of the dedicated case clean.
→ Check that the module caps are on. Place the module caps on the modules to prevent
foreign material from getting inside the product during storage or transportation.
→ Check that no foreign material (lint, pet hair, sand, etc.) is attached to the O-ring mount on
the Battery Module. Also keep the O-ring mount on the Battery Module clean.
→ Check that no foreign material (lint, pet hair, sand, etc.) is attached to the O-ring on
the Light Module. Keep the O-ring clean.
→ Check that there is no deterioration, damage, cracks, distortion, swelling, etc. on the O-ring
on the Light Module. Replace the O-ring at least once a year.
10
Support Guide
■ Maintaining the O-ring
1. Remove the O-ring with your thumb and nger.
2. Check that the O-ring is free of dirt, foreign object, crack or damage.
3. Clean the O-ring groove with a cotton swab, etc.
4. Apply special grease on the O-ring.
5. Attach the O-ring.
6. Check that the O-ring applying
surface of the Battery Module is free
of foreign object and connect the
modules.
Q� The O-ring is stretched and slack�
→ Make sure that you use RGB-SG01 genuine grease. Use of a third-party grease may
result in stretching of the O-ring and loss of elasticity, which could lead to water
leakage. Replace the O-ring with a new one.
Otros manuales para System 01/02:re
2
Este manual sirve para los siguientes modelos
12
Tabla de contenidos
Otros manuales de Iluminación subacuática de RGBlue
RGBlue
RGBlue System 01 Manual de usuario
RGBlue
RGBlue System 02 Manual de usuario
RGBlue
RGBlue LM4.2K2200G Manual de usuario
RGBlue
RGBlue System 01/02:re Manual de usuario
RGBlue
RGBlue System 01/02:re Manual de usuario
RGBlue
RGBlue SYSTEM02-2 SUPER-NATURAL COLOR Manual de usuario
RGBlue
RGBlue System 02 Premium Color Manual de usuario
RGBlue
RGBlue System 02-2 Manual de usuario
RGBlue
RGBlue System 01-3 Manual de usuario
